Author Topic: W 7 update issue_error RC_DataStore code 0X800F081F  (Read 19849 times)

0 Members and 1 Guest are viewing this topic.

Offline mrwoof

  • Jr. Member
  • **
  • Join Date: Apr 2016
  • Posts: 99
  • Location: Dublin
  • Karma: 1
    • View Profile
W 7 update issue_error RC_DataStore code 0X800F081F
« on: April 27, 2016, 12:45:25 pm »
Good evening all. W7 Update issue has been with me for the last few days.
Current behaviour “Checking for updates” runs for many hours without detecting any.
Troubleshooting steps taken,
I installed MS “fix” KB 3135445, nada.
Ran Fix WU Utility v 1.0 ( This utility will re-register a total of 114 .dll,* ocx and .ax files which are required for the proper functioning of Windows Updates. ) nada.
Cleared Windows Update Cache, following correct procedure.nada.
Ran Windows update diagnostic.diagcab which detected issues, (see attch result 1 & result 2) which flagged an error RC_DataStore code 0X800F081F. I have tried researching this to no avail.
I then ran a repair utility from the reputable “tweaking.com” the log attch “Repair_Windows_Updates” which may reveal info to those wiser than me .
I also attch a list of current updates in the system the last being Net Framework 4.6.1.
The Dell laptop is clean of infections / malware and stable. Security essentials updates do run well. So I'm out of ideas now and welcome your input .
« Last Edit: April 29, 2016, 11:35:50 am by mrwoof »

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #1 on: April 27, 2016, 03:46:40 pm »
A manual check for updates taking ages in Win 7 has been a widespread problem for a little while now and just waiting for them to come, usually has been the only solution - although manually installing a couple of specific updates has oiled the wheels for some.

You seem to have a different problem though and one I've never seen before and MS don't seem to give any help for that error in Win 7, other than perhaps to run a sfc /scannow.

See what the System Update Readiness Tool (SURT) can do.

http://windows.microsoft.com/en-gb/windows7/what-is-the-system-update-readiness-tool

This is a little over a 500MB download and also does a check for updates so can also take a while to run and when done, you can view its log in C:\Windows\Logs\CBS

Double click on the Checksur one and that will open in Notepad - but first, run the Pre-Scan in Option 2 of Windows Repair and if there is any Package File corruption, open a thread in the Cat and Mum File Requests section, posting the Pre-Scan report.




Offline mrwoof

  • Jr. Member
  • **
  • Join Date: Apr 2016
  • Posts: 99
  • Location: Dublin
  • Karma: 1
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #2 on: April 27, 2016, 04:50:08 pm »
Thanks for the reply. SFC scannow detected as all well. Its late here so I'l try that tool tomo. You have reminded me that Belarc Advisor also detects & identifies missing updates.
Can you see anything helpfull in the tweaking repair log ?

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #3 on: April 27, 2016, 05:24:19 pm »
I think I had similar in my WR log, but it's the Pre-Scan in Option 2 of the program I want you to run to see if that reports corruption as that can affect Windows Updates.

Offline mrwoof

  • Jr. Member
  • **
  • Join Date: Apr 2016
  • Posts: 99
  • Location: Dublin
  • Karma: 1
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #4 on: April 28, 2016, 07:44:48 am »
Well Boggin, The readiness tool "Windows6.1-KB947821-v34-x86" came in at 233.5 megs. I ran it for a few hours as it was searching for updates, nada!
 I ran the repair twice in safe mode & the open phase gave the all clear in the 3 scans. I attch logs generated, I assume the two logs "28.04.2016_xxx" give results for both runs. You can view the full folder if you have the time in the links below. Easier than a string of .txt files.

https://www.dropbox.com/sh/oq4k62a5uylasfb/AAAtziUfAOkth9EYKW9ZJr-Da?dl=0
https://www.dropbox.com/sh/ie6tospo9irbao8/AACWMQFy4cRk9xXsvPhOdbZYa?dl=0
https://www.dropbox.com/s/nhaseie77b9ihhl/chkdsk_full_log.txt?dl=0

So I'l run the update again and see if there is any change in behavior.
A curious issue indeed...

