Author Topic: Many Blue screens no mnatter how many Tweaks I run  (Read 21881 times)

0 Members and 1 Guest are viewing this topic.

Offline XDamian

  • Newbie
  • *
  • Join Date: Nov 2014
  • Posts: 11
  • Karma: 0
    • View Profile
Many Blue screens no mnatter how many Tweaks I run
« on: November 22, 2014, 12:24:45 am »
Windows 7 I am the admin, it is an XPS L701X which is my fav. I tried opening the DMP file but could not locate the proper app to do so. Please help here. I did send the Screen of the error I usually get. Perhaps you can help

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #1 on: November 22, 2014, 06:42:28 am »
WhoCrashed will be able to find it for you and give an interpretation which you can post http://www.resplendence.com/whocrashed

What security programs do you have installed and have you checked to see if the BSODs still occur in Safe Mode with Networking ?

Any Event Viewer errors with a time stamp the same as the BSODs occur will also help Shane, but he's not likely to be back until late Sunday or until Monday.

Offline XDamian

  • Newbie
  • *
  • Join Date: Nov 2014
  • Posts: 11
  • Karma: 0
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #2 on: November 23, 2014, 12:41:51 pm »
First off thanks for the suggestion. However, every single incidence of the crash states it is possible another driver may have caused the crash. The latest crash   left this in the Event viewer.

Service 'WMPNetworkSvc' did not start correctly because CoCreateInstance(CLSID_UPnPDeviceFinder) encountered error '0x80004005'.

I have seen this a number of times. Googling WIndows comes  up with this:"Call CoCreateInstance when you want to create only one object on the local system. To create a single object on a remote system, call the CoCreateInstanceEx function. To create multiple objects based on a single CLSID, call the CoGetClassObject function"
 HOWEVER i AM NOT CERTAIN WHAT objects I am trying to call simultaneously.

I have McAfee and MBAM (Malwarebytes) as well as Peerblock although of course the last two are quasi security. When I want to run more safely I have Firefox set up through 2/3 European jumps without being able to trace it back to me using JonDO but I have noticed these BSOF come on whether I turn JonDo on or not.

As far as RUNNING REPAIRS in TWeaking.com in SAFEMODE WITH NETWORKING AFTER FOLLOWING EACH AND EVERY option from start to finish, THIS I have done.   However, I have never run my computer in Safe/NEtworking  when I simply want to use it. so I can't answer that question. I hear you strongly suggesting it to ferret out my problem, yes? Is there a way to change the resolution once you are there, because in various apps the resolution in Safe mode becomes a real pain\

I will await SHANE and thanks again for your response. Much appreciated. I am wondering if a simple loose AC/Adapter could have caused this BUT when I checked the power icon on my battery I was at 100% charge when I returned home and found I had received a BSOD while I was away, and no I don't have any cats, or pets. It was simply on a browser page the whole time. And of course the reliability report was cryptic as ever:
WIndows shut down unexpectedly.
ANd yes I run virus scans  full 3 times a week and this one I just ran came back clean, as usual.

MyDell which has a BlueScreen trouble shooter simply came back with this message:

"The PCI bus driver appears to have caused a system crash",so I will try and re-install that driver now, however, that is the message from last night (the last one posted on the BSOD troubleshooter), so it has nothing to do with the one I JUST got.

The two PCI bus' in the SYSTEM DEVICES are from 2006 but they are working normally. The PCI in the network adaptor is from 2011 (FAMILY CONTROLLER WHICH i NEVER USE ANYWAY).ANd of course there are no exclamation points anywhere in  my device monitor.

SO I HAVE PRETTY MUCH HAVE REACHED THE END OF MY DIAGNOSTIC CAPABILITIES AFTER running the WIndows Diagnostics and the BIOS Diagnostics and the DELL diagnostics  because they all come back clean, even the one I let run for 16 hours that was mostly checking out the memory. The dskchk  from the tweak in safe mode also came back clean as did the system file check ,and as I mentioned all this done strictly from the point of draining my power completely with both AC and the battery pack out etc. (Please ignore caps. They have a tendency to do that themselves without any clear indication except for a very tiny "A" without a line through it which is very easy to miss situated above my keyboard .
Thanks for any help or clarity thrown on this situation. I am open to any ideas at all short of doing a re-image of my OS.

Offline XDamian

  • Newbie
  • *
  • Join Date: Nov 2014
  • Posts: 11
  • Karma: 0
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #3 on: November 23, 2014, 12:51:12 pm »
I forgot to add I ran the Dell OS disk (re-installation) which has a partition to do diagnostics also and to run without doing a complete re-image but indicates it can help repair certain issues without being very specific.

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #4 on: November 23, 2014, 01:55:12 pm »
The PCI Bus Controller is usually either part of the Chipset or Video drivers (AMD), so I would suggest going to Dell Support and downloading those for your laptop model.

BSODs are usually caused by driver problems.

I'm not familiar with that Dell repair and where reimages are concerned, there is a risk of losing all of your personal stuff as you would with a factory reset.

See if downloading those drivers makes a difference.

