Main Forum > General Computer Support
require help please two issues
xenon1nonex1:
her is the resolts of the sfc program hope you can work with it
Boggin:
I wasn't sure if it could do anything without the CBS log that a sfc /scannow produces, but worth a shot.
Did the chkdsk /f report it had repaired any files ?
If you want, you could copy & paste that into the reply box by going back into Event Viewer to view it and then click on Copy/Copy details as text in the lower right pane.
As for the replacement HDD, it's difficult to know what data has been corrupted/lost and what exactly you'll be creating a system image from, but as the screen is now all to hell, boot up into Safe Mode to see if you can create a system image and a Repair disk if you haven't already.
While I've never had to do this myself, this article gives a simple walk through and I think it's going to have to be a case of seeing what you have after replacing the HDD.
https://askleo.com/how_do_i_transfer_my_system_to_a_replacement_drive/
xenon1nonex1:
The UPnP Device Host service depends on the SSDP Discovery service which failed to start because of the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
error shown
Windows update could not be installed because of error 2147944018 "Another installation is already in progress. Complete that installation before proceeding with this install." (Command line: ""C:\Windows\SysWOW64\wusa.exe" "C:\Users\RareDVD\AppData\Local\Temp\Windows6.1-KB947821-v34-x64.msu" ")
Service 'WMPNetworkSvc' did not start correctly because CoCreateInstance(CLSID_UPnPDeviceFinder) encountered error '0x80070422'. Verify that the UPnPHost service is running and that the UPnPHost component of Windows is installed properly.
Service 'WMPNetworkSvc' did not start correctly because CoCreateInstance(CLSID_UPnPDeviceFinder) encountered error '0x80070422'. Verify that the UPnPHost service is running and that the UPnPHost component of Windows is installed properly.
opps so many problems recorder
shame i cant re install w 7 agin without the problkems
truied so many thing but still no aero
Boggin:
Go Start - type services.msc and press enter.
Scroll down to SSDP - it should be showing as Started and Manual.
If it isn't showing as Started then click on it then on Start in the upper left pane.
If it is showing as Disabled then right click on it and select Properties then use the dropdown to change to Manual, hit the Start button - OK.
Close Services and reboot.
If it fails to start then go Start - type devmgmt.msc and press enter.
Click on View/Show hidden devices and scroll down to HTTP to see if it has a yellow alert next to it.
Are you using an OEM or custom built machine ?
xenon1nonex1:
thanks for that advice all done but no changes noticed
device manager clean'
ome machine
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version