Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Julian

Pages: [1] 2 3 ... 42
open start menu type in folder options  click search tab make sure it looks like this

if it does here is a link to reset windows search...

General Computer Support / Re: System Restore or Registry Backup Restore?
« on: February 07, 2022, 08:38:24 am »
Thanks Boggin! I figured that but could you tell me what is the purpose of doing a backup of the reg, if it's better to use Restore point?
It's all in the WR I know and I am assuming that all programs have a purpose, so just wondering.

 Also, the Reparse Points and Enviornment Variables states that this step is not a fix (Pre-scan) and can be skipped??? I think it is important and I run it every once in a while just to make sure everything is there where it should be.

I also believe you should add two other programs to WR:

Using Command Prompt (Adm) :
DISM.exe /Online /Cleanup-Image /CheckHealth
DISM.exe /Online /Cleanup-image /ScanHealth
DISM.exe /Online /Cleanup-Image /RestoreHealth
Dism.exe /Online /Cleanup-Image /AnalyzeComponentStore
Dism.exe /online /Cleanup-Image /StartComponentCleanup

Using DISM is important too to insure the PC is running tip-top.

It should be in the repairs i believe number 28
Repair Windows 8/10 Component Store

The following commands are done.

Dism /Online /Cleanup-Image /StartComponentCleanup
Dism /Online /Cleanup-Image /RestoreHealth

The first command cleans up the component store (WinSxS Folder) in windows, reducing it size and removing old entries.

The 2nd command is used to repair corrupt files and corrupt entries in the component store.

Reasons for this repair:
Used to fix Windows component store corruption when a SFC /SCANNOW command is unable to repair corrupted system files because the store (source) is corrupted, then run the SFC command again.
Used to fix Windows component store corruption when the same Windows Updates continue to appear to be available to install even though they already show successfully installed in update history.

More information on these commands can be found here:

Feedback & Suggestions / Re: Thanks to Julian (I think) ...
« on: September 07, 2021, 11:24:52 pm »
Hey Art, I took a hiatus how goes it? I?m sorry I did not view my inbox with the pm you sent about finding your key code I hope you found the recover key button on the website?if you clicked that and put in your email it would have sent you the key via email.,1.html

Side note: Shane is the programmer not me..I think he literally converts caffeine into code. I?m just an IT guy self taught that loves powershell.

General Computer Support / Re: DelayedDesktopSwitchTimeout
« on: August 08, 2020, 08:47:51 pm »
I've personally never messed with those registry value's.. on the other hand...

here is how windows boot's up as stated "verbatim" this article below
Code: [Select]
1. HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\BootExecute. This can include instructions to schedule the running of chkdsk but not user programs.

2. Services start next, followed by the RunServicesOnce and RunServices registry keys (if present)

3. User then logs on to the system

4. HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\UserInit. This points to the program C:\WINDOWS\system32\userinit.exe and the entry ends with a comma. Other programs can be started from this key by appending them and separating them with a comma.

5. HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Shell. This should contain just one entry, explorer.exe.

6. Program entries in these 2 registry keys for ALL USERS start next:

HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run and \RunOnce

7. Program entries in these 2 registry keys for CURRENT USER start next:

HKCU\Software\Microsoft\Windows\CurrentVersion\Run and \RunOnce

8. Programs in the Startup Folders of All Users and Current U
I recommend trying to... this as a scheduled task.
2.make sure other programs are not starting up that is slowing this program down.
3.increase the hardware of this machine to start this application.

General Computer Support / Re: pingsender "Alert"
« on: September 07, 2017, 09:39:44 pm »
alternative to firefox i like to use is comodo's ice dragon and a alternative to chrome i like to use is comodo's  comodo dragon browser and if you want extra security to that i run it sandboxed with comodos internet security free version but that is me Lol i have a computer that way over powered compared to the normal average computers that this is really light weight to me.

you can also find in advanced power options usb selective suspend setting.

7 Support & Help / Re: Repair Report [SOLVED]
« on: September 07, 2017, 08:27:15 pm »
sounds good  :smiley:
I went ahead and locked it for you in the future if you ever need to lock your post just modify the first post and tick lock this topic.

8 Support & Help / Re: TweakingRegistryBackup GUI not showing
« on: September 07, 2017, 08:25:31 pm »
just double checking to make sure it is clarified, that it is not do to running with a silent Parameter. :smiley:
side note just looked i put argument in my last post man that is totally something different  :artist:

9 Support & Help / Re: windows upate
« on: September 07, 2017, 04:39:07 pm »
run the windows repair tool select option 16 repair windows updates no need to reboot then try running the command that boggin gave you again thank you for that error code hopefully this is a quick fix.

