Main Forum > General Computer Support

[[SOLVED]] How to fix Windows 7 sleep mode issues,problems

(1/4) > >>

makinero:
How to disable the Sleep Mode?


--- Code: ---Kernel-Power
The system goes into sleep mode.

Cause: Inaction system
--- End code ---

My power plan:
Turn off the screen: Never
Put the computer to sleep: Never

Power Saver and Wake on LAN options (Intel)
Power Saver Options: ???

--- Code: ---Sets the adapter to respond to ARP requests without waking the system from sleep or hibernate. The system can remain in sleep or hibernate mode and still maintain its network presence.

--- End code ---

--- Code: ---Sets the adapter to respond to NS requests (NS requests are the IPv6 equivalent of ARP requests) without waking the system from sleep or hibernate. The system can remain in sleep or hibernate mode and still maintain its network presence.

--- End code ---

--- Code: ---Enables Energy Efficient Ethernet (EEE). EEE allows this device to transmit and receive packets with minimal bursts of energy and enter a low power state when idle.


 NOTE: Both ends of the link must have EEE enabled for this setting to be effective.
 

--- End code ---

--- Code: ---Sets the adapter to negotiate the lowest possible speed setting to save power while the computer is in standby mode.


 NOTES:

Wake on Magic Packet or Wake on Directed Packet must be enabled for this option to function.
Wake on Magic Packet from power off state has no effect on this option.
 

To support this feature, the adapter must be:

configured to automatically detect or negotiate speed.
connected to a link partner that can automatically negotiate speed.

--- End code ---

--- Code: ---Enables the Intel® System Idle Power Saver feature. Sets the adapter to negotiate the lowest possible speed setting when the system and network is idle.

To support this feature, the adapter must be:

configured to automatically detect or negotiate speed.
connected to a link partner that can automatically negotiate speed.

--- End code ---
Wake on LAN: ???

--- Code: ---Enables this device to bring the computer out of standby or hibernation when it detects a packet with a specific pattern. The specific patterns are determined by the operating system.

--- End code ---

--- Code: ---Allows the adapter to wake an Advanced Power Management (APM) enabled system from a power-off (S5) state. ACPI systems can wake from an S5 state if the system's BIOS supports it.

--- End code ---

--- Code: ---Allows the adapter to wake an Advanced Power Management (APM) enabled system when the network connection establishes link.

ACPI (Advanced Configuration and Power Interface) systems can wake from Standby (S3) or Hibernate (S4). If the system's BIOS supports it, ACPI systems can wake from a Power-off (S5) state.


 NOTES:

To wake from S5, you must enable the Wake on Magic Packet from power off state setting.
Link must be lost before the system enters an S5 state in order to wake the system with a link up event.
On Microsoft* Windows* 7, or later, you must enable Wake on Magic Packet or Wake on Pattern Match for Wake on Link to function properly.
 

--- End code ---
Too many advanced options. I do not understand!

Jethro Bodine:
Easy
Download " Don't Sleep " from here -
http://www.softwareok.com/?seite=Microsoft/DontSleep

makinero:

--- Quote from: Jethro Bodine on May 17, 2016, 09:14:49 pm ---Easy
Download " Don't Sleep " from here -
http://www.softwareok.com/?seite=Microsoft/DontSleep

--- End quote ---

This program is Not prevent my PC from going into sleep mode.
Identical to the standard action plan in Windows!
Did not work!

Power Management -> Power Saver and Wake on LAN options issue(Intel)
Note:Not Realtek

Jethro Bodine:
"This program is Not prevent my PC from going into sleep mode."

It does PRECISELY that .

Choose the configurations ( options ) that you need and it will do exactly what you want ....
..... or what you SAY you want .

If it does not work for you , the problem is NOT with the program .

Once again , a little gratitude for help received would go a long way !!

makinero:
It's a shitty program, it is not the solution to my problem.

need to set properly Power Management "Power Saver", "Wake On LAN" etc. (read post#1)

Navigation

[0] Message Index

[#] Next page