Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Tomas_Sweden

Pages: 1 ... 4 5 [6] 7 8 9
126
Tweaking.com Support & Help / Re: Registry Backup Beta
« on: September 19, 2012, 08:35:12 pm »
The latest version of RB doesn't always work for me.
I have tried to delay autoback and have only 1 backup per day, but I get "fallback backup method".

There is something with 1.4.2 and 1.4.1 that doesn't work so good for me. Version 1.4.0 worked better.

What is changed in the later versions?

Tomas

127
Tweaking.com Support & Help / Re: Registry Backup Beta
« on: September 14, 2012, 05:43:21 am »
I installed 1.4.1 official version and then I started the computer this morning "autobackup" was using "Fallback backup method" and VSS didn't start.

this is from the log file:
2012-09-14 - 05:34:22] Waiting for Volume Shadow Copy snapshot...
[2012-09-14 - 05:35:22] Volume Shadow Copy Failed! vss_7_64.exe isn't running. Check the Log_VSS.txt file to view any errors.
[2012-09-14 - 05:35:22] Is vss_start.exe Running: True
[2012-09-14 - 05:35:22] Is vss_7_64.exe Running: True
[2012-09-14 - 05:35:22] Is vss_pause.exe Running: False

I have tried to delay "autobackup" 4 minutes it works sometimes and sometimes vss fails.

Tomas

128
Tweaking.com Support & Help / Re: Registry Backup Beta
« on: September 13, 2012, 11:56:09 am »
Quote from: neroilo on September 13, 2012, 11:44:41 am
Quote from: Tomas_Sweden on September 13, 2012, 10:56:47 am
I saw on my brothers computer (win xp) that scheduled backup started "Registry Backup v1.4.1(latest beta)" but nothing happened, vss didnt start and there was no log file that so ever so I could see that was wrong.
In "the Task Manager" I closed "Registry Backup" and after that I tried "manual backup" :wink: and it worked, I did a logoff and log in again then autobackup worked as usual.
But autobackup usually works!
It may be that my brother's computer is tricky, just wanted to tell if it's something not right.

Tomas

If you perform a manual backup, and the same day an auto backup, the last one won't have success because there is already a manual backup.
Is it your case?

Nope! Sometimes "autobackup" doesn't work, "Registry Backup" starts and if I take a look in process explorer it says RB is running and nothing happens, eventually I have to end the program.  I have not found anything patterns, when it goes wrong and why.

Tomas

129
Tweaking.com Support & Help / Re: Registry Backup Beta
« on: September 13, 2012, 10:56:47 am »
I saw on my brothers computer (win xp) that scheduled backup started "Registry Backup v1.4.1(latest beta)" but nothing happened, vss didnt start and there was no log file that so ever so I could see that was wrong.
In "the Task Manager" I closed "Registry Backup" and after that I tried "manual backup" :wink: and it worked, I did a logoff and log in again then autobackup worked as usual.
But autobackup usually works!
It may be that my brother's computer is tricky, just wanted to tell if it's something not right.

Tomas

130
Tweaking.com Support & Help / Re: Registry Backup Beta
« on: September 12, 2012, 02:27:40 am »
I have tried the latest 1.4.1 now on my win 7 64-bit computer, have also tried on my brothers win xpsp3 computer and it worked.  :cheesy:

But I noticed both on my computer and my brothers that after windows update have installed som new file and rebooted that Registry Backups vss.exe didn't start. But I rebooted once more then tried autobackup and manual backup, now it works all the time.

What do you think about changing "Default Backup Name:" From "My Backup" to "Manual Backup"? Feels more logical! I have seen people on this forum calling "Default Backup Name:" for Manual so... :thinking:

Tomas

131
Tweaking.com Support & Help / Re: Registry Backup Beta
« on: September 10, 2012, 06:50:50 am »
I have noticed on my brothers computer "win xp sp3" that making autobackup with Registry Backup v1.4.1 have worked!  :smiley:  Without any VSS problem. I think that VSS works faster on Win xp.  I haven't seen any error either with autobackup like I have explain earlier, but its to early to say if the that problem is gone, but so far so good.