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #5 on: April 28, 2016, 08:37:41 am »
Your first link returned Preview Failed but I was able to look at them in the second.

Because I'm not sure what the Access Denied means in those error logs, I've emailed Shane to have a look at them - just hope he has time to do so.

Offline mrwoof

  • Jr. Member
  • **
  • Join Date: Apr 2016
  • Posts: 99
  • Location: Dublin
  • Karma: 1
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #6 on: April 28, 2016, 09:14:40 am »
Possibly another piece of the jigsaw, I attch a list of the missing updates detected with Belarc. When checked against the list of installed updates I posted earlier we may see the integrity of the sequence ? I know I'm reaching here!
I downloaded the updates from MS and on installing them it riggers "searching for updates" dialog box. So the issue covers both detection & install of these stand alone KBs.

Onward...

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #7 on: April 28, 2016, 09:32:50 am »
So when you reregistered those files, are those the ones in Step 5 of this MS article ?

https://support.microsoft.com/en-gb/kb/971058

Offline mrwoof

  • Jr. Member
  • **
  • Join Date: Apr 2016
  • Posts: 99
  • Location: Dublin
  • Karma: 1
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #8 on: April 28, 2016, 09:48:24 am »
i believe so, I used the "fix". Ran Windows update diagnostic.diagcab which detected issues, (see attch result 1 & result 2) which flagged an error RC_DataStore code 0X800F081F.

« Last Edit: April 28, 2016, 09:52:26 am by mrwoof »

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #9 on: April 28, 2016, 09:53:30 am »
Use the Fix it button and then choose the aggressive mode - will be quicker than using the cmd prompt and then reboot before trying the updates again.

I think that Fix it is supposed to reset the RC Data Store.

Offline mrwoof

  • Jr. Member
  • **
  • Join Date: Apr 2016
  • Posts: 99
  • Location: Dublin
  • Karma: 1
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #10 on: April 28, 2016, 10:27:27 am »
Ran fix with same result as before. Can't find aggressive mode, just option to run for Win update or background intelligent transfer  service.Ran both.
win stand alone installer  after an hour; error 0x08024001e

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #11 on: April 28, 2016, 10:42:36 am »
I've been having another dig around for fix for the 0x800F081F error and it would seem that either SURT or a repair install are the only options.

http://windows.microsoft.com/en-us/windows7/windows-update-error-800f081f

Run SURT again then forget about it until it completes then see what it reports in the Checksur log as I've previously described.

I think you are going to have to have some patience on this.

Offline Julian

  • "Professional Googler"
  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jun 2015
  • Posts: 1325
  • Location: USA, New Mexico
  • Karma: 38
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #12 on: April 28, 2016, 11:09:09 am »
Huh I wonder it you need to reset bits I was reading through your log and i saw it pop up with missing qmgr.dat and im assuming since it could not find the catroot folder it was already deleted no worries there windows rebuilds that with the cryptographic service. Hmmmm have you done a prescan yet? That's the scan tool in option 2 it does not repair just checks. If you have missing files I would like to see that log.
Julian

Offline Julian

  • "Professional Googler"
  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jun 2015
  • Posts: 1325
  • Location: USA, New Mexico
  • Karma: 38
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #13 on: April 28, 2016, 11:15:11 am »
Shoot try running this and restart
Code: [Select]
net stop cryptsvc
esentutl /p
%systemroot%\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb
rmdir /s /q %systemroot%\system32\catroot2.old
md %systemroot%\system32\catroot2.old
xcopy %systemroot%\system32\catroot2 %systemroot%\system32\catroot2.old /s
del /f /q %systemroot%\system32\catroot2\*.*
net start cryptsvc
pause
Julian

Offline mrwoof

  • Jr. Member
  • **
  • Join Date: Apr 2016
  • Posts: 99
  • Location: Dublin
  • Karma: 1
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #14 on: April 28, 2016, 03:54:40 pm »
Nice one Julian ! Ran your code & then update which detected and installed a bunch of updates. I'm happy to delete the blunderbuss of failed "fix" solutions I had been polluting my system with before you & Boggin chimed in. Maybe you can post this event in "User submitted guide" section.
I'll post your elegant solution on another tech support forum, it might accelerate their learning curve :evil:
As we say here in Ireland "May your bed never be empty"
Both Max & I are now in a state of happiness.

