Messages

1

Feedback & Suggestions / tweaking.com 36 tested today

« on: October 07, 2015, 10:57:02 am »

  the new tweaking.com windows repair 36 is faster - thanks

  i keep getting the same exact 'tweaking.com manage ACL needs to close' message

  on close to 50% of the repairs and then HAVE to manually over-ride the 'send/donot send to microsoft'

  box in order for any of those repairs to COMPLETE

  the only clues i can offer is that NONE of this 'tweaking.com Manage ACL needs to close'

  was EVER even an issue before the series repair 35

  i've changed none of the settings on either of my HP Pavilion N5425 TWIN notebooks

  they both run GREAT and again i've altered none of the settings that i'm aware of to

  trigger this error message that appears on close to 50% of the repairs

  otherwise - yes the program now runs faster

  if this nasty 'Manage ACL needs to close' error window could be ELIMINATED

  it would be your best program yet

  for some reason the tweaking.com ACL management system fails to interact with my

  otherwize PERFECTLY functioning windows XP sp3 operating system

  wish i knew how to give you the formation you would require to solve the mystery

  otherwize a 100% thumbs up from me

   at the very worst - at least i'm past the cry-baby name-calling stage when this

   problem 1st appeared.

2

General Computer Support / Re: 3.5.0. produces result: 'ManageACL_32.exe has encountered a problem and needs...

« on: September 18, 2015, 10:36:02 pm »

thanks for the chill words of support to all

i did that install of 3.5.1. as soon as i sqw it become available

the error box that says '...  ManageACL_32.exe has encountered a problem and needs to close ...'

still appears on approx 50% of the repairs BUT:  with the new 3.5.1. repairs program

i am at least able to manually close the error box

i've done the check disc program repeatedly and continue to do so


next time i have time to run the 3.5.1. or beyond and this stuff happens i'll try to

do what you were asking with the EVENT BOX

and post it here or in a new thread

thank you for the smile face

i'll try to run the program again over the weekend and

post the 1st error message from the event box as you've suggested


i do have a VERY old machine that is continually being updated by microsoft

the machine is HP Pavilion N5425

I've got XP home with service pack 3 &  with all the updates that microsoft will allow currently and

will continue until 2019 as it's been reported they will allow


finally, sorry i communicated poorly -- i'm like the 'world's angriest guitar player' on youtube

when i'm running a program that has worked in the past and then doesn't work all of a sudden

it's just me being an adult infant - i apologize for losing my patience on-line

when i get things more settled - i plan on contributing via paypal to your site

i actually am sincere - sorry for the troubles up to now

--jeff

3

General Computer Support / Re: 3.5.0. produces result: 'ManageACL_32.exe has encountered a problem and needs...

« on: September 18, 2015, 07:08:33 am »

  sorry i don't know how to give you all those results right this second (i'll need beginner's assist)


   i think your communication is really superb/professional


  i'm down with the quid-pro-quo 'no-insult zone' that you've recommended

  i can also be willing to give you the results as you've suggested

  let's take them one at a time please

  #1) you suggest i go to the 'program folders into the logs'

 
      okay i'm willing to don this for the benefit of everybody who may have discovered

      that they are getting this error message starting with 3.5.0. and even beyond


    where do i look for this program folder on my computer and how do i upload each file log ?


    i was computer-traumatized by the events of last weekend (boo hoo - too bad right)

   i did notice that with 3.5.1.  i CAN get through the 'reset file permissions ( in repair #3)' by hitting the

   'do not send' (to microsoft) and then the repair #3 reset file permissions can proceed

    all of the repairs (over 50% of them) that produce the error message can now

    MANUALLY be over-ridden (no more 'walk-away-from-computer while repairs proceed)


   the error message appears in well over 50% of the repairs but not all of them

   i can get through the repairs by selecting the 'do not send' (to microsoft) tab every time the

   error message appears


   i AM willing to come back to the table if you will instruct me step-by-step HOW to give you the

   logs ....   consider me as an illiterate windows guy


   again, the reason i'm willing to come back to the repairs table is for the benefit of other

  users who may also have experienced this post 3.5.0. meltdown on their laptops

   of course it is NOT all-about-me -- i know that and am a believer in sharing and working through this



    so step by step, as though you were instructing a beginner

   how do i:

1) access the programs folder (where is it, etc

2) get into the 'logs'

3) find the thread

4) upload

5) where is the event viewer


also - how do i upload a picture ?




   

4

General Computer Support / Re: 3.5.0. produces result: 'ManageACL_32.exe has encountered a problem and needs...

