Main Forum > General Computer Support

How boot environment fixes MBr and rebuild bcd in already installed pc

<< < (2/2)

jraju:
Hi, the tracert command gives this result. This is for information
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\Users\battulu>tracert server.pg01.com

Tracing route to server.pg01.com [147.135.1.18]
over a maximum of 30 hops:

  1    <1 ms    <1 ms    <1 ms  192.168.1.1
  2    50 ms    44 ms    40 ms  10.208.120.1
  3    41 ms    46 ms    43 ms  static.ill.218.248.106.194/24.bsnl.in [218.248.1
06.194]
  4     *        *        *     Request timed out.
  5     *        *        *     Request timed out.
  6    81 ms    81 ms    82 ms  103.87.125.29
  7   181 ms   180 ms   181 ms  103.87.124.133
  8   181 ms   182 ms   181 ms  103.87.124.166
  9     *        *        *     Request timed out.
 10   271 ms   271 ms   270 ms  fra-fr5-sbb1-nc5.de.eu [54.36.50.242]
 11     *        *        *     Request timed out.
 12   271 ms   271 ms   271 ms  fra-fr5-sbb1-nc5.de.eu [54.36.50.242]
 13   281 ms   280 ms   281 ms  be101.sbg-g1-nc5.fr.eu [94.23.122.136]
 14   277 ms   276 ms   276 ms  par-th2-sbb1-nc5.fr.eu [54.36.50.226]
 15     *        *      281 ms  was-nva1-sbb1-8k.va.us [37.187.36.199]
 16   277 ms   310 ms   276 ms  vl1333.was1-vin1-g2-nc5.wa.us [178.32.135.155]
 17     *        *        *     Request timed out.
 18     *        *        *     Request timed out.
 19     *        *        *     Request timed out.
 20     *        *        *     Request timed out.
 21   291 ms   278 ms   278 ms  server.pg01.com [147.135.1.18]

Trace complete.

C:\Users\battulu>^A

Boggin:
If you are going to come onto the forum then there's no need to check your emails.

You would need to boot up with install media to run a Startup Repair as it can only be accessed from Repair your computer.

The bootrec and fix mbr cmds would automatically execute on where the volume is installed.

Can you post a link to a website where it advises to change from x:sources to c:

Even when I run a sfc /scannow after booting up with install media, I enter the cmd from the default prompt but first run the cmd bcdedit |find "osdevice" and then I would use that partition letter instead of the X I have exampled in the following cmd -

sfc /scannow /offbootdir=X:\ /offwindir=X:\

For clarity that is a Pipe symbol before find and is the upper case of \

jraju:
Hi, Thanks, Boggins.
The above tracert is for the owner of the site , of how it travels from my pc.
Thanks for the command and also for the tip , that it automatically finds the volume to activate the command.
What is the sfc scan offboot.
Do we need to scan the computer offline.
I hear that for the first time .
I usually use sfc on running windows only.
For a troubleshoot query, one answer was given as change to c: from X: , I will try to send the link. This is when i search the google for bootmgr is missing error I had .
I will try this command from recovery mode .
Please tell me about sfc offboot dir
thanks for all the tips

Boggin:
The sfc offboot cmd is when you are repairing the volume using the install media.

Navigation

[0] Message Index

[*] Previous page