Messages

76

General Computer Support / How to (FAST) add many html files?

« on: June 23, 2020, 04:40:38 am »

How to (FAST) add many files (merge html)?


I have a good tool to combine, but adding 10,000 files for a long time!
I am looking for a faster tool with an efficient engine / threads.

77

General Computer Support / Re: Paged Pool used 9 GB RAM all time!

« on: June 14, 2020, 07:11:24 am »

My problem High use Page Pool:

https://answers.microsoft.com/en-us/windows/forum/all/fltmgrsys-causing-very-high-paged-pool-memory-use/851cb867-b2a7-40df-91ab-acc29185c9c9

https://superuser.com/questions/1263991/huge-paged-pool-probably-caused-by-fltmgr-sys-what-to-do?noredirect=1&lq=1

I uninstalled the Wise Hide Folder Pro.
Memory usage does not increase after closing Chrome.

78

General Computer Support / Re: Paged Pool used 9 GB RAM all time!

« on: June 14, 2020, 04:57:47 am »

I have nothing more to add - I'm more than happy the way my IE works in Win 10.

I can’t access the site from Internet Explorer

Unfortunately, using WEBSITE using Internet Explorer will no longer work.

The latest version of the browser was developed back in 2015. In parallel with this, Microsoft began to actively develop Edge, which is what they are doing now.

The latest version of Internet Explorer has not been fully modified for many years. Therefore, security problems and restrictions on the part of web developers are expected to occur. Microsoft recently issued a recommendation to abandon IE

79

General Computer Support / Re: Paged Pool used 9 GB RAM all time!

« on: June 14, 2020, 03:37:47 am »

He searched the internet, I found one of the better extensions in my opinion compared to the "Suspend Tab" type.

80

General Computer Support / Re: Paged Pool used 9 GB RAM all time!

« on: June 14, 2020, 01:14:36 am »

Generally, I don't have problems with Chrome if I set up a huge swap file.
For small SSDs, setting a large virtual file will run out of space for other programs and files.
You can have up to 32 / 64 / 128 GB RAM, but Chrome will still need to set up a huge swap file. Implementation of separate memory processes means it uses lots of memory when you open many tabs. This can cause performance hiccups for users who don’t have enough PAGE FILE on their computers. So if the page file is so slow, why even have it? Without a page file, your applications will crash or seriously malfunction, as any additional information that needs to be stored in RAM will simply be lost. Having a bit of slowdown to handle peak RAM demands is better than having the system go down as a whole.

IE is an outdated browser and most sites that I use no longer support this browser and will not open the page!


All extensions are very bad because they add the extension address to the address and modify it, you don't know exactly what the address is.
And no automatic loading when you click the tab.
As I need freezing, not suspend.
https://chrome.google.com/webstore/search/tab%20suspend?hl=pl

81

General Computer Support / Re: Paged Pool used 9 GB RAM all time!

« on: June 12, 2020, 09:54:19 am »

What IE ha, ha, ha!!!!?!
IE = super slow open webpage/crash browser if large or JS
Chrome = superfast open any website
Are you a serious man? chrome is the best browser in the world, if you think otherwise, you live in a matrix... I use so many extension Chrome useful that it doesn't fit in the imagination

82

General Computer Support / Re: Paged Pool used 9 GB RAM all time!

« on: June 12, 2020, 12:46:41 am »

Boggin - Kaspersky - as usual FALSE...
The site is completely secure because it's popular image hosting.
There is still a memory leak in Chrome.
Version 78 or 79 Chrome had a memory control function, but in newer versions they removed this feature.
The previous solution solves the problem only partially, but when Chrome is running for a long time, the more memory leaks.
I guess I'll have to go back to the old version of Chrome.

https://i0.wp.com/hackersonlineclub.com/wp-content/uploads/2019/12/Chrome-Tab-Freeze.png?resize=837%2C375&ssl=1

or maybe hmm...
Chrome:

Click: "[Urgent discard a tab now]"

Code: [Select]

chrome://discards/
https://developers.google.com/web/updates/2015/09/tab-discarding

Inspiration: hey there, great suspender
If tab discarding sounds familiar, it's because you've probably come across useful Chrome extensions that give you a slightly simpler version of this idea, such as the The Great Suspender. The Great Suspender aims to reduce Chrome's memory and GPU footprint by suspending tabs after a custom period of inactivity.