« on: September 15, 2015, 06:21:21 am »

  there is no 'dicking off'' just a great program that no longer works

  it produces a result that no longer works

  the fact that you don't allow roll-backs to previous versions is the real

   dicking off  --  this isn't about your work or your ego trip

   it's about you changing your program and leaving people who used it in

  the rubbish bin

  you and your ego seem to think that's where us little people belong

   i don't know what '..   ManageACL_32.exe ...' is and i don't give a frickin' frack either

   ALL I KNOW is that i've been using ALL of the twerking.com programs for over 3 years

  without ANY incident until NOW with this new/improved 3.5.0. and it produces

   error screen after error screen

  ANYBODY and any numb-nut can go out and buy a new computer with

   windows 10 on it and be a 'genius' -- ANYBODY can do that

   YOUR program originally started with the promise of helping the

  poor little folk who are stuck in the WINDOWS XP ERA

   otherwize why not just REMOVE the promise of windows XP fix-up

  the thing that kills me is that

   it's all about 'your work'

well - what about OUR work or MY work or HIS work

  #1 complaint:  allow previous versions like the fantastic  3.4.3. to be available

   you've turned into apple/macintosh where anything 'old' is obsolete

  that was the promise of windows operating systems and YOU'VE turned your back on that

by not allowing your older restore programs to be accessed

have a great week mr ego trip

5

General Computer Support / Re: 3.5.0. produces result: 'ManageACL_32.exe has encountered a problem and needs...

« on: September 14, 2015, 06:04:47 pm »

   okay it's called 'reset service permissions' -- hello it DOES NOT WORK with

  XP vs 3.5.0.

  how do i know ?

  i've been updating my twerking.com program for over THREE YEARS

  It does not take 35+ minutes in safe/w/networking to reset service permissions

  it just does NOT

6

General Computer Support / Re: 3.5.0. produces result: 'ManageACL_32.exe has encountered a problem and needs...

« on: September 14, 2015, 04:12:58 pm »

if you (unfortunately) WERE me and you had waited 35 minutes on step #4 which

is 'reset permissions' then YOU would know something was seriously WRONG

with this new 3.5.0.  -- that -- is why i stopped the program

i've run 'check disc' and all that other good stuff

i've used the program in safe mode with networking, etc

i've been running ALL of the tweaking.com com programs for almost 3 years now

i KNOW how LONG they take to run

sometimes even less than 30 minutes

there is a HUGE FLAW with the way 3.5.0. runs on XP

7

General Computer Support / Re: 3.5.0. produces result: 'ManageACL_32.exe has encountered a problem and needs...

« on: September 14, 2015, 04:05:29 pm »

Tweaking.com - Windows Repair v3.5.0
--------------------------------------------------------------------------------

System Variables
--------------------------------------------------------------------------------
OS: Microsoft Windows XP
OS Architecture: 32-bit
OS Version: 5.1.2600
OS Service Pack: Service Pack 3
Computer Name: LYNNPOKEMONOJEF
Windows Drive: C:\
Windows Path: C:\WINDOWS
Program Files: C:\Program Files
Current Profile: C:\Documents and Settings\LYNNPOKEMONOJEFF
Current Profile SID: S-1-5-21-1085031214-1677128483-1708537768-1004
Current Profile Classes: S-1-5-21-1085031214-1677128483-1708537768-1004_Classes
Profiles Location: C:\Documents and Settings
Profiles Location 2: C:\WINDOWS\ServiceProfiles
Local Settings AppData: C:\Documents and Settings\LYNNPOKEMONOJEFF\Local Settings\Application Data
--------------------------------------------------------------------------------

System Information
--------------------------------------------------------------------------------
System Up Time: 0 Days 00:03:01

Process Count: 15
Commit Total: 149.09 MB
Commit Limit: 1.28 GB
Commit Peak: 169.21 MB
Handle Count: 3187
Kernel Total: 20.24 MB
Kernel Paged: 15.74 MB
Kernel Non Paged: 4.50 MB
System Cache: 199.61 MB
Thread Count: 209
--------------------------------------------------------------------------------

Memory Before Cleaning with CleanMem
--------------------------------------------------------------------------------
Memory Total: 1,023.48 MB
Memory Used: 256.58 MB(25.0691%)
Memory Avail.: 766.91 MB
--------------------------------------------------------------------------------

Cleaning Memory Before Starting Repairs...