Offline Shane

  • Administrator
  • Hero Member
  • *****
  • Join Date: Sep 2011
  • Posts: 9281
  • Location: USA
  • Karma: 137
  • "Knowledge should be shared not hidden."
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #5 on: November 23, 2014, 11:31:48 pm »
What did the whocrashed report say though?

Shane

Offline XDamian

  • Newbie
  • *
  • Join Date: Nov 2014
  • Posts: 11
  • Karma: 0
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #6 on: November 25, 2014, 04:41:33 pm »
The reason I took so long to reply is that the computer just went through the full diagnostics about 36 hours worth in one of the f keys. Of course any assistance with the info below would be appreciated.  (When I check this out , one article says its a registry error and suggests I use  Ntoskrnl Exe Repair Tool  for free, but since I keep DIskeeper running constantly I have my doubts about the registry  being disrupted. But if you have a suggestion where a trusted reg tool will help, I am all ears.) The attachment is simply a picture of what I posted here.

On Mon 11/24/2014 5:01:35 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\112514-19749-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x7F (0x8, 0x80050031, 0x6F8, 0xFFFFF80003C9BE08)
Error: UNEXPECTED_KERNEL_MODE_TRAP
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the Intel CPU generated a trap and the kernel failed to catch this trap.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.


The mwac points to possibly when I tried turning malwarebytes to disabled on the advice of the Dell Specialist because he said it would not run correctly with McAfeee, however I never got that message till I turned it off so I think his advice is wrong since I have been using MWAREB for 2 years without ever seeing that message so I enabled it again.


On Mon 11/24/2014 5:01:35 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: mwac.sys (mwac+0x61B0)
Bugcheck code: 0x7F (0x8, 0x80050031, 0x6F8, 0xFFFFF80003C9BE08)
Error: UNEXPECTED_KERNEL_MODE_TRAP
file path: C:\Windows\system32\drivers\mwac.sys
product: Malwarebytes Web Access Control
company: Malwarebytes Corporation
description: Malwarebytes Web Access Control
Bug check description: This bug check indicates that the Intel CPU generated a trap and the kernel failed to catch this trap.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: mwac.sys (Malwarebytes Web Access Control, Malwarebytes Corporation).
Google query: Malwarebytes Corporation UNEXPECTED_KERNEL_MODE_TRAP





Offline XDamian

  • Newbie
  • *
  • Join Date: Nov 2014
  • Posts: 11
  • Karma: 0
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #7 on: November 25, 2014, 04:54:39 pm »
I thought maybe a list of the latest ADD/Remove installations might be helpful also:(see attach)  The reason I am doing this is because once after uninstalling the latest program, I had a 28 hour respite from the BSOD and figured that was not a coincidence, so I try to eliminate  even the diagnostic programs if I am getting BS's more than previously.

Offline XDamian

  • Newbie
  • *
  • Join Date: Nov 2014
  • Posts: 11
  • Karma: 0
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #8 on: November 25, 2014, 04:56:32 pm »
And as you can tell from the ADD/'Remove page I did replace existing drivers as per the recommendation above.

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #9 on: November 26, 2014, 12:57:18 am »
If you don't need Java v7 for any of the sites you use, then you should run Java's older version removal tool, but if you still need v7 then you should update it to v7 u71.

http://java.com/en/download/ie_manual.jsp?locale-=en

Offline XDamian

  • Newbie
  • *
  • Join Date: Nov 2014
  • Posts: 11
  • Karma: 0
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #10 on: November 26, 2014, 01:50:06 am »
Thanks for the  Java tip. I have both uninstalled old and installed new Java. However both took a rather long time. Is that usual? AND are you suggesting that a BSOD could be due to this seemingly minor faux pas on my behalf?

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #11 on: November 26, 2014, 02:49:47 am »
Thanks for the  Java tip. I have both uninstalled old and installed new Java. However both took a rather long time. Is that usual? AND are you suggesting that a BSOD could be due to this seemingly minor faux pas on my behalf?

No, it's just that leaving older versions on your computer can leave it vulnerable.

When I update Java it can sometimes take a while before the install bar starts to move for me.

While I have Java installed, because of it being prone to exploits I have it disabled in browsers which you can do if not usually needed, by right clicking on the coffee cup in All Control Panel Items - Open - then under the Security tab uncheck the box to Allow in browsers - Apply - then follow the prompts.

I was going to leave your latest BSOD error to Shane but you probably resolved the previous +75bc0 error by updating your drivers.