Tomas

132
General Computer Support / Re: No network sharing after Windows Repair (AIO)
« on: September 10, 2012, 03:18:10 am »
Maybe this can help you: Network Discovery will not stay on
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/network-discovery-will-not-stay-on/39df3c12-1632-459f-9c7e-bffe7d65f68a

Or this: file sharing and network discovery settings
http://social.technet.microsoft.com/Forums/en-US/itprovistanetworking/thread/29373cf8-0c1b-4bdb-aeb2-8bf458adef27

Tomas

133
General Computer Support / Re: context menu
« on: September 10, 2012, 12:14:35 am »
 :wink:

134
General Computer Support / Re: No network sharing after Windows Repair (AIO)
« on: September 10, 2012, 12:12:11 am »
Quote from: Marcoevich on September 09, 2012, 01:04:08 pm

Hmm, why would I have to look there? File sharing always worked correctly, and now those features would suddenly be removed? That's a rather agressive approach if you ask me..

I am sorry I read it wrong  :shy:

Have you looked so Windows Firewall isn't blocking File and Printer Sharing?

"Cannot turn on “Network Discovery and File Sharing” when Windows Firewall is enabled"
http://superuser.com/questions/375042/cannot-turn-on-network-discovery-and-file-sharing-when-windows-firewall-is-ena

[How To] Enable Sharing Files And Folders In Windows 7
http://techrena.net/how-to-enable-share-files-folders-settings-firewall-windows-7/

Tomas

135
General Computer Support / Re: No network sharing after Windows Repair (AIO)
« on: September 09, 2012, 10:26:56 am »
Enable
Quote from: Marcoevich on September 09, 2012, 10:03:17 am
I have verified that all required services are running. So, what could have caused this? Is there anything I can do to enable file&printersharing again?

Have you tried this?: http://windows.microsoft.com/is-IS/windows7/Turn-Windows-features-on-or-off
and http://www.sevenforums.com/tutorials/185237-network-discovery-turn-off-windows-7-a.html

Tomas

136
General Computer Support / Re: context menu
« on: September 09, 2012, 05:20:30 am »
Take a look at this: http://www.sevenforums.com/tutorials/5458-windows-explorer-context-menu-enable-disable.html

Tomas

137
Tweaking.com Support & Help / Re: Registry Backup 1.4 Schedule
« on: September 09, 2012, 02:16:43 am »
Open "Registry Backup" go to "Settings" click on "Edit Schedule" go to "Task Scheduler Library" and double click on "Tweaking.com - Registry Backup" if it is there! (If not click on "Create Schedule" under "Settings" in "Registry Backup")
In "Properties for Tweaking.com - Registry Backup" choose "Triggers" edit and "Start activity" change to "On a schedule" and change to what you want. Then click ok and ok again.

This is for win 7 and vista (I think)

Tomas

138
Tweaking.com Support & Help / Re: Registry Backup Beta
« on: September 08, 2012, 05:38:33 am »
Since I have tried the latest release 1.4.1 my volume shadow copy doesn't start!
But my program show that Volume Shadow Copy is started. (Yes it is started in services)
I don't have checked "Always use Fallback Method instead of Volume Shadow Copy".

If I look in Event Viewer on VSS I have this errors:
"IMultiInterfaceEventControl::GetSubscriptions 0x80010108,  event id 8193" and "Error occurred in the COM + interface publishing Writers: Backup Shutdown [0x80042302, a component of the Volume Shadow Copy Service encountered an unexpected error. event id 12291."

If I go back and use 1.4.0 then everything works with the same configurations!  :confused:

Tomas

139
General Computer Support / Re: Control Panel-System-Device Manager does not work after running
« on: August 23, 2012, 12:15:39 am »
Quote from: Shane on August 21, 2012, 10:44:22 pm

If you ever want to help me trace down what changed I do have an idea.

I have a program from a long time ago that I keep. It will scan and keep a copy of the reg keys. You then make changes and scan it again and then you can have it show any changes between the two.

I'm curious which program it is? Is it "RegFromApp"?
RegFromApp monitors the Registry changes made by the application that you selected, and creates a standard RegEdit registration file (.reg) that contains all the Registry changes made by the application. You can use the generated .reg file to import these changes with RegEdit when it's needed.
http://www.nirsoft.net/utils/reg_file_from_application.html

Tomas

140
Tweaking.com Support & Help / Re: Registry Backup Beta
« on: August 17, 2012, 10:45:47 pm »
Ok, lets hope it's just on my brothers computer! 

Tomas

141
Tweaking.com Support & Help / Re: Registry Backup Beta
« on: August 17, 2012, 10:32:04 pm »
On my win7 64-bit it's working fine! I have it set to run under "Current User Account" in Task Scheduler on my computer.

Tomas

142
Tweaking.com Support & Help / Re: Registry Backup Beta
« on: August 17, 2012, 10:10:05 pm »
I wonder if the crash I have seen with "Registry Backup" on Win xp  is only on my brothers computer or if it's a common problem?