Memory After Cleaning with CleanMem
--------------------------------------------------------------------------------
Memory Total: 1,023.48 MB
Memory Used: 182.00 MB(17.7824%)
Memory Avail.: 841.48 MB
--------------------------------------------------------------------------------

Starting Repairs...
   Started at (9/14/2015 2:17:33 PM)

Setting Any Missing 'InstallDate' From Uninstall Sections Before Running Repair...
Total Missing 'InstallDate' Fixed: 2
 
01 - Reset Registry Permissions 01/03
   HKEY_CURRENT_USER & Sub Keys
   Start (9/14/2015 2:17:41 PM)

   Running Repair Under Current User Account
   Done (9/14/2015 2:17:50 PM)

01 - Reset Registry Permissions 02/03
   HKEY_LOCAL_MACHINE & Sub Keys
   Start (9/14/2015 2:17:50 PM)

   Running Repair Under System Account
   Done (9/14/2015 2:17:53 PM)

02 - Reset File Permissions: E:
   E: & Sub Folders
   Start (9/14/2015 2:17:53 PM)

   Running Repair Under Current User Account
   Done (9/14/2015 2:17:58 PM)

02 - Reset File Permissions: C:
   C: & Sub Folders
   Start (9/14/2015 2:17:58 PM)

   Running Repair Under Current User Account
   Done (9/14/2015 2:18:02 PM)

02 - Reset File Permissions: All Profiles
   C:\Documents and Settings & Sub Folders
   Start (9/14/2015 2:18:02 PM)

   Running Repair Under Current User Account
   Done (9/14/2015 2:18:05 PM)

02 - Reset File Permissions: Current Profile
   C:\Documents and Settings\LYNNPOKEMONOJEFF & Sub Folders
   Start (9/14/2015 2:18:05 PM)

   Running Repair Under Current User Account
   Done (9/14/2015 2:18:07 PM)

03 - Reset Service Permissions
   Start (9/14/2015 2:18:07 PM)

   Running Repair Under Current User Account

Repairs stopped. The current repair, if running, will still go until finished.

   Running Repair Under System Account
   Done (9/14/2015 2:52:02 PM)

Repairs Stopped By User.
   Done at (9/14/2015 2:52:02 PM)
   Total Repair Time: 00:34:32

8

General Computer Support / Re: 3.5.0. produces result: 'ManageACL_32.exe has encountered a problem and needs...

« on: September 14, 2015, 03:21:19 pm »

regarding this:

'....  Hmmmm do you have the log files and can you post them for me on this thread also if you can look in the event viewer and post the event log that went with the crash this would be some huge help into finding your issues with the Windows repair 3.5.0 ....''

okay i'm WILLING to TRY but:

1) how do i access and then send to you the 'log files'

2) how do i look in the 'event viewer' and then post the 'event log'

there was never any CRASH just the frickin' first-time-ever ERROR CODE that says:

'ManageACL_32.exe has encountered a problem and needs to close'

'.... 

9

General Computer Support / Re: 3.5.0. produces result: 'ManageACL_32.exe has encountered a problem and needs...

« on: September 14, 2015, 03:15:06 pm »

'ManageACL_32.exe has encountered a problem and needs to close'

it will NOT advance - even if i click on 'do not send' a thousand times

it will NOT repair the reset permissions

this is the VERY FIRST INSTANCE of ANY tweaking.com all the way up to

3.4.3 that would not actually do the repair

the 'shane' guy goes to great lengths to tell the whole world

how he has now 'repaired all the reset permissions bugs' but in fact

has RUINED the program

i did manage to do do all the other repairs in 3.5.0.

sending you what 'logs' ?

do i have a facility to send you my 'logs' ?

SHANE needs to FIX the bugs HE invented on 3.5.0. --PERIOD--

for now -

i'm going to see if i accidentally STORED any of the ancient tweaking.com series on a memory stick

3.5.0. is a DISASTER - it claims to work with XP but it only produces this result:

'.... ManageACL_32.exe has encountered a problem and needs to close ....'

10

General Computer Support / 3.5.0. produces result: 'ManageACL_32.exe has encountered a problem and needs...

« on: September 14, 2015, 12:33:51 pm »

VERY dissappointed - huge hours WASTED trying to update/repair using

'new + improved 3.5.0.' because of constant

'improvements' that don't work or do anything - yes it's FREE but time wasted

now i can't revert back to 3.4.3 - DISASTER

my xp service pack 3 and your new + improved 3.5.0. are --NOT-- --COMPATIBLE--

it will not get past 'reset permissions'

my computer cannot withstand this punishment of trying to

run repairs for 35+ minutes AND only get to step #4 (repair permissions)

grade = F-   (FAIL)

i'm un-installing tweaking.com repairs untill you FIX this

you claim that 3.5.0. 'fixes' bugs and glitches to repair permissions

yet it does THE OPPOSITE