10 Support & Help / Re: TweakingRegistryBackup GUI not showing
« on: September 07, 2017, 04:23:18 pm »
now do you have an icon on your desktop ex:a shortcut?
does it have this argument on it. /silent our /supersilent
the reason i ask is because it will consider that as an autoback up and cancel the back up because you have it set for

General Computer Support / Re: Network Problem
« on: September 07, 2017, 04:05:04 pm »
woah that is a server configuration issue. what kind of server are you running?
is it a linux server? if so i can help i do run linux servers samba rtmp etc.

12 Support & Help / Re: Repair Report
« on: September 06, 2017, 11:51:30 pm »
click settings> click log location>Click open log

General Computer Support / Re: pingsender "Alert"
« on: September 06, 2017, 11:20:12 pm »
LOL rick are you talking about Mozilla's telemetry?

14 Support & Help / Re: Repair Report
« on: September 06, 2017, 11:16:58 pm »
which version of windows repair are you using? the main screen should look like this on the main page. look at the bottom right you should see the safemode button as well.

General Computer Support / Re: Network Problem
« on: September 06, 2017, 11:00:38 pm »
let me make sure i have this correct before i proceed with an answer. do you want to pull files off your laptop or your server? which one is having the issue with the shared folders?

16 Support & Help / Re: windows upate
« on: September 06, 2017, 12:26:10 am »
it all depends on what is causing that error to be honest. what i would do is try to run the program and all the steps 98% of the repairs are registry related. so you can easily restore the registry and it will be as if the WrAio never ran.
Now with that said do you get this error when you run windows store and try to update apps?

General Computer Support / Re: Question
« on: August 14, 2017, 08:34:44 pm »
and what is this question?

General Computer Support / Re: You Tube videos don't run.
« on: August 11, 2017, 04:13:43 am »
huh? thats weird give me a snapshot of the window i uploaded what should have popped up

General Computer Support / Re: You Tube videos don't run.
« on: August 11, 2017, 04:00:32 am »
yes that will reinstall the edge app

General Computer Support / Re: You Tube videos don't run.
« on: August 11, 2017, 03:50:11 am »
try this command in powershell (admin)
Code: [Select]
Get-AppXPackage -AllUsers -Name Microsoft.MicrosoftEdge | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml” -Verbose}it will spit out in yellow the verbose of what it does let me know

oh another thing about safemode is if you are running with wifi 3rd party drivers don't load so even in safemode with networking you probably won't get internet unless you are hardlined in the router.

weird after you hit the reboot to safe mode on the second box when it says safemode set would you like to reboot now hit no open up cmd type in
Code: [Select]
bcdedit /enum
Windows Boot Manager
identifier              {bootmgr}
device                  partition=\Device\HarddiskVolume4
path                    \EFI\MICROSOFT\BOOT\BOOTMGFW.EFI
description             Windows Boot Manager
locale                  en-US
inherit                 {globalsettings}
default                 {current}
resumeobject            {114ff4f3-701b-11e7-8577-a33ddabf8e12}
displayorder            {current}
toolsdisplayorder       {memdiag}
timeout                 30

Windows Boot Loader
identifier              {current}
device                  partition=C:
path                    \Windows\system32\winload.efi
description             Windows 10
locale                  en-US
inherit                 {bootloadersettings}
recoverysequence        {114ff4f5-701b-11e7-8577-a33ddabf8e12}
displaymessageoverride  Recovery
recoveryenabled         Yes
isolatedcontext         Yes
allowedinmemorysettings 0x15000075
osdevice                partition=C:
systemroot              \Windows
resumeobject            {114ff4f3-701b-11e7-8577-a33ddabf8e12}
nx                      OptIn
safeboot                Network
bootmenupolicy          Standard
let me know if it says safeboot and network like how this looks.

hmmm okay which version of windows are you running exactly?

yep that is your antivirus killing the repairs so what you need to do is go in safe mode. and the no networking issue if you see a red x over the network adapter its a lie windows 10 likes to say it has no connection in safemode when it does its weird.

i see your problem see kaspersky on the bottom you need to run the program in safemode with networking your antivirus killed the repair from running go ahead and stop the repairs for now and hit the reboot to safe mode re run all the repairs.

Pages: [1] 2 3 ... 42