Main Forum > General Computer Support

are those ntuser.ini,ntuser.dat and netuser.dat.log generated or system files

<< < (5/7) > >>

jraju:
Hi, Boggins,
                        i checked he firmware wihe dlink. They say that i have the latest firmware.
By the By,
                          On restart of windows
                          if i remove the ethernet cable from modem, there is no problem of dsl blink and internet loss
                          If i connect the ethernet, then, i get this problem for sure.
                          Modem has no problem, as i have checked the modem with dlink centre.
Could you kindly say where to look for?
Is it in the connection between the ethernet cable  of modem and pc port
please

Boggin:
Have you tried different ports on the router ?

What I have found with Ethernet cables that I've had is the clip gets broken so it isn't locked either into the router port or the Ethernet port on the computer.

jraju:
Hi, I have checked. ofcourse, the port on pc , is showing as connected, as otherwise, i would not get ethernet/ Is it correct?
Ofcourse, the click sound is missing on that port. It was a NiC card connected to the mother board of my pc. Is there any thing i could do with some kind of attachment, llke connector on the port to reconnect the ethernet cable. I hope you understand what i mean?
How to check , if there is a kind of loose connection on that port.
Only the click sound is missing and this mother board has no showi only ng of green or amber lights as i usually got when i had the other mother board, older one.
Will this be the cause of intermittent cut on restart? please give your valuable advice.
I checked again and again, and found that this issue is occuring only if i connect the ethernet and start the pc?
The dsl light is ok and so the internet cut happens only because of loose connection or no click connection!
Is there any connector available to connect the ethernet jack outside? pl
P S: I found sound network usb adapters in google search. But my problem is, how to disable the motherboard  adapter? Moreover, will the ethernet work , if i use the usb ports to connect thro the network adapter, as it is another form of connection to the network card inside the pc.
Please give your advice on that.
PS2: I have checked by removing the ethernet end at pcs back and just plugging get me internet access and so i do not have any problem with the connection , it seems, but any how
when i restart the windows, when the windows UI is loading, the "starting windows" screen comes and four coloured icon is processed, i get this disconnection of dsl.
Does wireless devices have any thing to do with this problem.
I do not have any wireless adapter but getting wifi thro the modem

Boggin:
Have you examined the end of the Ethernet cable.

It has a spring loaded clip that locks it into the port which you have to press down to remove it.

So are you saying that when Ethernet connected the DSL light goes out on the router when the computer is first switched on and going through its boot process ?

Prior to switching on next time, check to see if the Ethernet cable is fully plugged in and secure.

With a laptop that is easily moved which can dislodge an insecure Ethernet cable but with a desktop PC, the tower wouldn't be subject to that inadvertent movement.

jraju:
So are you saying that when Ethernet connected the DSL light goes out on the router when the computer is first switched on and going through its boot process ?
Yes, this is the problem. if i remove the ethernet wire from router, then there is no blinking during the boot process and subsequent restarts.
I have checked the modem for errors , nothing, and also checked the dsl line, it is not blinking always, except for the reason i mentioned above.
i checked the ethernet wire on both sides, and found no problem of broken or wire being damaged.
When dlink checked, they found no blinking or any of the problem i mentioned in their service centre
PS: i issued command netcfg -s n,
It list all the information connected with the network
I found 3 nano adaptors entries of dlink dw131 in those. I did not know, where to find those hidden adapters. I remember that i have used the dlink nano once upon. Then i looked on network adapters in computer management. I could not find even after show all hidden devices.
Then i downloaded nirsoft usbdview and found those listed in the scan. I just deleted using that interface and now it is not shown in netcfg command.
But still the problem persists.

Navigation

[0] Message Index

[#] Next page

[*] Previous page