Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - tsmith

Pages: [1]
1
Anyone Know where this file could be from VFDFix.exe it was inside a folder on my machine I had not seen before until I tried to use a folder from inside drobox called vault. I am not sure if dropbox created it but I do not think so because it was dated 2/25/2016. Any help would be appreciated. I think I should delete it or not. I dont like executable files when I dont know where its from. Thanks in advance. Windows 10 operating system. 

2
Im running windows 10 64-bit and have an elite desk 800 g3 and the power supply i believe is 180 watts.
I am wondering if I can update the power supply and or get a better GPU.
I have heard that this computer has a weird connection to the motherboard from the power supply that would have to be worked around somehow to switch the power supply.
At this point I am not sure if its worth updating or not? It runs pretty good except when I have multiple monitors plugged in and the data on the monitors is busy. Im told this processor will not work with windows 11 so I am not sure how long I will be able to keep using it.
I would update it if I can figure out what I need to do to replace the GPU VX2250 SERIES on NVIDIA GeForce GT 730.
There also is a built in GPU in the Intel HD Graphics 630.
can you recommend which way I should connect my monitors to have the most memory available? Is there a better way to connect the monitors to the 2 graphics devices? Should I connect 2 monitors to the NVIDIA or only 1 to the Nvidia or ?
If I can update this power supply can you recommend what power supply to get and what GPU to buy.
For now until I change the GPU and power supply should 2 of my monitors connect to the nvidia or 2 monitors connect to the Intel graphics 630 to make it have the most memory available?  Do you think a new power supply would be possible into this hp computer?
What graphics card is there now that would run with the existing power supply of 180 watts that would be worth switching to if any?
Also can you recommend an app or program that I can install that will help me to visualize what those graphics cards are doing? 
I ran Speccy and see that virtualization is supported but is showing that its disabled. Do you think I should enable it and if so what is that going to do?
   

Manufacturer   Intel
   Model   HD Graphics 630
   Device ID   8086-5912
   Revision   5
   Subvendor   HP (103C)
   Current Performance Level   Level 0
   Current GPU Clock   0 MHz
   Voltage   0.950 V
   Driver version   30.0.101.1994
 
it has an
i7 7th gen Intel Core i7 7700 @ 3.60GHz
Kaby Lake 14nm Technology
Manufacturer   HP
Model   8299 (U3E1)
Version   KBC Version 06.29
Chipset Vendor   Intel
Chipset Model   Kaby Lake
Chipset Revision   05
Southbridge Vendor   Intel
Southbridge Model   Q270
Southbridge Revision   00
   BIOS
      Brand   HP
      Version   P01 Ver. 02.39
      Date   11/17/2021
   PCI Data
         Slot PCI-E
            Slot Type   PCI-E
            Slot Usage   In Use
            Data lanes   x16
            Slot Designation   Slot1 / X16PCIEXP
            Characteristics   3.3V, PME, SMBus
            Slot Number   0
         Slot PCI-E
            Slot Type   PCI-E
            Slot Usage   Available
            Data lanes   x1
            Slot Designation   Slot2 / X1PCIEXP1
            Characteristics   3.3V, PME, SMBus
            Slot Number   1
         Slot PCI-E
            Slot Type   PCI-E
            Slot Usage   In Use
            Data lanes   x1
            Slot Designation   Slot3 / X1PCIEXP2
            Characteristics   3.3V, PME, SMBus
            Slot Number   2
         Slot PCI-E
            Slot Type   PCI-E
            Slot Usage   In Use
            Data lanes   x4
            Slot Designation   Slot4 / X4PCIEXP
            Characteristics   3.3V, PME, SMBus
            Slot Number   3
         Slot PCI-E Gen 3 x1
            Slot Type   PCI-E Gen 3 x1
            Slot Usage   Available
            Data lanes   x1
            Slot Designation   Slot5 / M2 WLAN/BT
            Characteristics   3.3V, PME, SMBus
            Slot Number   4
         Slot PCI-E Gen 3 x4
            Slot Type   PCI-E Gen 3 x4
            Slot Usage   In Use
            Data lanes   x4
            Slot Designation   Slot6 / M2 SSD
            Characteristics   3.3V, PME, SMBus
            Slot Number   5
RAM
      Memory slots
         Total memory slots   4
         Used memory slots   4
         Free memory slots   0
      Memory
         Type   Unknown
         Size   65536 MBytes
         Channels #   Dual
         DRAM Frequency   1196.8 MHz
         CAS# Latency (CL)   17 clocks
         RAS# to CAS# Delay (tRCD)   17 clocks
         RAS# Precharge (tRP)   17 clocks
         Cycle Time (tRAS)   39 clocks
         Command Rate (CR)   2T
      Physical Memory
         Memory Usage   36 %
         Total Physical   64 GB
         Available Physical   40 GB
         Total Virtual   73 GB
         Available Virtual   46 GB
      SPD
         Number Of SPD Modules   4
            Slot #1
            Slot #2
            Slot #3
            Slot #4

