Show Posts
1
Tweaking.com Support & Help / Many issues and a suggestion
« on: October 20, 2015, 11:39:03 am »
Greetings Shane, the forums' readers & helpers, ٩̢ ̗(Ӧ̮Ӧ)̢ ̗۶
Thanks for sharing your incredible work that is so priced around the world. After having red many positive critiques, ¿̒ ̡͡ ʅ I decided to give it a try because my laptop is really a mess โ̢ ̗(͠❂ֹ̰̃ ̰͠❂ֹ̃)̢ ̗۶‼ I am on “Windows 8 Pro with Media Center”. I made a full scan with “Registry First Aid 9.3” just before I installed your software. Here are the results:
Invalid Paths: 2125
Invalid file associations: 68
References ActiveX / COM invalid: 346
Invalid Help Files: 4
Unused software entries: 7
Uninstall invalid entries: 1657
Total: 4207
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
After all the steps of Windows Repair v3.6.1 once:
Invalid Paths: 2132 (+7)
Invalid file associations: 52 (-16)
References ActiveX / COM invalid: 346
Invalid Help Files: 4
Unused software entries: 7
Uninstall invalid entries: 1642 (-15)
Total: 4202 (-5)
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
After all the steps of Windows Repair a third time:
Invalid Paths: 2202 (+70)
Invalid file associations: 52
References ActiveX / COM invalid: 346
Invalid Help Files: 4
Unused software entries: 8 (+1)
Uninstall invalid entries: 1642
Total: 4272 (+70)
I was surprised that “Windows Repair v3.6.1” did not take care of those‼
—————————— —————————— ——————————
“Remote Access Connection”
Service name: PPPoE
Something tries to connect me twice during the launch of your Windows Repair. Then, no more request after those in the Safe Mode. Sometime in Windows normal mode, I get that request even if I'm already connected with my telephone company that do not use PPPoE protocol.
Is Windows Repair trying to connect me?
Shall I delete that PPPoE stuff?
Attach: "Remote Access Connection1.png" and "Remote Access Connection2.png"
—————————— —————————— ——————————
Step 1: “ Do A Proper Power Reset First! ”
٩̢ ̗(̾̈́͡◑̾̈́̈́͜ ̾̈́̈́͡◑̾̈́)̢ ̗۶̑ That is well explained -̀ˁ̺̍ˀ-́ . But clicking "yes" on the “Reboot Now?” doesn't give us the time to unplug the computer as recommended. It just reboot immediately. Instead, I have to click on "No", then shut it down as usual and then unplug it.
I suggest you to change it to something like:
“Safe Mode Set! Would you like to shut down, unplug for a while, then reboot?”
Attach: "Reboot Now.png"
—————————— —————————— ——————————
Step 2: “ Windows Packages Files ”
How do I know if any of those are missing? Because 90% of the time on Windows Update, I get an Error #…
—————————— —————————— ——————————
Step 3: After the Check Disk, right after the "View log", it is written in blue:
"No Error Found On The Drive!" But it ain't so in the log:
...
—————————— —————————— ——————————
Step 4: “ System file check ” log
C:\Windows\Logs\CBS\CBS.log
See "Cannot repair member file…", "hash mismatch…" and "do not match actual file "
There are a lot of "[DIRSD OWNER WARNING] Directory …" and other "WARNING: File […". Should we worry about them?
—————————— —————————— ——————————
In “Repair Reparse Points”
Is it possible that the "Error: 0 - Access denied" when we run the program the second time might comes from the instruction:
"Setting Owner To System And Everyone Read Access To Denied" ?
