Main Forum > General Computer Support
cloning or imaging which is best for restore in the even of hdd failure
jraju:
Hi, Samson, please see the error message and motherboard. I told you about hdd failure and replacement in my previous posts.The verification completed and every process is successful in laptop os and other backups using macrium reflect.
Please give solution to the error. I will try to repair or replace the dvd drive
jraju:
Hi, i enclosed the second try error. Now it is in 7%, hash value is incorrect?, the other error writngs are same
Samson:
Verification failure is caused by the fact that the data that is written to your backup drive cannot be read back reliably.
See this Knowledge base article http://knowledgebase.macrium.com/display/KNOW7/Understanding+Image+Verification+Failures
"Errors of this type are symptomatic of a computer system with a marginal hardware problem. The most likely suspect is your backup media - but memory and motherboard faults can also cause this issue."
First thing I'd try is plug the external drive into a different USB socket, try a socket at the rear of the PC.
I have never had a verification error so can offer little help.
Remember that any image that you do manage to create will be useless unless you have the ability to boot from resccue media.
jraju:
Hi, Samson, I will try another usb port.
I know the value of verification from your post, but what is hash is incorrect. It is the same program , mac ref that is writing the image from the one from computer in its own form. In laptop, i did not have this problem. So, i will try verify and then only try to check with rescue disk.
Glad that you never experienced this error.
The image creation is 100 percent success, but the process of verify is having problem.
Samson:
--- Quote from: jraju on July 21, 2017, 09:54:40 pm ---Hi, Samson, I will try another usb port.
--- End quote ---
Be sure to try one at the rear, that connects directly to the motherboard.
--- Quote from: jraju on July 21, 2017, 09:54:40 pm --- but what is hash is incorrect. It is the same program , mac ref that is writing the image from the one from computer in its own form.
--- End quote ---
The article I linked to explains this.
Maybe best to ask here https://forum.macrium.com/Forum3.aspx
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version