3
General Computer Support / Tascam Us-1800 Stopped Working Today
« on: October 03, 2021, 09:52:58 am »
I have a Tascam US-1800 USB 2.0 Audio Interface that stopped working today or yesterday. October 3rd today 2021. I tried to reinstall the most recent driver but keep getting an error message Installation failed. Contact Tascam customer support (Error:Timeout-0x0005). I realize this is discontinued but it has been working well up to yesterday. Seems to be just an issue with some stupid windows update or something I cant figure out. Anyone out there know the procedure I should follow to get this up and running again?? TIA

Taylor
 I have windows 10 Pro 64 Bit    Intel Core i7 7700 @ 3.60GHz   46 ?C
   Kaby Lake 14nm Technology
RAM
   32.0GB Dual-Channel Unknown @ 1196MHz (17-17-17-39)
Motherboard
   HP 8299 (U3E1)
Graphics
   2236 (1920x1080@60Hz)
   ORION (1920x1080@59Hz)
   Intel HD Graphics 630 (HP)
   2047MB NVIDIA GeForce GT 730 (Unknown)   45 ?C
   SLI Disabled
Storage
   1863GB Samsung SSD 860 EVO 2TB (SATA (SSD))   31 ?C
   1907GB INTEL SSDPEKNW020T8 (Unknown (SSD))
Optical Drives
   No optical disk drives detected
Audio
   Synaptics HD Audio
Audio
      Sound Cards
         NVIDIA High Definition Audio
         Synaptics HD Audio
         USB Audio Device
         Intel Display Audio
      Playback Devices
         ORION (Intel Display Audio)
         Speakers (2- Yeti Stereo Microphone)
         Speakers (Synaptics HD Audio)   (default)
      Recording Device
         Microphone (2- Yeti Stereo Microphone)

4
Hi, i have owned a copy of Tweaking windows repair for a long while and have tried to use it but am worried I dont know what the heck I am doing and was wondering if you can direct me to the place I can learn to use the software effectively. I also am wondering if you can recommend a file manager to use. My cell phone is 32 GB and I am always almost always short on space. I have moved as many things as I can think of to a memory card but am wondering if there is something I can do to make more room inside my phone. I also was wondering about these programs if they work well with windows 10 and if you recommend installing these ? Thanks so much for iyour time!
Simple System Tweaker : Tweaking.com - Simple System Tweaker is designed to bring only the safest tweaks to your system to increase speed and stability. You can get faster boot & shutdown times, faster network file sharing, snappier feel to opening Windows and programs, and more stability. The system in all should feel smoother.

Tweaking.com - Registry Compressor : The Windows Registry is a hierarchical database that stores configuration settings and options on Microsoft Windows operating systems. Just like databases, the registry can become bloated and large when there has been a lot of additions and deletions from the registry. This program does NOT remove or add anything to the registry. What it does is it rebuilds the registry to new files, when this happens all the overhead is gone, and the registry is smaller and faster.

Tweaking.com - (Right Click) Allow, Block or Remove - Windows Firewall : The point of this program is to make adding/removing programs to/from your Windows firewall easier than ever. This program will add a right click option to all .exe and .com programs, allowing you to allow, block or remove a program from the Windows firewall in 1 click.

Registry Backup : A free backup tool that will use the Windows Volume Shadow Copy Service to backup your system registry. By using the Volume Shadow Copy theregistry backup program is safer to use.

Tweaking.com - svchost.exe Lookup Tool : Tweaking.com - svchost.exe Lookup Tool can show all currently running svchost.exe on the system and what service each one belongs to. If you have ever noticed svchost.exe in your task manager taking a large amount of memory or high CPU, you wonder what it belongs to. svchost.exe is used to run certain services in Windows.

5
I cant get the windows quick links to work anymore after a windows crash. I right click the tweaking icon in the taskbar and use to be able to go 1 of many options including the windows quick link but now when I open the quick link I am told that a pro version is required. I do have the pro version but my computer seems to have that part of the program left over in the cache or something like that. Can you tell me what to do to get that working again.

6
Windows 10 Pro 64-bit

For some unknown reason, the web pages I look at have letters in the wrong place, the word the is often spelled like this (teh), the word TEMP shows up in front of some words and it was not suppose to be there. I would think its a driver problem but my drivers are reported to be upto date not sure what to do at this point---just a general odd layout. I have attached an image of some of the weird items. TIA! :confused: :undecided:

7
I have recently installed windows 10 over windows 7. I had paid for a pro version of the windows repair program and tried opening the program today for the first time in a long time and the program suggested I update so I starting the update program and it stopped installing and told me to reboot. Since then it has not acted the same. It seems like its no longer working correctly. Is there a fix for this? TIA

Pages: [1]