Main Forum > General Computer Support
This Dns clinet error problem haunts me. Is there a real fix?
Boggin:
Home Group is for sharing data between machines but Home network is normal for the home user - you can change that back to Home network.
I've always dealt with DHCP, so not sure how a WAN Fixed IP address works - that is set by your ISP.
Have you spoken to your ISP about this error -
Name resolution for the name _ldap._tcp.dc._msdcs.domain.name timed out after none of the configured DNS servers responded
I'll ask jpm if he has any suggestions for it.
Samson:
J, Saw this and thought it may help?
http://www.techlineinfo.com/configuration-guide-of-adsl-wifi-modem-d-link-dsl-2730-u-for-bsnl-and-mtnl/
Boggin:
--- Quote from: Samson on February 08, 2018, 11:46:27 am ---J, Saw this and thought it may help?
http://www.techlineinfo.com/configuration-guide-of-adsl-wifi-modem-d-link-dsl-2730-u-for-bsnl-and-mtnl/
--- End quote ---
ISP supplied routers usually come pre-configured and the settings in JR's router differ to those in your linked article - this may be specific to JR's ISP.
Samson:
From memory J bought the Dlink 2730U himself, not supplied by his ISP, and his ISP is BSNL...Perhaps he can confirm?
jraju:
Yes, Samson, I confirm. I bought , as bsnl router terrycom supplied the router and then vanished without any firmware update. But i configured the router, with BSNL dslam staff.
Hi, samson, Why configured dns servers shown in router, the exact ips are not shown in ipconfig /all. The dhcp, dns, and the gateway all shows my router gateway ip, 192.168.1.1
Is it correct or do have to make some changes.
Moreover i use router check beta, a nice program for the router check. Here , the configured dns server is shown as router ip, and on the details tab, it shows, the owner of the dns as Local Address, What is this. Could you explain. What is the term Local Address refers to?
But the Lilnk given by Samson, is for the older model of the same router, My router is the same having the latest model
The menus are entirelyl different.
Napt is enabled? what is that
I have by-heart the settings, Emptied the already configured data, reset the router, and then enter the vp 0vc1 35,pppoe protocol, channel llc, and then supplied my user id and pw to get internet access
i do not think that there is anything wrong in it.
But modem reboot on every logon is annoying me.
hope to get solution and details
The exact lilnk is this
https://www.meible.com/tutorials/how-to-configure-d-link-dsl-2730u-new/
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version