83

General Computer Support / Re: Paged Pool used 9 GB RAM all time!

« on: June 11, 2020, 04:23:53 am »

No, you misunderstood.
The program was not the cause of the problem, but it allowed to verify which settings exist in the System, which are actually already enabled.
The program simply confidently modifies something in the registry or uses some commands that allow you to optimize the System.
I downloaded the program, because probably only the only program that easily turned off the settings.
I don't know the commands CMD or the appropriate "Memory Management" settings (System registry and everything related to Page Pool) - if you have knowledge about this topic, share it.

And please screenshot:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management

https://i.postimg.cc/V6wghDmg/Screen-Shot-06-11-20-at-01-19-PM.jpg

84

General Computer Support / Re: Paged Pool used 9 GB RAM all time!

« on: June 11, 2020, 02:50:56 am »

When running (JVM) Java and Google Chrome etc. are stored in kernel memory, the pools are inherently available in all. Data can never be flushed to the hard drive and is always kept in physical memory.
Of course, this seems to cause a huge increase in speed, but it causes other applications not to have enough memory to run.
If  have an SSD,  do not need this default option in Windows 7 x64, because the speed is still high.

Boggin - I downloaded the program.
it showed me that many "Tweak" options have already been enabled by default in the system.
I turned it off and it's OK now.

All programs closed, and still using 11GB.
https://postimg.cc/hX3gzHt8

But now it's fine when turned off.

85

General Computer Support / Re: Paged Pool used 9 GB RAM all time!

« on: June 10, 2020, 03:46:03 pm »

Task Manager or Process Explorer will not show what is being loaded into physical memory. It can be all DLLs, drivers (*.sys) etc.
But it can also be Java, so the browser uses a lot of memory. Memory Not Release when use Java or JavaScript (Social-Media).

I turned off the default setting, it's fine now. The memory is being released, we'll see how the computer will work for hours.


I found interesting help and information

https://documentation.suse.com/sles/12-SP4/html/SLES-all/cha-tuning-memory.html

This problem is known in Linux (etc.)
Very strange that it occurs even on my Windows 7 system

86

General Computer Support / Re: Paged Pool used 9 GB RAM all time!

« on: June 10, 2020, 02:50:36 pm »

I do not change anything and do not install on the computer for a long time.
But I noticed that my computer speed up many times. So probably Windows files, drivers load into memory.
I have now downloaded the Windows optimization program: "Mz RAM Booster"and it was turned on by default:
[ ] Always Keep Windows Kernel In Memory.
Does the Tweaking tool or script allow you to optimize or disable it completely?

87

General Computer Support / [SOLVED] Paged Pool used 9 GB RAM all time!

« on: June 10, 2020, 01:58:45 pm »

After closing all programs. I mostly use only Chrome. RAM usage is still high, even though I have 20 GB RAM.
My problem is very unique.
Most people have problems with Non-Paged or Standby.
I have a problem with Paged Pool.
Unfortunately, there is nowhere on Google to solve this type of problem.

Paged Pool used 9GB RAM all time!
Restarting the computer only helps temporarily

There were no changes in the computer, the computer works very fast, but all the time informs that there is a not enough of memory in the system (after a few hours of work!)

Paged Pool = Kernel Memory


CMci 9GB RAM


My Virtual Memory: Min 2048 MB Max 2048 MB

88

General Computer Support / Re: Problem BSOD MEMORY_MANAGEMENT / Komputer jest mało pamięci (20 GB pamięci RAM!!!)

« on: April 14, 2020, 12:25:14 pm »

I deleted two System files (.*sys)
And the Blue Screen of Death has been gone for a long time.