—————————— —————————— ——————————
Regards, ¿̒ ̡͡ ʅ
Daniel ⌢ ◦ ⌢ ♬
follow me on Facebook
ॐ God bless you ‼ ≈̰ ̃(ړײ ) ̰͠〰 ❤
Thanks for sharing your incredible work that is so priced around the world. After having red many positive critiques, ¿̒ ̡͡ ʅ I decided to give it a try because my laptop is really a mess โ̢ ̗(͠❂ֹ̰̃ ̰͠❂ֹ̃)̢ ̗۶‼ I am on “Windows 8 Pro with Media Center”. I made a full scan with “Registry First Aid 9.3” just before I installed your software. Here are the results:
Invalid Paths: 2125
Invalid file associations: 68
References ActiveX / COM invalid: 346
Invalid Help Files: 4
Unused software entries: 7
Uninstall invalid entries: 1657
Total: 4207
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
After all the steps of Windows Repair v3.6.1 once:
Invalid Paths: 2132 (+7)
Invalid file associations: 52 (-16)
References ActiveX / COM invalid: 346
Invalid Help Files: 4
Unused software entries: 7
Uninstall invalid entries: 1642 (-15)
Total: 4202 (-5)
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
After all the steps of Windows Repair a third time:
Invalid Paths: 2202 (+70)
Invalid file associations: 52
References ActiveX / COM invalid: 346
Invalid Help Files: 4
Unused software entries: 8 (+1)
Uninstall invalid entries: 1642
Total: 4272 (+70)
I was surprised that “Windows Repair v3.6.1” did not take care of those‼
—————————— —————————— ——————————
“Remote Access Connection”
Service name: PPPoE
Something tries to connect me twice during the launch of your Windows Repair. Then, no more request after those in the Safe Mode. Sometime in Windows normal mode, I get that request even if I'm already connected with my telephone company that do not use PPPoE protocol.
Is Windows Repair trying to connect me?
Shall I delete that PPPoE stuff?
Attach: "Remote Access Connection1.png" and "Remote Access Connection2.png"
—————————— —————————— ——————————
Step 1: “ Do A Proper Power Reset First! ”
٩̢ ̗(̾̈́͡◑̾̈́̈́͜ ̾̈́̈́͡◑̾̈́)̢ ̗۶̑ That is well explained -̀ˁ̺̍ˀ-́ . But clicking "yes" on the “Reboot Now?” doesn't give us the time to unplug the computer as recommended. It just reboot immediately. Instead, I have to click on "No", then shut it down as usual and then unplug it.
I suggest you to change it to something like:
“Safe Mode Set! Would you like to shut down, unplug for a while, then reboot?”
Attach: "Reboot Now.png"
—————————— —————————— ——————————
Step 2: “ Windows Packages Files ”
How do I know if any of those are missing? Because 90% of the time on Windows Update, I get an Error #…
—————————— —————————— ——————————
Step 3: After the Check Disk, right after the "View log", it is written in blue:
"No Error Found On The Drive!" But it ain't so in the log:
...
Code: [Select]
41% complete. (341144 index entries on processed 430520)
The CHKDSK.EXE-2E757381.pf index entry of $ I30 of the file 80750 is not correct.
The CHKDSK input ~ 1.PF index $ I30 of the file 80750 is not correct.
41% complete. (341 526 index entries on processed 430520)...—————————— —————————— ——————————
Step 4: “ System file check ” log
C:\Windows\Logs\CBS\CBS.log
See "Cannot repair member file…", "hash mismatch…" and "do not match actual file "
Code: [Select]
2015-10-18 06:52:34, Info CSI 000004ec [SR] Verifying 100 (0x0000000000000064) components
2015-10-18 06:52:34, Info CSI 000004ed [SR] Beginning Verify and Repair transaction
2015-10-18 06:52:35, Info CSI 000004ee Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.2.9200.16430_none_fdce12188b615b12\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" :
Found: {l:32 b:DlDsw0gnmHvb09gSf4tmlj4x7suVwNkLMYsvUZoCR6U=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}
2015-10-18 06:52:35, Info CSI 000004ef [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.2.9200.16430, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-10-18 06:52:43, Info CSI 000004f0 Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.2.9200.16430_none_fdce12188b615b12\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" :
Found: {l:32 b:DlDsw0gnmHvb09gSf4tmlj4x7suVwNkLMYsvUZoCR6U=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}
2015-10-18 06:52:43, Info CSI 000004f1 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.2.9200.16430, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-10-18 06:52:43, Info CSI 000004f2 [SR] This component was referenced by [l:164{82}]"Package_86_for_KB2769165~31bf3856ad364e35~amd64~~6.2.1.0.2769165-12166_neutral_GDR"
