Main Forum > General Computer Support

Error "Windows could not connect to the system to the System Event Notification"

<< < (12/12)

Boggin:
Event Viewer should have recorded those time outs, can you check for the relevant time stamped errors to see what it has recorded ?

Julian:
oh man tmpin0 is running pretty warm the max temp at the ihs is 71.4 C for your processor...seeing that it hit 68c is really close... you may need to reapply the thermal compound. and which fan is running at 99% that's not usually a good sign mean's it's running extra hard i've known fans that have had to hit my junk pile because they ran at 99% before they quit... here is a snapshot of what mine is running at idle I don't have a stock cooler in mine i actually have a liquid cooler but at idle with yours and with stock fan it should be 45-50s on your tmpin0

Edit: ihs= integrated heat spreader.

Phillip92:
Yes tmpin0 is the problem. I found out one of my sticks of RAM was bad by manually pulling them out one by one and restarting. After that the cpu overheats within about 20 mins everytime now. tmpin0 after that was over 100c. I need to pick up some thermal compound and give that a shot. Do you need to take of the existing compound off or just reapply over it??

Boggin:
No, you need to clean off all of the old paste - here are some tips on reapplying it.

http://www.hardwaresecrets.com/what-is-the-best-way-to-apply-thermal-grease-part-1/

Julian:
any update on this?

Navigation

[0] Message Index

[*] Previous page