Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - RocketNut

Pages: [1] 2
1
General Computer Support / Re: My Bad
« on: April 16, 2017, 09:43:15 am »
I don't have Windows 10 install disk. :cry: When I bought the machine it came with Win 7 then when when the free Win 10 came out I upgraded to it.

2
General Computer Support / Re: My Bad
« on: April 16, 2017, 08:18:38 am »
I don't remember the diagnostics I used. I contacted Dell an had me run the diagnostics. I think it used the F12 function during BIOS boot up. I took almost an hour to check every thing. It came up with no errors. Dell wants me to send the laptop to one of there repair centers. Which means they would replace the HD, losing my data, not to mention the cost quoted at $450. Again like I said the machine is 6 years old it's time to replace with latest an greatest machine.

Rocket Nut

3
General Computer Support / Re: My Bad
« on: April 15, 2017, 04:30:30 pm »
I think it is spinning up because it looks like it's trying to boot up. It boots until the windows icon appears and the working circle of dots appears, then the dots stop being displayed, only the windows icon shows, and just sits there with the hard drive light blinks at very slow rate. Also running diagnostic says did not find any thing wrong with the disk!!!

We will see when the new machine comes it and making this drive as a USB drive if I can recover any data. Keep your fingers crossed.

Rocket Nut

4
General Computer Support / Re: My Bad
« on: April 15, 2017, 09:55:21 am »
Using the drive in a USB enclosure to try to recover the data files is what I thinking of trying also. Since the lap top is about 6 Years old I have ordered a new machine (may be I can sell it on Ebay for parts to recover some of the cost towards the new machine). I will really miss the 18" screen of my old machine, I could only find 17" machines.

Your right  hiring recovery specialist company is extremely expensive, an WAY outside my budget/income.

Rocket Nut

5
General Computer Support / My Bad
« on: April 14, 2017, 05:35:02 pm »
I dropped  :shy: :shy: :shy: :shy: :shy: my Alien 18 laptop and now it will not boot up. So is it possible to replace the HHD with a SSD with Windows 10 OS installed to get it to boot up. Then is there a way I can connect the old drive (as drive other then C, possible drive F) so I can recover my data files?

Thanks

Rocket Nut

6
Everything Else / Laptop Screen Cleaner
« on: October 13, 2014, 03:57:44 pm »
I have a Acer Aspire 70 Sb416, and wonderiing what the best way to clean the screen with out harming it? I have tried lens cleaning with has a achoo solution, and it does not cleaar it very well. Any suggestions?


7
Everything Else / Re: Can not load latest vesion.
« on: August 18, 2014, 05:36:50 pm »
Solved
It was my mistake sorry for the trouble.
RocketNut

8
Everything Else / Re: Can not load latest vesion.
« on: August 18, 2014, 01:41:33 pm »
Extract them where to?

9
Everything Else / Can not load latest vesion.
« on: August 18, 2014, 04:10:42 am »
I have down loaded the latest version, but can not get it to install. I tried to run Run_Windows.exe, but ican t not find the file_list.txt (I can see in the unzip files).
RocketNut

10
General Computer Support / Re: WMI Repair Tool
« on: April 24, 2014, 02:29:31 pm »
We are almost I'm in Salt Lake City Utah.  :cheesy:

You not accepting PM is very understanding :smiley:

I used the USB to do a back up, meaning I don't have the ISO any more. Because I was going to do a clean reinstall, that's when bottom fell out. As for my hard drive I will go ahead and replace it. I am also going to replace the memory just to be on the safe side.

11
General Computer Support / Re: WMI Repair Tool
« on: April 23, 2014, 02:17:55 pm »
Shane:
J tried to PM you this message but it said I was blocked (understandable)
Is there any way you could send the  Windows 7 Home Prem. OS install on a bootable USB Drive. I am using a friends machine to send you this message. Shabe please PM me so I can give my phone number about the price and my address.  Right my machine OS will not start. The resone I need it on a flash drive instead of a CD is my CD is not working at all.
RocketNut

12
General Computer Support / Re: WMI Repair Tool
« on: April 22, 2014, 03:53:22 pm »
OK I got it to run. I do not think if there was any errors, I did not see the last test because it restarted before I could read it. It did cuase some thing because I got the blue screen of death, with a message of "contact your tec support or adm for fewer assistance" It does not reboot and I cycle the power to reboot. What does this message mean  :sad: Before when the blue screen came up it would do a dump to log file (I think) then reboot.

