Author Topic: how i fixed my Mushkin Venvura Pro (Phison chip)  (Read 3537 times)

0 Members and 1 Guest are viewing this topic.

Offline vectoravtech

  • Newbie
  • *
  • Join Date: Aug 2014
  • Posts: 3
  • Karma: 1
    • View Profile
    • Avt3k
how i fixed my Mushkin Venvura Pro (Phison chip)
« on: September 16, 2014, 05:30:59 PM »
I almost had an $80 piece of plastic, I couldnt explore or format or anything.
I wasnt able to format or explore, when I was in linux I noticed the USB stick size was 0 and the name said Phison.

If you have a Phison chip like me this should be reflected here: String Manufacturer Name=TOSHIBA

I used Phison MPALL v3.63.00.. not the 3.63.0C or the 3.63.0c-DL17

Plug into a usb3.0 port.. this is critical. YOU MUST USE USB3

Copy the contents between the ===== to a new file named 2014_2251-03.ini

===========================================
[PenDriveMP]
IC Type=PS2251-03
[Parameter Mark]
Parameter Type=F1_MP_21
[Customize Info]
USB VID=0x0930
USB PID=0x1400
String Product Name=USB DISK 3.0
String Manufacturer Name=TOSHIBA
Inquiry Version=PMAP
Use30Fixture=1
IDBlkLibrary_Version=1.2.16.0
[Configuration]
Reset Serial Number=0
[TestItemOption]
Do Preformat Test=1
[Extra]
Mode=3
[Misc]
Volume Label=USB DISK
Burner Erase All=1
Wafer Erase All=1
set1667=0x00
[Advance]
FC1=0xFF
FC2=0x01
CheckLegacy=1
[Firmware]
ISP=0
===========================================

Source: http://whatrevitwants.blogspot.sg/2011/06/repurposing-autodesk-usb-media_20.html
Screenshot after the repair
« Last Edit: September 17, 2014, 10:45:24 AM by vectoravtech »
Lenovo G780 I7 cpu, 6GB system ram, 2GB Nvidia, 17 inch screen, and a Samsung 840 Pro SSD. I use Perfectdisk to keep it performing optimally.

 

anything