Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - olgun52

Pages: [1]
1
Hi Boggin,

The user has not yet returned. I guess he won't come back. I am sorry.
If he returns, I will  consider what your wrote.

Thank you for your help.

Best regards.

2
Hi Boggin,

My apologies for the delay.

We opened the system with Windows 8.1 repair media. The user said everything is fine. However, he has not returned until now.
So I'm late. Sorry.

If he returns, I will consider your suggestions.

Thank you so much. Best regards.

3
Hi Boggin,

We used to work with repair media on Flash drive. We can enter normal and safe mode.
Disk problems continue.

Thank you again for your help.

Regards.

4
Given the amount of corruption the read-only chkdsk found, I think you should run the chkdsk /r first.

With that amount of corruption, your HDD could be failing.

Have you created a system image yet ?

Do that first before performing a chkdsk /r

This is how to create the Win 8.1 install media - https://www.dell.com/support/article/en-uk/sln299314/how-to-create-windows-installation-media-for-windows-8-1-and-windows-10-using-the-media-creation-tool?lang=en

Hi Boggin.
Thank you for taking the time to help me with this and i'm very grateful.


Quote
C:\Windows\tweaking.com-regbackup-SAMET-Windows-8.1-Pro-(64-bit).dat

FCheck: C:\Windows\System32\energyprov.dll [2014-11-21] <==== ATTENTION (zero byte File/Folder)
FCheck: C:\Windows\System32\energytask.dll [2014-11-21] <==== ATTENTION (zero byte File/Folder)
FCheck: C:\Windows\System32\es.dll [2014-11-21] <==== ATTENTION (zero byte File/Folder)

C:\found.000
C:\found.001
C:\found.002
C:\found.003
C:\found.004
C:\found.005
C:\found.006
C:\found.007

==================== Services (All) ===================

(If an entry is included in the fixlist, it will be removed from the registry. The file will not be moved unless listed separately.)

===================== Drivers (All) ===================

(If an entry is included in the fixlist, it will be removed from the registry. The file will not be moved unless listed separately.)

==================== NetSvcs (Whitelisted) ===================

(If an entry is included in the fixlist, it will be removed from the registry. The file will not be moved unless listed separately.)


System errors:
=============
Error: (05/14/2020 02:56:42 AM) (Source: disk) (EventID: 7) (User: )
Description: \Device\Harddisk0\DR0 aygıtında bozuk bir blok oluştu.

C:\Windows\WinSxS\amd64_microsoft-windows-e..ficiencywizard-task_31bf3856ad364e35_6.3.9600.17415_none_6afbeb04e26bc9ee\energytask.dll
[2014-11-21 01:35][2014-11-21 01:35] 000000000 _____ () D41D8CD98F00B204E9800998ECF8427E
C:\Windows\WinSxS\amd64_microsoft-windows-c..complus-eventsystem_31bf3856ad364e35_6.3.9600.17415_none_fdf89a04257b1325\es.dll
[2014-11-21 01:35][2014-11-21 01:35] 000000000 _____ () D41D8CD98F00B204E9800998ECF8427E
C:\Windows\SysWOW64\es.dll
[2014-11-21 01:36][2014-11-21 01:36] 000367616 _____ (Microsoft Corporation) CB43D4396475652528112B2CC3739FAB
C:\Windows\System32\energytask.dll
[2014-11-21 01:35][2014-11-21 01:35] 000000000 _____ () D41D8CD98F00B204E9800998ECF8427E
C:\Windows\System32\es.dll
[2014-11-21 01:35][2014-11-21 01:35] 000000000 _____ () D41D8CD98F00B204E9800998ECF8427E


We were unable to run Tweaking Windows Repair Tool.The software did not go into safe mode.We tried running it in safe mode and again it failed.The system does not boot in safe mode now.We can only work at the Command prompt.

We received a farbar log from the command prompt. Listed some corrupt files. We found the files, but we couldn't copy them because they are zero bytes. We had the Tweaking Windows Repair Tool backup file. We want to backup from this file. I first asked the user to create Win 8.1 install media.

Which should be our operation priority? 8.1 upload media or  tweaking.com-regbackup file?