13
General Computer Support / Re: WMI Repair Tool
« on: April 22, 2014, 10:49:11 am »
I tried your check disk but an error, Please see the attached screen shot. I don't know how make me the adm.

14
General Computer Support / Re: WMI Repair Tool
« on: April 21, 2014, 05:01:10 pm »
My CD is not work so I could not make a working copy of your memtest. I used MEMTEST86+, it make USB flash bootable. I ran the test over night with out any errors.

15
General Computer Support / Re: Drives and chkdsk errors
« on: April 18, 2014, 09:42:56 am »
 :shy: sorry  :shy:

16
General Computer Support / USB Drive Problem
« on: April 18, 2014, 09:41:58 am »
I to have a drive problem. I create a volume on my USB external drive so I could run a repair install (unsuccessful even after using a flash drive) using the new volume. Now I can not get the drive to work. The drive keeps resetting and windows says that the volume I (my new volume) needs to be formatted. When I click on the ok button, it can not find it because the drive has restarted. I can see the main volume and even long enough to start a copy of a folder I need off it. The copy starts then crashes because the drive has rested. I can reformat the entire drive after I can get this importunate folder saved.
I was wondering is there a way I can save this folder then erase the bad volume or reformat the drive with out losing this fold?

RocketNut

17
General Computer Support / Re: WMI Repair Tool
« on: April 18, 2014, 09:27:36 am »
It's not the down load,the download work's with out errors. I'm using a download manager (IMG Download Manager. The errors comes when the repair install start copying files. It get up to about 10% the error pops up.  Yes I erased/formatted  the flash drive on each try.

RocketNut

18
General Computer Support / Re: Drives and chkdsk errors
« on: April 18, 2014, 09:19:34 am »
I to have a drive problem. I create a volume on my USB external drive so I could run a repair install (unsuccessful even after using a flash drive) using the new volume. Now I can not get the drive to work. The drive keeps resetting and windows says that the volume I (my new volume) needs to be formatted. When I click on the ok button, it can not find it because the drive has restarted. I can see the main volume and even long enough to start a copy of a folder I need off it. The copy starts then crashes because the drive has rested. I can reformat the entire drive after I can get this importunate folder saved.
I was wondering is there a way I can save this folder then erase the bad volume or reformat the drive with out losing this fold?

RocketNut

19
General Computer Support / Re: WMI Repair Tool
« on: April 17, 2014, 02:47:15 pm »
Walking out to flag pole with white flag. I guess I am going have use this this version and hope for the best.
4 downloads of ISO file with out success (ERROR 0x80070241). I think it's WFI connection. I'm using a USB dongle for my internet connection, and repair will not run with out it..

20
General Computer Support / Re: WMI Repair Tool
« on: April 15, 2014, 02:53:39 pm »
I'm going to rerun the repair install right aftern I post this. I was doing to make a screen capture video to show the errors I was seeing. As I was making this video I noticed a lot of file denied access of my anti virus (AVAST), even after I deactivated it. So I uninstalled it an rerun your program, there was no errors!!!!! :confused: :confused:  So I will rerun the repair install (before reinstalling AVAST) to see what happens.

I will kept you informed on what happens.

RocketNut

21
General Computer Support / Re: WMI Repair Tool
« on: April 15, 2014, 12:05:22 pm »
After I posted the screen shot I compared yours with mine and find one that didn't match please see screen shot..

22
General Computer Support / Re: WMI Repair Tool
« on: April 15, 2014, 12:00:52 pm »
 :smiley:

23
General Computer Support / Re: Task Bar Icons
« on: April 15, 2014, 11:48:35 am »
I thought you might be interested on what I'm working on. You can see all parts there is and why it helps to Aero Peek on.

24
General Computer Support / Re: WMI Repair Tool
« on: April 15, 2014, 11:38:40 am »
OK here is the screen shot you asked for. :smiley:

25
General Computer Support / Re: WMI Repair Tool
« on: April 15, 2014, 10:24:36 am »
The attached screen shots are of Program Files and Performance Info.
 As for what test that came up with errors, Was in the first 2 test (using default settings). Is there a log some where I could send you? The errors flash by so fast I could read, the only thing I could read was the number of error.

Pages: [1] 2