Tweaking.com Support Forums
Main Forum => General Computer Support => Topic started by: Allen on March 28, 2012, 10:29:36 am
-
Hey, it's me again. I have another computer problem (actually, the same one that I had last time, just not as advanced), and you helped me so well last time, I don't trust asking anyone else for advice.
Anyways, I've somehow once again acquired the System Check virus. Last time, I tried getting rid of it myself, which led me to having to reinstall Windows. My question is, what the best route to take to get rid of this thing? I'm able to launch in safe mode (in it right now), and ran avast!. It found 20 infected files, and after removing them and rebooting, apparently the System Check virus was not one of the infections removed.
There are several sites out there that help one walkthrough the cleaning of this stupid virus, but I don't want to take any steps until I get confirmation that I'm doing the right thing. Any advice?
I appreciate it the help again :smiley: thanks in advance!
-
I'm sure Shane can lead you down a better path, but I would run malwarebytes and see what that comes up with. Hope all goes well
Chris
-
Thanks, I assumed that I would end up using malwarebytes, just wanted to make sure that there were no steps before/during/after using malwarebytes that I need to do in order to safely remove it and restore windows.
Right now, I'm just going to follow the instructions from this site:
http://www.myantispyware.com/2012/01/02/how-to-remove-system-check-virus/
Hopefully it'll work
-
The most important thing after cleaning it up is to make sure your flash and java are up to date.
Check them now, are they out of date? Almost every virus my customers get are from security holes in java or flash that allows a bad advertisement or a bad site to install the virus without the user knowing. Every system I have cleaned has had an outdated java and or flash.
They are plugging these holes and new ones are found. Every infection I have cleaned up have stopped getting on my customers systems after making sure java and flash where up to date. :wink:
Shane
-
Oh and run tdsskiller.exe to check for some rootkits. Avast and malwarebytes dont catch rootkits, they are too deep and hidden.
And is everything working ok or is anything out of the norm? Do a google search for anything, click on one of the results, does it get redirected to a different page? If it does you have a rootkit installed and still infected. :wink:
Shane
-
ditto. I didn't even think about a possible rootkit.
Chris
-
That's funny Shane, because literally 2 minutes before I saw your post, Java popped up and asked me if I'd like to install an update (I said no, since I was busy trying to save my computer lol). I never would have thought that an outdated java or flash would have been the problem, but I will be keeping them updated from now on!
And also funny, I was thinking the only thing noticeably wrong with the computer are the missing desktop files, but RIGHT after I got done reading your second post, a random pop-up occurred (had never happened before). So I'm guessing rootkit.........
-
Yeah if a random advertisement pop up comes from no where you have a rootkit bud :wink:
Shane
-
Ok, so I ran Malwarebytes, removed the infections (8 of them), then rebooted. Ran the tdsskiller and it found nothing. It was really weird before I rebooted man, like, sounds coming from NOWHERE (as if an advertisement/commercial were playing, but nothing was open!). Since rebooting after malwarebytes, nothing.
But my desktop has still not returned to it's original state, nor has the start menu (with all my most used applications and whatnot listed), and nothing on the right of the tab where it normally says "Documents" "Control Panel" and whatnot, the only thing listed there now is "Computer". Is there anyways I can reset these to default?
ALSO, there's still a "System Check" file located on my desktop. Is it safe to delete this file?
Thanks!
-
Delete that shortcut yes.
Also sounds like all your icons have been moved tot he temp folder. As long as you didn't clear your tempt folder it can be fixed.
Grab my Windows repair program. I have a fix for this in there :wink:
My repair moves all the icons back from the temp folder and back to the start menu and desktop. Also you might have some polices to hide the desktop from the virus, my repair tool will remove those as well form one of its repairs.
After words you can then go to the properties of the start menu and restore it to default. :wink:
Shane
-
DONE! Thank you so much Shane! You truly are a rare individual!
I will continue to support you and your work, and will let people know!
-
Glad you got it all working :-)
Shane
-
Here is an example how new holes are found and plugged in java and flash. :wink:
http://www.majorgeeks.com/story.php?id=33973
Shane
-
So what your telling me.....if I'm getting this right, is to keep flash and java up to date!lol
Chris
-
Little bit lol :wink:
Shane
-
Hey, so I'm having virtually the exact same problem that I had when I posted in the support forum and was mentioning windows media server no longer being available. What happened was that the virus removed key windows files, and the computer got to the point where it wouldn't even boot anymore. I'm having the same problem, but with a friends computer now.
After removing the virus(s [very much so plural]) and installing Avast!, I rebooted the computer, and now the computer is stuck on a constant reboot mode, it will reboot, go through the windows screen, and then crash to a blue screen and repeat the process again.
My question is, will I be able to reinstall Windows on this system as I did with my system? This computer has Windows XP instead of Windows 7.....will I still be able to reinstall windows AND save all of the documents already on the system?
Thanks! I really want to get this thing fixed for her.
-
No xp install is very different than Vista and 7.
Are you able to go into safe mode at all?
Shane
-
Can't go into safe mode, can't go into anything :undecided:
-
Then your going to have to do a fresh reinstall. :sad:
But first you need to get her data off.
So you will need 2 things.
1. You will need a big enough thumb drive or external hard drive.
2. You need the Ubuntu setup cd. http://www.ubuntu.com/download/desktop
You will burn the Ubuntu iso to a cd. Once done you will be able to boot off this cd and run Ubuntu right off of the cd.
