Main Forum > General Computer Support

This Dns clinet error problem haunts me. Is there a real fix?

<< < (2/20) > >>

jraju:
Hi, The same error continues, and i experience the same disconnect on log on.

Boggin:
And you've done all that I've suggested including changing the DNS servers in your computer ?

I'm not sure if you have this connection setting in your router but some used to have a Time out setting.

This could be set to On demand or with a Time out of 30mins.

That setting can be changed to Always on and where you just have a minutes setting, change that to 0

Let me know if your router has this setting.

jraju:
Hi, I checked the router settings and it is configured for always and the time is 0.
Before i change the dns servers, could you kindly say, if there is any miss in ipconfig /all i enclosed herewith.
It is one and the same ip, fordhcp srver, dns server and gateway. Is there any wrong in it ,
I left google dns, as it allows foreign dns servers to interfere with my network at times of a day.
It is always better to have your Isp server.
Why , the configured dns servers are not shown in ipconfig, as i have done the same in the router itself.

Boggin:
When the DNS server setting is set to auto in the computer, the boxes remain blank and will use the ones set by the router, which should then be your ISP's unless you have changed them in the router.

Your ipconfig /all is showing as correct except for the missing Physical and IPv4 addresses - have you removed those before posting ?

ISP DNS servers aren't always the best.

When I use my ISP DNS servers, I'll initially get a yellow alert on the WiFi icon on boot, but don't when using Level3's.

I've attached my ipconfig /all for Ethernet and the default ISP DNS servers.

jraju:
Hi,,Boggins , saw your reply.
But i could see the configured dns in my router, and checking that , it belongs to my ISP
Yes, i removed those things in my reply.
For your information,  i am having wifi modem , i do not know, it routes or not to call it as router. That is connected to he pc with ethernet on pppoe.
Other wifi devices get signal from this router , thro the wifi settings in the router.My router has one wan and 4 lan ports. Wan port has the telephone wire. Ethernet port is connected ot pc.
When i switch on the modem, the modem gets both dsl and internet. Even when my pc is not in use, the wiri signal is passed thro the modem .
When i connect the pc, when those are running, i think that it reallocates the device ip, in which case, it cuts and regain signal. But i found it is weird, as it is configured to get dhcp ips.
I checked internet option, router settings , as well as outer settings in pc.
please provide clues. In the mean time, i will try your 3 level dns
Is it necessary that every log on would induce the dhcp to cut and give new ips to the device connected?
P.S: I tried 3 level dns server , the problem continues

Navigation

[0] Message Index

[#] Next page

[*] Previous page