Tweaking.com Support Forums
Main Forum => General Computer Support => Topic started by: Hoe on June 06, 2016, 10:29:17 pm
-
After run windows repair v3.9.1, stuck in windows Auto repair loop.
- can't load safe mode.
- tried every option in the boot options menu and cannot get Windows 8 to boot. I just get 'Automatic Repair couldn't repair your PC." And later: "Log file: D:\Windows\System32\Logfiles\Srt\SrtTrail.txt" with the Shut down and Advanced options button, which just takes me to the boot options screen.
Startup Repair diagnosis and repair log
---------------------------
Last successful boot time: 6/6/2016 2:42:24 PM (GMT)
Number of repair attempts: 8
Session details
---------------------------
System Disk = \Device\Harddisk0
Windows directory = E:\Windows
AutoChk Run = 0
Number of root causes = 1
Test Performed:
---------------------------
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 62 ms
Test Performed:
---------------------------
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 32 ms
Test Performed:
---------------------------
Name: Target OS test
Result: Completed successfully. Error code = 0x0
Time taken = 78 ms
Test Performed:
---------------------------
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Boot manager diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Event log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 47 ms
Test Performed:
---------------------------
Name: Internal state check
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Root cause found:
---------------------------
Startup Repair has tried several times but still cannot determine the cause of the problem. :thinking:
---------------------------
---------------------------
-
When the Startup Repair fails, does it give you the option to try other repair methods ?
This may take you to the Recovery Environment to try the restore points.
Sometimes a cold boot can work, but not always.
This is done by removing all power sources then hold the power button in for ~30 secs then plug the AC in to see if it will start normally.
This next one can work on some Win 7 laptops but not sure about Win 8/8.1 machines.
Start tapping the spacebar at the rate of 1/sec then hit the power button while continuing to tap the spacebar.
This can get you into the advanced boot options where you could use Safe Mode to restart Windows Repair to use the registry restore option.
Also in the advanced boot options is one to stop the auto repair loop but this will probably just produce a BSOD with a Stop Error code.
-
I've got this issue too.
I tried a cold boot and I can't boot into Safe Mode either.
Can anyone help please?
-
I've got this issue too.
I tried a cold boot and I can't boot into Safe Mode either.
Can anyone help please?
It's best if you open your own thread with details of your OS and how your problem came about.