Once in Ubuntu you will have access to her drive. Plug in the external or thumb drive and start copying her data of her drive and on to the external :wink:
Once you have her data do a fresh reinstall of Windows xp. :cheesy:
Shane
-
So,theoretically (if I don't screw something up....) I SHOULD be able to save all of her data/files? This is really what I'm most worried about, because stupid me made the decision to tell her beforehand that I'd be able to save all of her files, lol. Rookie mistake.
Btw, once again, thanks Shane. You're a rare breed of selfless person, and it's always a pleasure conferring with you.
-
You will be able to backup her personal files, music, pics docs. But not the programs.
Just backup her whole profile and you should be good :wink:
Shane
-
Hey, so I had to take the past week off from trying to fix her comp because of a wicked cold that spread through the family. None the less, I tried again today, and ran into an unexpected error.
Upon entering the Windows XP disc and trying to reinstall windows, it runs through a few configurations and then a screen with the following information is displayed:
"Setup did not find any hard disk drives installed in your computer.
Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.
Setup cannot continue. To quit Setup, press F3."
This error message exceeds the limit of my knowledge. I'm not sure at all where to go from here.....does this even sound like a fixable problem?
Once again, thanks in advance for your time Shane :artist:
-
What computer does she have?
Windows setup needs the driver for the hard drive controller.
If it is a store bought machine you might be able to change the sata controller off of ahci and put it to IDE mode instead (This is in the BIOS). Then Windows setup will see the drive.
Other wise you are going to need a floppy disk to give XP the drivers during setup. And if she doesn't have a floppy drive you can use a USB floppy drive. :wink:
Of course if you don't have those I will teach you a trick on adding drivers to the XP install itself and making a new setup cd :cheesy:
Shane
-
Thank you so much Shane. I mean, this computer is really not even worth fixing (I found some on eBay for $60.....), but I have to try.
It's a Gateway TA6, no floppy drive. I searched the BIOS for anything related to sata controller, ahci, and IDE, but found nothing.
-
Yeah you need the sata driver
http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=3057
So since you dont have a floppy you will need a dvd burner.
You are going to slipstream the drivers right into the setup :-)
To do that it will be easy, you will use a program called nlite
http://www.nliteos.com/
And you will add thise driver pack to nlite
http://driverpacks.net/driverpacks/windows/xp/x86/mass-storage/12.03
Then follow the instructions and you will be set :wink:
Shane
-
Do I download the SATA AHCI Driver, or the SATA Computer Intel SATA Support Driver? And I will be slipstreaming both the SATA driver and the other driver pack to the windows XP .ISO file I have via Nlite?
Thanks :-D
-
Just do the driver pack and nlite. :wink:
The driver pack should already have the driver you need and then some.
Once you have the system reinstalled you will need that gateway download page to get the drivers for the rest of the system :-)
All of my install disks are slip streamed. I do a LOT of reinstalls for customers. It is such amazing time saver not having to hunt down drivers for the install.
Shane
-
Oh and to make life a little easier add the LAN and wireless driver packs
Lan
http://driverpacks.net/driverpacks/windows/7/x86/lan/12.04
Wireless
http://driverpacks.net/driverpacks/windows/7/x86/wlan/12.03
This way when it is reinstalled the network will work and have internet access right from the start.
Better than getting the drivers on another system and getting them copied over.
Just another time saver :-)
Shane
-
Sorry for sounding so ignorant, I just want to make sure that I do everything correctly.
I extracted the mass storage driver pack. In nLite, on the "Import Presets" page, I imported the mass storage .ini that was extracted (was this correct?), and on the following page there are several options, one being to "Integrate Drivers". Do I need to mess with that, or just "Create Bootable ISO"?
Thanks!
-
Yes do the Integrate Drivers :wink:
That will add them to the dos setup of windows :-)
Taking the family to see avengers, be back soon.
Shane
-
Hey, so I removed what I had imported on the "Import Presets" page, and continued to the "Integrate Drivers" screen. I then chose all of the drivers that you had recommended I download (except I found the XP WLAN and LAN downloads instead of using the Windows 7 ones you posted :-P). Upon selecting all the drivers (probably around 100 of them), the program continued to ask me very technical questions about the computer I would be installing the OS on, and I simply did not know the answers as they are way beyond my computer knowledge. So, I just pushed cancel, had to do this several as every time I'd press cancel, a new screen would pop up asking another very technical question. Had to push cancel probably 20 times. I then proceeded to create the .ISO file, burnt the new file, and tried on the computer. Still running into the same problem. I'm sure I probably did something/everything wrong lol
Hope y'all enjoy the movie!
-
Great movie :-)
I haven't ran nlite in a while. I forgot that you will only use it last, to remake the ISO.
Copy the xp cd to a folder. Then follow this to add the driver packs.
http://driverpacks.net/docs/beginners-guide-windows-xp
The DriverPacks BASE is the program to get the drivers added correctly :wink:
That guide will alos give you steps from start to finish if you like as well.
Shane
-
Once again, Shane, you have proven yourself to be a King among men! I got it fixed! Thank you so much for your time and consideration!
Honestly, I was JUST about to give up on this one. Thankfully it worked out!
Till we meet again! :-D
-
Glad you got it working :-)
Since your all set I will lock this thread :wink:
And as always...
If your happy with my work. Then all I ask in return is you simply let others know about my site and programs. I help with anything computer or network related :-)
Also always feel free to make a post in the feedback forum.
And a facebook like at the top of the page of my site is nice as well. ;)
Shane