2015-10-18 06:52:43, Info CSI 000004f3 [SR] Verify completeFurther down:Code: [Select]
2015-10-18 07:01:11, Info CSI 0000083b [SR] Verify complete
2015-10-18 07:01:11, Info CSI 0000083c [SR] Repairing 3 components
2015-10-18 07:01:11, Info CSI 0000083d [SR] Beginning Verify and Repair transaction
2015-10-18 07:01:11, Info CSI 0000083e Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.2.9200.16430_none_fdce12188b615b12\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" :
Found: {l:32 b:DlDsw0gnmHvb09gSf4tmlj4x7suVwNkLMYsvUZoCR6U=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}
2015-10-18 07:01:11, Info CSI 0000083f [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.2.9200.16430, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-10-18 07:01:11, Info CSI 00000840 Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.2.9200.16430_none_fdce12188b615b12\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" :
Found: {l:32 b:DlDsw0gnmHvb09gSf4tmlj4x7suVwNkLMYsvUZoCR6U=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}
2015-10-18 07:01:11, Info CSI 00000841 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.2.9200.16430, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-10-18 07:01:11, Info CSI 00000842 [SR] This component was referenced by [l:164{82}]"Package_86_for_KB2769165~31bf3856ad364e35~amd64~~6.2.1.0.2769165-12166_neutral_GDR"
2015-10-18 07:01:12, Info CSI 00000843 Hashes for file member \??\C:\Windows\SysWOW64\api-ms-win-eventing-provider-l1-1-0.dll do not match actual file [l:78{39}]"api-ms-win-eventing-provider-l1-1-0.dll" :
Found: {l:32 b:IcJ1U4cAtM9mt/SKbvZQJu9VtN+OOMqa6NrquayVO6U=} Expected: {l:32 b:rNKnpXpPwgg3J8EtpXTnlYtTAWpPm5CMw+PJiyQqZpc=}
2015-10-18 07:01:12, Info CSI 00000844 [SR] Repairing corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:78{39}]"api-ms-win-eventing-provider-l1-1-0.dll" from store
2015-10-18 07:01:12, Info CSI 00000845 WARNING: File [l:78{39}]"api-ms-win-eventing-provider-l1-1-0.dll" in [l:46{23}]"\??\C:\Windows\SysWOW64" switching ownership
Old: Microsoft-Windows-MinCoreApiNamespace, Version = 6.2.9200.16384, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
New: Microsoft-Windows-UniversalCRT-APIfwd-Win8, Version = 6.2.9200.17488, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2015-10-18 07:01:12, Info CSI 00000846 Hashes for file member \??\C:\Windows\System32\api-ms-win-eventing-provider-l1-1-0.dll do not match actual file [l:78{39}]"api-ms-win-eventing-provider-l1-1-0.dll" :
Found: {l:32 b:ydI7NDZAzD75OkUOG3y3pWkevNiGgNnuw/+Gu2J1tQ8=} Expected: {l:32 b:NtO7746IrcAynhpwUe9AC8ke91eOAKYWV822XvvoRPs=}
2015-10-18 07:01:12, Info CSI 00000847 [SR] Repairing corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:78{39}]"api-ms-win-eventing-provider-l1-1-0.dll" from store
2015-10-18 07:01:12, Info CSI 00000848 WARNING: File [l:78{39}]"api-ms-win-eventing-provider-l1-1-0.dll" in [l:46{23}]"\??\C:\Windows\System32" switching ownership
Old: Microsoft-Windows-MinCoreApiNamespace, Version = 6.2.9200.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
New: Microsoft-Windows-UniversalCRT-APIfwd-Win8, Version = 6.2.9200.17488, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2015-10-18 07:01:12, Info CSI 00000849 [SR] Repair completeThere are a lot of "[DIRSD OWNER WARNING] Directory …" and other "WARNING: File […". Should we worry about them?
—————————— —————————— ——————————
In “Repair Reparse Points”
Is it possible that the "Error: 0 - Access denied" when we run the program the second time might comes from the instruction:
"Setting Owner To System And Everyone Read Access To Denied" ?
Code: [Select]
[x] RemoveDirectoryW Returned An Error, Error: 0 - Access denied.
[x] Even Though We Got An Error, Lets Keep Going.
[x] Type is JUNCTION, Calling: mklink /J "C:\Users\Administrator.Daniel-laptop\AppData\Local\Microsoft\Windows\Temporary Internet Files" "C:\Users\Administrator.Daniel-laptop\AppData\Local\Microsoft\Windows\INetCache"
[x] Setting Owner To System And Everyone Read Access To Denied (This Is The Default) To The Link Folder: C:\Users\Administrator.Daniel-laptop\AppData\Local\Microsoft\Windows\Temporary Internet Files
—————————— —————————— ——————————
Regards, ¿̒ ̡͡ ʅ
Daniel ⌢ ◦ ⌢ ♬
follow me on Facebook
ॐ God bless you ‼ ≈̰ ̃(ړײ ) ̰͠〰 ❤