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #15 on: April 28, 2016, 05:20:19 pm »
I'll echo that - Nice one Julian :)

Offline Julian

  • "Professional Googler"
  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jun 2015
  • Posts: 1325
  • Location: USA, New Mexico
  • Karma: 38
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #16 on: April 29, 2016, 05:35:34 am »
awwww max is so cute! i have an Alaskan malamute his name is keiko shhhh he does not know it's a girls name  :wink:

oh btw go ahead and select the first post hit modify then in the title put (solved) at the end
I'm so glad that helped you out i have to tell Shane about this thread so he can see if he want's to add this to the windows repair all in one in fact he is the one who showed me that command :wink:
Julian

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #17 on: April 29, 2016, 08:24:10 am »
You may want to let MS know as well Julian, because their only suggestion is to run the SURT and if that doesn't work then it's a repair install.

What does the "pause" bit do in that cmd ?
« Last Edit: April 29, 2016, 08:34:55 am by Boggin »

Offline mrwoof

  • Jr. Member
  • **
  • Join Date: Apr 2016
  • Posts: 99
  • Location: Dublin
  • Karma: 1
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #18 on: April 29, 2016, 11:37:54 am »
awwww max is so cute! i have an Alaskan malamute his name is keiko shhhh he does not know it's a girls name  :wink:

oh btw go ahead and select the first post hit modify then in the title put (solved) at the end
I'm so glad that helped you out i have to tell Shane about this thread so he can see if he want's to add this to the windows repair all in one in fact he is the one who showed me that command :wink:

Offline Julian

  • "Professional Googler"
  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jun 2015
  • Posts: 1325
  • Location: USA, New Mexico
  • Karma: 38
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #19 on: May 01, 2016, 05:53:34 pm »
@bboggin ive been so fascinated by Microsoft repair install that ive been up for days trying to replicate how they do it... 😒 I wish I can know their secret I don't think they released that info and they kept it a secret because its something that saves Ms a lot of issues....
Julian

Offline Julian

  • "Professional Googler"
  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jun 2015
  • Posts: 1325
  • Location: USA, New Mexico
  • Karma: 38
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #20 on: May 01, 2016, 06:23:24 pm »
a pause Gives time for the user to shutdown and save programs before restarting windows and also gives time for the services to restart and make the folders. But usually when I see the pause im like alright lets restart the beast up and see if she runs purring. Because when you reboot the computer that's when all the fiLes rebuilds.
Julian

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #21 on: May 02, 2016, 01:48:07 am »
a pause Gives time for the user to shutdown and save programs before restarting windows and also gives time for the services to restart and make the folders. But usually when I see the pause im like alright lets restart the beast up and see if she runs purring. Because when you reboot the computer that's when all the fiLes rebuilds.

So you would still need to exit the cmd window to shutdown, or does the pause do that or is it waiting for you to hit any key for it to proceed, rather than executing the batch file immediately - even though a reboot may be required for the batch file to effect ?

Offline Julian

  • "Professional Googler"
  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jun 2015
  • Posts: 1325
  • Location: USA, New Mexico
  • Karma: 38
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #22 on: May 02, 2016, 11:40:25 am »
Well when you see the pause you should be good to go to reboot so instead it can be changed from a pause to shutdown /r /t 00 if necessary. the pause just pauses the batch file ill have to ask Shane in further detail I mean he is the one who showed me this.  :cheesy:
Julian

Offline Boggin

  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Posts: 10182
  • Location: UK
  • Karma: 122
    • View Profile
Re: W 7 update issue_error RC_DataStore code 0X800F081F
« Reply #23 on: May 03, 2016, 03:48:06 am »
Okay.