There is a possibility of compatibility between MBAM and McAfee of which the steps in this article may address. https://forums.malwarebytes.org/index.php?/topic/107694-malwarebytes-mcafee-security-center/
« Last Edit: November 26, 2014, 03:12:54 am by Boggin »

Offline XDamian

  • Newbie
  • *
  • Join Date: Nov 2014
  • Posts: 11
  • Karma: 0
    • View Profile
Re: Many Blue screens no matter how many Tweaks I run
« Reply #12 on: November 26, 2014, 03:14:17 pm »
I guess I am still awaiting Shane's reply. While waiting I loaded an app I used to use (although I stopped using it because McAfee Adviser told me the site has issues). System Mechanics has indicated (and fixed) the 795 registry errors. I understand that THAT is quite a lot. I did not have any when I was using SYSTEM MECHANIC. I have reinstalled it, for certainly among all that mess a BSOD could have been generated, YES? (or no??). SO far, with my fingers crossed, Its now 46 hours since I have seen a BSOD. I am knocking on wood vehemently because in the pit of my gut I sense I am walking a tightrope about 200 feet in the air with my eyes closed.
 However, while you do have the list of drivers I have re-installed as per your suggestion (see the NEW Add/remove list I attached), I would hope I could get some feedback on the former messages which indicated what the app "WhoCrashed" returned.

Offline XDamian

  • Newbie
  • *
  • Join Date: Nov 2014
  • Posts: 11
  • Karma: 0
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #13 on: November 26, 2014, 03:21:10 pm »
I would like to disable java but your instructions do not seem to apply to Chrome. Chrome does show how to disable java Script, but that I understand is not the Java which pertains to the update I just installed. (Or is it?)

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #14 on: November 26, 2014, 04:10:38 pm »
Java Script is something else. http://www.bbc.co.uk/webwise/guides/java-and-javascript

I assumed when you unchecked the box to Allow in browsers it would do it for all.

To check if you still have Java enabled in Chrome, run a ping test from www.pingtest.net

It will tell you if you don't have Java installed/enabled and the packet test will fail.

If you were just running the free version of MBAM then you can use mbam-clean.exe to remove it or any residue and then reinstall to see if you get the same conflict/BSOD.

https://helpdesk.malwarebytes.org/hc/en-us/articles/201861636-How-do-I-uninstall-Malwarebytes-Anti-Malware-

Offline Shane

  • Administrator
  • Hero Member
  • *****
  • Join Date: Sep 2011
  • Posts: 9281
  • Location: USA
  • Karma: 137
  • "Knowledge should be shared not hidden."
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #15 on: November 26, 2014, 06:57:27 pm »
The log you posted shows it was the malwarebytes driver that crashed the system

Quote
This was probably caused by the following module: mwac.sys (mwac+0x61B0)
Bugcheck code: 0x7F (0x8, 0x80050031, 0x6F8, 0xFFFFF80003C9BE08)
Error: UNEXPECTED_KERNEL_MODE_TRAP
file path: C:\Windows\system32\drivers\mwac.sys
product: Malwarebytes Web Access Control
company: Malwarebytes Corporation
description: Malwarebytes Web Access Control

I would uninstall it and see how the system does after it is removed.

Shane

Offline XDamian

  • Newbie
  • *
  • Join Date: Nov 2014
  • Posts: 11
  • Karma: 0
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #16 on: November 28, 2014, 01:24:04 am »
SO far it seems the clean-up of my registry has eliminated the BSOD.  I imagine that is possible since I do not know what sort of conflicts were created by the registry's condition. As to disabling java, I did  but found I really need it for the websites I frequent.  As to re-installing Malwarebyte, I have done that 3 times now. It still hangs and takes up a great deal of memory over time so when I see that happening I simply END it and start it up again.While this is only the third day I have not suffered a BSOD, I am hoping it will stay away from now on.

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #17 on: November 28, 2014, 06:59:49 am »
Are you using the free or the Premium version of MBAM ?

The paid for version has an option for Automatic Scheduling and may be worth looking at its default setting. https://www.malwarebytes.org/support/guides/mbam/AutomatedScheduling.html

Offline XDamian

  • Newbie
  • *
  • Join Date: Nov 2014
  • Posts: 11
  • Karma: 0
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #18 on: December 04, 2014, 08:50:03 pm »
I guess I can leave this as solved but the solution has come as strangely as the problem had. I did and do have the Premium version of Malwarebytes and do use the scheduling mechanism. But this time I uninstalled using their application on their website as opposed to the uninstall app that comes with the bundle. I also have had, as I indicated before, no problems with the BSOD for a week now. SO I am declaring it GONE FOR GOOD!> But if you ask me how come, I can't answer you. I do not know what solved what. But I appreciate the support.

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: Many Blue screens no mnatter how many Tweaks I run
« Reply #19 on: December 05, 2014, 01:05:44 am »
MBAM released an updated version on 2nd Dec. which may resolve the conflict with McAfee. https://www.malwarebytes.org/downloads/

Try the free version first and if all is well then use the uninstaller you got from their website to remove the free version and download the Premium version which you can reactivate with your product key.

I think it would be best to leave the scheduling off if it's taking up as much memory as it has been doing.

I think it was last year that I had to stop using the free version of MBAM because of a conflict with Norton 360 following a MBAM upgrade.

That caused my laptop to freeze with the error that the MMC had stopped which MBAM subsequently fixed, but the problem could equally be because of McAfee Definition updates which in themselves have caused problems - I think it was a couple of years ago that one of them was responsible for blocking Internet connectivity and McAfee had to address - a bit like Microsoft have had to do on more than one occasion because of their updates.

MBAM is a good program to have installed and if you can get it back on without any conflict, I would give it a try.