Tomas

143
Tweaking.com Support & Help / Re: Registry Backup Beta
« on: August 16, 2012, 12:50:21 am »
I have installed Tweaking.com - Registry Backup 1.3.0 on my brothers computer (Windows Xp Sp3) and have it to run with Task Scheduler
every time "at log on", now I have it to Run under system account, but sometimes then the computer starts an error message will occour:
Application Error Event ID: 1000 "Faulting application TweakingRegistryBackup.exe, version 1.3.0.0, faulting module unknown, version
0.0.0.0, fault address 0x00000003."

And then I look in C:\WINDOWS\Tasks there is the error code: oxcoooooo5.

Then I look in Registry backup, the backup has been made and everything seems normal with that. I have tried to run Task Scheduler under
Current User Account and with "run only if logged on" and I have tried to uncheck the same.

It doesn't crash on every reboot.

Then I look at Log_Vss and at the end it says: "Cancel failed to end program."

I attach the log files.

Tomas

144
Tweaking.com Support & Help / Re: Registry Backup Beta
« on: August 16, 2012, 12:31:26 am »
Thank you for showing me the hotfix! I've installed it. I watched my log file how long time the Task Scheduler Backup takes, and August 8
it took 120 sec, then 9 Aug it took 90 sec and yesterday (15 aug) it took about 70 sec. After I've installed the hotfix it takes about 60
sec or less, so about 10 seconds faster. I don't know what happened after August 8, after that the backup has been much faster. Anyway
thank you for the tip!  :cheesy:

Tomas

145
General Computer Support / Re: [SOLVED] Disk Defragmenter is gone !! windows 7 !! help please !!
« on: August 02, 2012, 10:42:53 am »
Nice that it is working now!  :cheesy:
I had an issue with Avast Antivirus last week, I couldn't use System Restore, but then I uninstalled it, then the System Restore worked!  :rolleyes:
So I installed MSE instead!

Tomas

146
General Computer Support / Re: Disk Defragmenter is gone !! windows 7 !! help please !!
« on: July 27, 2012, 12:48:59 pm »
I don't have any dfrg.inf, but it works anyway for me. Maybe somebody else have the file for you?

Tomas

147
General Computer Support / Re: Disk Defragmenter is gone !! windows 7 !! help please !!
« on: July 27, 2012, 12:22:46 pm »
I think you can try to do this again!

A:
a. Open the "Start" menu.
b. Type %Windir%\Inf in the "Search" box and press "Enter".
c. In the window that opens, find the file named "dfrg.inf".
d. Right-click on "dfrg.inf" and "Install."

B:
a. Go to "Start > type cmd" on your computer.
b. Copy and paste rundll32.exe setupapi,InstallHinfSection DefaultInstall 132 %windir%\inf\dfrg.inf and press "Enter"
c. Click "OK" to make the program automatically reinstall itself.
 
C:
a. Go to Start >All Programs>Accessories>Right Click on Command Prompt> select "Run As Administrator"
b. At command prompt, type regsvr32 dfrgsnap.dll and hit "Enter."
c. Type regsvr32 dfrgui.dll and hit "Enter."

Tomas

148
General Computer Support / Re: Disk Defragmenter is gone !! windows 7 !! help please !!
« on: July 27, 2012, 11:36:48 am »
1. In services again ensure that the following services are running and set on Automatic.
 
Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper


2. Verify that the Page File isn’t turned off.
 
To do so, Click Start, right click Computer > Properties > Advanced system settings >  Advanced tab > Performance > Settings > Performance options > Advanced tab > Virtual Memory > Change > Ensure that Automatically manage Paging file size for all drives is checked. Make sure that No paging file is NOT selected.

Tomas

149
General Computer Support / Re: Disk Defragmenter is gone !! windows 7 !! help please !!
« on: July 27, 2012, 11:16:21 am »
Is Disk Defragmenter there now in services? (type services.msc in search), if it is set to disabled change to manual.

Tomas

150
General Computer Support / Re: Disk Defragmenter is gone !! windows 7 !! help please !!
« on: July 27, 2012, 10:29:02 am »
Have you tried try running the defragmenter in Safe Mode (Then you start your computer press F8 and in Advanced Boot Options Choose "Safe Mode"). If it runs, something is interfering with it and tracking the interference down may not be easy. Note: Some versions of Win 7 disable the ability to run the built in defragger in safe mode. If disabled, it will say so when trying to run it in safe mode.

Tomas

Pages: 1 ... 4 5 [6] 7 8 9