89

General Computer Support / Re: BSOD issue MEMORY_MANAGEMENT / Your Computer is Low on Memory (20 GB RAM!!!)

« on: April 03, 2020, 04:14:33 am »

Firefox immediately freezes tabs every time start/run Firefox, so you can have 1000 tabs and use only 1GB RAM. And the browser does not crash or stability problems do not occur.
1000 tabs seems to be a lot, but it's just for testing... and not problem here...

90

General Computer Support / Re: BSOD issue MEMORY_MANAGEMENT / Your Computer is Low on Memory (20 GB RAM!!!)

« on: April 03, 2020, 02:24:13 am »

Boggin-


Unfortunately, this problem only since Chrome version 80. (Not availabale Tab Freeze)
Earlier this problem did not occur (version 79) because it had a new feature that reduced the use of pagefile.sys
https://www.tenforums.com/tutorials/146276-how-enable-disable-tab-freezing-google-chrome.html

It has nothing to do with all the 'freezing of tabs' extension because it causes the extension names to be added to the links and refresh required.
That function in Chrome, as in Firefox was better.

91

General Computer Support / Re: BSOD issue MEMORY_MANAGEMENT / Your Computer is Low on Memory (20 GB RAM!!!)

« on: March 27, 2020, 02:40:52 pm »

The file is not outdated, because this file has always existed from the beginning and there was never a problem.
And UAC enabled at a high level will never allow a computer infection, because I have never had such cases I have ever enabled et perfect security, and the ESET package and all "Windows Update" security up to date.
The problem seems to be rather that Chrome-based browsers are using too much virtual memory, even if you have a lot of physical memory.
The more physical memory you have, the more Chrome will use virtual memory C:\pagefile.sys, and that's true because the size increases when you run Chrome, Edge or Chromium or Opera.
I bought even more physical memory and an even bigger problem.
This problem does not occur in Firefox.

Set: Automatic pagefile size

92

General Computer Support / BSOD issue MEMORY_MANAGEMENT / Your Computer is Low on Memory (20 GB RAM!!!)

« on: March 18, 2020, 08:50:51 am »

How to solve a constantly recurring BSOD? WINDOWS 7 64-BIT
All ways fail. RAM memory - all the time it shows that there were NO errors found. (MemTest86+), Windows Check Memory...
Problem with the driver.
Although this is not necessarily about this driver, just how the system's memory is managed.
The problem causes when the Chrome or Edge browser is running, this error occurs only once every day.

Also, "torturing" the tests does not indicate that any problem with memory, cpu, temperatures are super low.
Safe Boot /Disable Services, only Run Windows Services = not solved problem


20 GB RAM.

ANTIVIRUS NO INFECTION

CHKDSK /R /F = NO ERRORS.
SMART = NO PROBLEM. DISK GOOD STATUS
SFC /SCANNOW and SFC /VERIFYONLY = NO PROBLEM DETEC. 100% INTEGRIYY SYSTEM

Your computer is out of memory

93

Tweaking.com Support & Help / Re: Windows Repair 4.4.7 - The app can not be repaired!

« on: April 08, 2019, 10:02:15 am »

But I do not have a damaged WMI, as indicated by various special diagnostic tools. So in this case, it's not recommended, because the result will be the same.
My problem only affects the error in CoreAgnt.dll
BAD_INSTRUCTION_PTR_c0000005_CoreAgnt.dll!Unloaded
Of course, it is not damaged, but for some reason you can not load this module correctly.

94

Tweaking.com Support & Help / Re: Windows Repair 4.4.7 - The app can not be repaired!

« on: April 08, 2019, 07:24:49 am »

SFC /SCANNOW - Always shows that everything is OK!
WR in any version can not fix many problems, and it will not fix it, even though it has such repair options. The error was, is and still will probably remain, and occurs from time to time at an unexpected moment.
But as I can see that many users publish similar errors on different websites and there are no final solutions.

