Tweaking.com Support Forums

Main Forum => Tweaking.com Support & Help => Topic started by: jammanne on July 20, 2022, 09:11:58 pm

Title: Diagnose connection.
Post by: jammanne on July 20, 2022, 09:11:58 pm

Hi,
The diagnostic function no longer works in network center and sharing
if someone has already had this mistake and managed to fix it
Thanks .
can be poster in the general section

Title: Re: Diagnose connection.
Post by: Boggin on July 21, 2022, 01:52:56 am

You haven't said which version of Windows you are using so I will assume Win 10 or 11.

Open a Command Prompt (Admin) or Powershell (Admin) and enter these cmds -

dism /online /cleanup-image /restorehealth

sfc /scannow

netsh int ip reset

shutdown /r /t 00

Check to see if you have any connectivity issues after the reboot and let me know if the sfc /scannow reports it is unable to repair all files and which version of Windows you are using.

Title: Re: Diagnose connection.
Post by: jammanne on July 21, 2022, 02:10:05 am

Hello
Windows 10
I would tell you more at the end of the scan

Title: Re: Diagnose connection.
Post by: Boggin on July 21, 2022, 02:33:05 am

If you get any error on running the netsh reset cmd - open a Powershell (Admin) and enter these cmds -

netsh winsock reset

ipconfig /release

ipconfig /renew

ipconfig /flushdns

ipconfig /registerdns

shutdown /r /t 00

Title: Re: Diagnose connection.
Post by: jammanne on July 21, 2022, 03:25:02 am

after restart the connection was turned off for scanning all is ok
now windows works normally it's just that I had never seen this error and that I can't fix it.

Title: Re: Diagnose connection.
Post by: Boggin on July 21, 2022, 03:37:52 am

Well we got there :)

Title: Re: Diagnose connection.
Post by: jammanne on July 21, 2022, 05:01:41 am

the error is always present only Windows works normally.
I did a Windows update with its ISO and the error is still present.

Title: Re: Diagnose connection.
Post by: Boggin on July 22, 2022, 02:52:32 am

Can you check if the Diagnostics Policy service is running.

Go Start - type services.msc and press enter.

It should be showing as Automatic and Running.

If it is running then go Start - type troubleshooting and press enter.

From there you can click on other troubleshooters and select Internet Connections to see if it runs.

Title: Re: Diagnose connection.
Post by: jammanne on July 23, 2022, 05:33:28 am

Finally I formatted and install Windows 11 the case is fixed so, it was minor as dysfunctional but impossible to fix the error, I had checked the services at diagnostic level and also found a link with the same error
Thank you for your help.

Title: Re: Diagnose connection.
Post by: Boggin on July 24, 2022, 01:27:45 am

I was going to ask if you got the same connectivity problem in Safe Mode with Networking, but glad you were able to resolve even though you had to use the "nuclear" option.

Title: Re: Diagnose connection.
Post by: jammanne on July 25, 2022, 07:34:16 am

I didn't think about it