Even if the regbackup file works, I think only safe mode can be turned on.

Best regards.


5
Thanks - What did the chkdsk /r report ?

Sorry. Currently, normal and safe mode cannot be opened on the computer.

Command prompt can be opened
I will run the Farbar software from the command prompt.
I'll get the farbar logs first.

Then I think chkdsk / r with Farbar recovery scan tool.

Best regards

6
You haven't said which version of Windows you are using.

I'm sorry.
Platform: Windows 8.1 Pro (Update) (X64) Language: Türkçe (Türkiye)

Regards.

7
Ok. Thank you so much.

Regards.

8
Hello

I understood what you mean. Thank you for your prompt reply. I will run it as you have taught me.I'll come back and write again.

Have a nice day. Greetings.

Best  regards.

9
Tweaking.com Programs & Site Help & Support / The software hangs !
« on: May 14, 2020, 03:28:57 PM »
Hello,

I'm trying to work as an assistant here. We have a problem. I would be very happy if you help. The software does not enter safe mode and hangs.When we run in safe mode; again after a while 10% hangs.

https://forum.donanimhaber.com//mesaj/yonlen/143448122

I ran SFC.exe. Was successful.
I ran the following commands with the Farbar recovery scan Tool.

https://forum.donanimhaber.com//mesaj/yonlen/143448122

cmd: sfc /scannow
cmd: DISM.exe /Online /Cleanup-image /Restorehealth
CMD: ECHO Y|CHKDSK C: /F


Checkhd.txt
https://filebin.net/8u3wsql9l1lgi66v

We get the error below;

WARNING!  F parameter not specified. Running CHKDSK in read-only mode.
Errors found.  CHKDSK cannot continue in read-only mode.

-----------

CMD: ECHO Y|CHKDSK C: /R

We get the error below, when I enter this command.

https://filebin.net/ijoyrxmdl61ytpdr/Ekran_Al_nt_s_.PNG?t=n8sil12w

Could you have a suggestion for a solution. Thank you very much.


10
Computer Help / Re: Can't start Settings and Store
« on: February 22, 2017, 01:11:38 PM »
I understand. Thank you for reporting and a lot for your time ! Thread is now close.

Regards.
Yılmaz

11
Computer Help / Re: Can't start Settings and Store
« on: February 21, 2017, 11:08:36 AM »
https://www.bleepingcomputer.com/forums/t/638435/hao123com-has-highjacked-firefox-homepage/?p=4185068

You could direct the OP to this thread which would save you from typing everything out, but I noticed from the last comments by the OP that he's also considering a repair install.

Probably best to go straight for the repair install.
OP message:
Quote
Thanks for that link but I have decided to do a fresh install.
I truly appreciate your assistance.

Best regards
Yılmaz

12
Computer Help / Re: Can't start Settings and Store
« on: February 21, 2017, 09:08:24 AM »
OK.Our problem, can't start Settings and Store

13
Computer Help / Re: Can't start Settings and Store
« on: February 21, 2017, 08:48:52 AM »
Great!. Let's try all your suggestions. We need some time.I will inform you.
Thank you so much.

Regards.

14
Computer Help / Re: Can't start Settings and Store
« on: February 20, 2017, 09:25:05 AM »
Thank you for the answer. We did all the things you said.
Please:
https://www.bleepingcomputer.com/forums/t/638435/hao123com-has-highjacked-firefox-homepage/?p=4169170
(FRST Fixlist+Adwcleaner+Junckware removal tool+MBAM+RogueKiller+EsetOnline scanner)
I know. Infection cleared.
Thanks

15
Computer Help / Can't start Settings and Store
« on: February 20, 2017, 08:39:19 AM »
Here you are:https://www.bleepingcomputer.com/forums/t/638435/hao123com-has-highjacked-firefox-homepage/page-5

I'm trying to help here about a topic.https://www.bleepingcomputer.com/forums/t/638435/hao123com-has-highjacked-firefox-homepage/?p=4184204
Can't start Settings and Store. I used Tweaking Windows Repair (All in One) in normal and safe mode. But it did not solve the problem.Thanks for any ideas.

Pages: [1]