95

Tweaking.com Support & Help / Windows Repair 4.4.7 - The app can not be repaired!

« on: April 07, 2019, 12:29:54 am »

WR - The app can not be repaired!
Win 7
Nazwa aplikacji powodującej błąd: WmiPrvSE.exe, wersja: 10.0.10586.117, sygnatura czasowa: 0x56bf013f
Nazwa modułu powodującego błąd: CoreAgnt.dll_unloaded, wersja: 0.0.0.0, sygnatura czasowa: 0x5c1bf2c4
Kod wyjątku: 0xc0000005
Przesunięcie błędu: 0x000007fee81f7dc8
Identyfikator procesu powodującego błąd: 0xb98
Godzina uruchomienia aplikacji powodującej błąd: 0x01d4ed0edaa4a91d
Ścieżka aplikacji powodującej błąd: C:\Windows\System32\wbem\WmiPrvSE.exe
Ścieżka modułu powodującego błąd: CoreAgnt.dll
Identyfikator raportu: 7a0ad71e-5904-11e9-a0ca-0862662a261f

Code: [Select]

*******************************************************************************
*                                                                             *
*                        Exception Analysis                                   *
*                                                                             *
*******************************************************************************

*** ERROR: Module load completed but symbols could not be loaded for WmiPrvSE.exe
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ncobjapi.dll -
Unable to load image CoreAgnt.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for CoreAgnt.dll
*** ERROR: Module load completed but symbols could not be loaded for CoreAgnt.dll

KEY_VALUES_STRING: 1


STACKHASH_ANALYSIS: 1

TIMELINE_ANALYSIS: 1

Timeline: !analyze.Start
    Name: <blank>
    Time: 2019-04-07T07:19:00.732Z
    Diff: 402732 mSec

Timeline: Dump.Current
    Name: <blank>
    Time: 2019-04-07T07:12:18.0Z
    Diff: 0 mSec

Timeline: Process.Start
    Name: <blank>
    Time: 2019-04-07T06:55:15.0Z
    Diff: 1023000 mSec

Timeline: OS.Boot
    Name: <blank>
    Time: 2019-04-07T06:54:56.0Z
    Diff: 1042000 mSec


DUMP_CLASS: 2

DUMP_QUALIFIER: 400

CONTEXT:  (.ecxr)
rax=0000000000000001 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000000000 rdi=00000000012afa78
rip=000007fee81f7dc8 rsp=00000000012af9e0 rbp=0000000000000000
 r8=0000000000000000  r9=0000000000000000 r10=000007fefd2010d8
r11=0000079300ae0076 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe nc
cs=0033  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00010200
CoreAgnt+0x77dc8:
000007fe`e81f7dc8 ??              ???
Resetting default scope

FAULTING_IP:
CoreAgnt.dll!Unloaded+77dc8
000007fe`e81f7dc8 ??              ???

EXCEPTION_RECORD:  (.exr -1)
ExceptionAddress: 000007fee81f7dc8 (CoreAgnt+0x0000000000077dc8)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000008
   Parameter[1]: 000007fee81f7dc8
Attempt to execute non-executable address 000007fee81f7dc8

DEFAULT_BUCKET_ID:  BAD_INSTRUCTION_PTR

FOLLOWUP_IP:
CoreAgnt.dll!Unloaded+77dc8
000007fe`e81f7dc8 ??              ???

EXECUTE_ADDRESS: 7fee81f7dc8

FAILED_INSTRUCTION_ADDRESS:
CoreAgnt.dll!Unloaded+77dc8
000007fe`e81f7dc8 ??              ???

