Messages

26

General Computer Support / Re: Windows 7 - file and printer sharing will not turn on and stay on

« on: November 06, 2015, 08:23:38 pm »

I had SMB 1 showing under parameters in the left hand pane but not in the right hand pane. I will change and see what that does.  No change.

27

General Computer Support / Re: Windows 7 - file and printer sharing will not turn on and stay on

« on: November 06, 2015, 03:27:37 pm »

Thanks, I will check to see if it matches what I did when I get back. Thanks

28

General Computer Support / Re: Windows 7 - file and printer sharing will not turn on and stay on

« on: November 06, 2015, 01:04:34 pm »

Error: The Server service depends on the Server SMB 1.xxx driver service which failed to start because the dependency service or group failed to start.
Also did everything in - In Event Viewer is anything listed for svrnet ?

http://batcmd.com/windows/7/services/srvnet/

Still no positive result.

You know, I believe I saw another thread on this problem where the problem was supposedly solved but there was no explanation as to how it was done; Shane I think.

29

General Computer Support / Re: Windows 7 - file and printer sharing will not turn on and stay on

« on: November 06, 2015, 09:26:25 am »

If I could see a picture of what the registry is supposed to look like after the changes are made as in the article above then I could tell if I have done them right. Thanks   

To enable or disable SMBv1 on the SMB server, configure the following registry key:
Registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters
Registry entry: SMB1
REG_DWORD: 0 = Disabled
REG_DWORD: 1 = Enabled
Default: 1 = Enabled
To enable or disable SMBv2 on the SMB server, configure the following registry key:
Registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters
Registry entry: SMB2
REG_DWORD: 0 = Disabled
REG_DWORD: 1 = Enabled
Default: 1 = Enabled

The snipping tool does not work so I can't take a picture of my work to show you.

30

General Computer Support / Re: Windows 7 - file and printer sharing will not turn on and stay on

« on: November 06, 2015, 08:46:22 am »

still getting the 1068 error. Right clicked on Parameters and added a new DWORD Value and restarted the system.

31

General Computer Support / Re: Windows 7 - file and printer sharing will not turn on and stay on

« on: November 06, 2015, 08:17:27 am »

Did that and assuming I did it right still no go. Thanks

32

General Computer Support / Re: Windows 7 - file and printer sharing will not turn on and stay on

« on: November 06, 2015, 07:08:18 am »

Error 1068; both showing as local system; the only yellow alert is microsoft teredo tunneling adapter which has been there a long time; tried restore points and they did not help. Thanks  Also Rapport EI64 has a yellow alert code 24 - This device is not present, is not working properly, or does not have all its drivers installed.

33

General Computer Support / Re: Windows 7 - file and printer sharing will not turn on and stay on

« on: November 05, 2015, 04:25:03 pm »

Security Accounts Manager is showing as Started and Auto. File and Printer sharing still dead.

34

General Computer Support / Re: Windows 7 - file and printer sharing will not turn on and stay on

« on: November 05, 2015, 03:26:04 pm »

computer browser and server will not start. AV program is mse

35

General Computer Support / Re: Windows 7 - file and printer sharing will not turn on and stay on

« on: November 05, 2015, 03:02:34 pm »

I tried with both turned off but no go.

36

General Computer Support / Windows 7 - file and printer sharing will not turn on and stay on

« on: November 05, 2015, 01:11:31 pm »

Shane, I have a problem in that Windows 7 file and printer sharing will not turn on and stay on. I have tried tweaking.com windows repair. Any other ideas?
In the advanced sharing settings in the network and sharing center - Under file and printer sharing
the selection turn on file and printer sharing will check but when you click save changes, the selection is not saved.