Messages

1

General Computer Support / Re: file will not open!!!!!

« on: February 29, 2020, 06:55:00 pm »

I ran that HDSentinel  it came back great no problems I try to run my flying game got this error 80004005 try some things found on google it still has something about securitiy check all of them and I am allow on all of them????

2

General Computer Support / Re: file will not open!!!!!

« on: February 29, 2020, 04:03:39 pm »

I ran that Driver Hub it did get that driver in!!! Also about half way installing another driver BLUE screen....I think it said Power Driver Failure not sure but it seems ok I thikk I going to run Driver Update Pro

3

General Computer Support / Re: file will not open!!!!!

« on: February 29, 2020, 03:25:12 pm »

I did get into safe mode ran SFC Scanow it passed I did try to do the driver no go same thing please note when I re booted up no sign in option password only went in to change it no go??? The program I used was Driver Update Pro.They called me the day I got it in the kid was lost as a goose was to called Friday but no show.....Thanks for the help

4

General Computer Support / Re: file will not open!!!!!

« on: February 29, 2020, 12:29:09 pm »

Yes it is window 10 Pro nothing else  except malbytes google I look at the web page and every thing it ask to change was already set the why they wanted it??? So it did not help I'am looking at the Restoro any other ideas????

5

General Computer Support / file will not open!!!!!

« on: February 28, 2020, 06:45:54 pm »

I re in stalled windows 10 PRO it booted up no mouse or keyboard?? So I re in stalled it of the media 10 everything is ok .The old serial ATA controller no driver I have them in  many places from desktop to other drives.It will not open the file at any of them?? I checked security I'am allow on most of them the others would not let me??  I have a driver program but not help....Any ideas??? Thanks.....Scott

6

General Computer Support / Re: no mouse

« on: November 18, 2019, 02:23:17 pm »

Hey guy got it where I can boot up of the thump drive just did it and try the repair it did not help.Should I just go ahead an put it in???? It will boot up in safe but no mouse

7

General Computer Support / Re: no mouse

« on: November 16, 2019, 04:09:54 am »

ok thanks

8

General Computer Support / Re: no mouse

« on: November 16, 2019, 03:27:45 am »

no it did report any bad sectors   On the BIOS I can not get in to it now?? try three times it would not go in yo BIOS ??? Here some pics I took yesterday

9

General Computer Support / Re: no mouse

« on: November 15, 2019, 04:38:43 pm »

Yes got that chkdsk ran it found some problems but fix them I look in my BIOS it is set up default with the DVD at the top also my F12 is also set at the top??

10

General Computer Support / Re: no mouse

« on: November 15, 2019, 09:39:20 am »

Finally got in to safe mode by shutting down 3 times and same thing no mouse or key board!!!!   can't boot up from my DVD I made ??  What do you think I go ahead and format my "C" drive I have an old windows 10 pro put it in and let it up date ??? PS>> you may need to help me with the formate ?? I got around an ran that chkdsk it took a while it went all the way up to stage 5 but repair it

11

General Computer Support / Re: no mouse

« on: November 15, 2019, 07:34:25 am »

OK I can not boot up from the DVD I made or the thump drive.But I can boot up and run the thump drive thats windows 10 pro is on ??? here two pics from my BIOAS and F12  take a look get back with me thanks

12

General Computer Support / Re: no mouse

« on: November 14, 2019, 05:46:55 pm »

Try to go Thur windows got all the way to click for account and no mouse or keyboard??? Now what?? Also try holding down shift thru restart it did not work

13

General Computer Support / Re: no mouse

« on: November 14, 2019, 08:34:17 am »

o k now why can't I boot up of of the Media creation tool 1903 ?? Is not that they only way to get an real reset?? I got and E-Mail a few moments ago follow the link and nothing was their????

14

General Computer Support / Re: no mouse

« on: November 14, 2019, 06:08:48 am »

ok maybe later thanks   Could you answer my question in the last post about format my C drive thanks a lot.....Scott

15

General Computer Support / Re: no mouse

« on: November 14, 2019, 03:40:15 am »

off of the thump drive,but I think it re install it not a clean one..Here is a picture of my C drive

16

General Computer Support / Re: no mouse

« on: November 13, 2019, 05:22:25 pm »

i ran bcdedit /deletevalue {current} safeboot got this an error occurred while attempting to delete the sepecified data element.  To answer your question I with thur the windows recovery re boot up I think it is number 5 I will try the other thing that you sent First why can't I boot up off that drive?????Last time I went to F12 saw my usb thump drive hit it and said could not find an operating system something about disconnect all other drives......Just wonder why it will not boot off the thump drive  ??? Thanks  Ok I want to make sure I reading this right you want me to format my C drive ??? were I have windows?? I have sent you some pictures one is my disk manager the other is my C drive  and my D drive let me know what you think,thanks

17

General Computer Support / Re: no mouse

« on: November 13, 2019, 02:51:51 pm »

ran bcdedit /deletevalue  {currrent}    got run bcdedit /? for command line assistance  Element not found      went ahead and re installed  windows 10 pro but still no mouse in safe mode

18

General Computer Support / Re: no mouse

« on: November 11, 2019, 04:35:12 pm »

no I can not,no mouse key board arrows don't work pgup and pgdn work ctrl and alt work but I think that is about all

19

General Computer Support / no mouse

« on: November 11, 2019, 02:13:17 pm »

Try to boot up in safe mode Windows 10 Pro would not do it. Ran an SFC scannow it passed ran an DISM /online/cleanup it pass try going to "run msconfig it booted in to safe mode but no mouse..Any ideas but this really no big deal Thanks.....Scott

20

General Computer Support / Re: blue screen ????

« on: September 18, 2019, 03:59:14 pm »

to answer you no it will not boot I did the the BIOS thing no go i got thinking after I change the BIOS went back to it hit f 9 reset defaults it booted up!!!!  I guess I will try to put it in .   IT is IN !!!!!! I can't believe it but it is IN ...Thank you for all your help and patience......Scott

21

General Computer Support / Re: blue screen ????

« on: September 18, 2019, 03:34:32 pm »

sorry guy I guess I did do it wrong I just ran one it did pass but right now it will not boot up with out me doing f 12.When I try to boot up off of my media stick I get "An operating system was't found .Disconnection any drives that don't contain operating systems press any key"

22

General Computer Support / Re: blue screen ????

« on: September 18, 2019, 11:48:32 am »

Well you are not going to believe this one I have the updated version in 1903 Build 18632.356 It is all updated it saids it updated on all drivers see pic. Then I run a SFC \scannow and see the second pic...I will bet you a hundred bucks I put fsx in an do all those fixes I sent you it would blue up???? Please tell me what to do thanks ................Scott  also ant idea how to boot up after blue screen?the only way I have to work is to put in my windows 10 pro stick and the two times it would not repair it had to install

23

General Computer Support / blue screen ????

« on: September 18, 2019, 09:21:15 am »

I try to but FSX back in got it go but when I booted up got the blue screen it re booted before I could read why. It did not boot up got it going now but here is all that I did before the blue screen.I really thought I had a real good windows in no updates ran an SFC \scannow it pass ??? Here it is see what you think   thanks........Scott

24

General Computer Support / Re: control panel access denied

« on: September 12, 2019, 05:11:38 am »

you bet the whole thing is running great..  Take care

25

General Computer Support / Re: control panel access denied

« on: September 11, 2019, 06:42:25 pm »

once the got it take driver it show up here