ERROR_CODE: (NTSTATUS) 0xc0000005 - <Unable to get error code text>

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - <Unable to get error code text>

EXCEPTION_CODE_STR:  c0000005

EXCEPTION_PARAMETER1:  0000000000000008

EXCEPTION_PARAMETER2:  000007fee81f7dc8

WATSON_BKT_PROCSTAMP:  56bf013f

WATSON_BKT_PROCVER:  10.0.10586.117

PROCESS_VER_PRODUCT:  Microsoft® Windows® Operating System

WATSON_BKT_MODULE:  unknown

WATSON_BKT_MODVER:  0.0.0.0

WATSON_BKT_MODOFFSET:  e81f7dc8

BUILD_VERSION_STRING:  6.1.7601.24388 (win7sp1_ldr_escrow.190311-1905)

MODLIST_WITH_TSCHKSUM_HASH:  ef6919961c9eb847aa75fa4e2ea8e82ff0c08af3

MODLIST_SHA1_HASH:  a5e6c187e975f46691f8d591620b99a12e744bb8

NTGLOBALFLAG:  0

PROCESS_BAM_CURRENT_THROTTLED: 0

PROCESS_BAM_PREVIOUS_THROTTLED: 0

APPLICATION_VERIFIER_FLAGS:  0

PRODUCT_TYPE:  1

SUITE_MASK:  272

DUMP_FLAGS:  d96

DUMP_TYPE:  0

PROCESS_NAME:  unknown

ANALYSIS_SESSION_HOST:  KOMPUTER

ANALYSIS_SESSION_TIME:  04-07-2019 09:19:00.0732

ANALYSIS_VERSION: 10.0.17763.132 amd64fre

THREAD_ATTRIBUTES:
OS_LOCALE:  PLK

BUGCHECK_STR:  APPLICATION_FAULT_BAD_INSTRUCTION_PTR_SOFTWARE_NX_FAULT_INVALID_POINTER_EXECUTE

PRIMARY_PROBLEM_CLASS:  APPLICATION_FAULT

PROBLEM_CLASSES:

    ID:     [0n313]
    Type:   [@ACCESS_VIOLATION]
    Class:  Addendum
    Scope:  BUCKET_ID
    Name:   Omit
    Data:   Omit
    PID:    [Unspecified]
    TID:    [0xc08]
    Frame:  [0] : CoreAgnt.dll!Unloaded

    ID:     [0n287]
    Type:   [INVALID_POINTER_EXECUTE]
    Class:  Primary
    Scope:  BUCKET_ID
    Name:   Add
    Data:   Omit
    PID:    [Unspecified]
    TID:    [0xc08]
    Frame:  [0] : CoreAgnt.dll!Unloaded

    ID:     [0n295]
    Type:   [SOFTWARE_NX_FAULT]
    Class:  Primary
    Scope:  BUCKET_ID
    Name:   Add
    Data:   Omit
    PID:    [0xb98]
    TID:    [0xc08]
    Frame:  [0] : CoreAgnt.dll!Unloaded

    ID:     [0n296]
    Type:   [BAD_INSTRUCTION_PTR]
    Class:  Primary
    Scope:  DEFAULT_BUCKET_ID (Failure Bucket ID prefix)
            BUCKET_ID
    Name:   Add
    Data:   Omit
    PID:    [0xb98]
    TID:    [0xc08]
    Frame:  [0] : CoreAgnt.dll!Unloaded

LAST_CONTROL_TRANSFER:  from 0000000000000000 to 000007fee81f7dc8

STACK_TEXT: 
00000000`012af9e0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : CoreAgnt+0x77dc8


THREAD_SHA1_HASH_MOD_FUNC:  5d028f64e3909d2ad74b8fb982f9036aa97531fd

THREAD_SHA1_HASH_MOD_FUNC_OFFSET:  c4b4f1f6823eb837ec0b5a2fc0a9d950e90c5b31

THREAD_SHA1_HASH_MOD:  7bf4e5aa7b0a035cb58cdc86181a7273d2a83a11

SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  CoreAgnt.dll!Unloaded+77dc8

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: CoreAgnt

IMAGE_NAME:  CoreAgnt.dll

DEBUG_FLR_IMAGE_TIMESTAMP:  5c1bf2c4

STACK_COMMAND:  ~4s ; .ecxr ; kb

FAILURE_BUCKET_ID:  BAD_INSTRUCTION_PTR_c0000005_CoreAgnt.dll!Unloaded

BUCKET_ID:  X64_APPLICATION_FAULT_BAD_INSTRUCTION_PTR_SOFTWARE_NX_FAULT_INVALID_POINTER_EXECUTE_BAD_IP_CoreAgnt.dll!Unloaded+77dc8

FAILURE_EXCEPTION_CODE:  c0000005

FAILURE_IMAGE_NAME:  CoreAgnt.dll

BUCKET_ID_IMAGE_STR:  CoreAgnt.dll

FAILURE_MODULE_NAME:  CoreAgnt

BUCKET_ID_MODULE_STR:  CoreAgnt

FAILURE_FUNCTION_NAME:  Unloaded

BUCKET_ID_FUNCTION_STR:  Unloaded

BUCKET_ID_OFFSET:  77dc8

BUCKET_ID_MODTIMEDATESTAMP:  5c1bf2c4

BUCKET_ID_MODCHECKSUM:  0

BUCKET_ID_MODVER_STR:  0.0.0.0

BUCKET_ID_PREFIX_STR:  X64_APPLICATION_FAULT_BAD_INSTRUCTION_PTR_SOFTWARE_NX_FAULT_INVALID_POINTER_EXECUTE_BAD_IP_

FAILURE_PROBLEM_CLASS:  APPLICATION_FAULT

FAILURE_SYMBOL_NAME:  CoreAgnt.dll!Unloaded

TARGET_TIME:  2019-04-07T07:12:18.000Z

OSBUILD:  7601

OSSERVICEPACK:  24388

SERVICEPACK_NUMBER: 0

OS_REVISION: 0

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 7

OSEDITION:  Windows 7 WinNt (Service Pack 1) SingleUserTS

USER_LCID:  0

OSBUILD_TIMESTAMP:  2019-03-12 05:16:34

BUILDDATESTAMP_STR:  190311-1905

BUILDLAB_STR:  win7sp1_ldr_escrow

BUILDOSVER_STR:  6.1.7601.24388

ANALYSIS_SESSION_ELAPSED_TIME:  1653

ANALYSIS_SOURCE:  UM

FAILURE_ID_HASH_STRING:  um:bad_instruction_ptr_c0000005_coreagnt.dll!unloaded

FAILURE_ID_HASH:  {f00aa262-5c6d-2008-8027-e22d2939859b}

Followup:     MachineOwner


96

General Computer Support / Re: Over 500 corrupt package files

« on: December 09, 2018, 07:51:18 am »

Download and install:

https://www.microsoft.com/pl-pl/download/details.aspx?id=20858

97

General Computer Support / How to find only a specific name on the disk?

« on: December 09, 2018, 07:46:24 am »

How to find only a specific name on the disk.
The name is unique because it contains only a "dot"
Filename:

Code: [Select]

.

Code: [Select]

..ext
I tested a lot of different regular expressions, but none of them work correctly.

98

Tweaking.com Support & Help / Re: How do I restore the default "autocheck" in the registry?

« on: October 19, 2018, 09:31:09 am »

But why? "you're doing a full Registry search"
This application only deletes entries, nothing more, it is not needed, unless some entries can not be removed in a standard way.
Think about it...

99

Tweaking.com Support & Help / Re: How do I restore the default "autocheck" in the registry?

« on: October 19, 2018, 06:27:44 am »

For what use?

100

Tweaking.com Support & Help / Re: How do I restore the default "autocheck" in the registry?

« on: October 18, 2018, 07:01:23 am »

Jump TO Entry

BootExecute:

Code: [Select]

autoche
????
???
???
0#
autocheic

EDIT:


Give ME all default entries in SessionManager

Code: [Select]

BootExecute
SetupExecute
Execute
A0InitialCommand
and

Code: [Select]

ServiceControlManagerExtension
Although it seems to me that I solved the problem myself, but I want to make sure.