Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ChuckR

Pages: [1]
1
General Computer Support / Re: Register Question
« on: July 01, 2018, 01:58:41 AM »
The job is done
THANKS

Have a great weekend

2
General Computer Support / Re: Register Question
« on: June 30, 2018, 08:51:40 PM »
I did have KB2952664 installed, but have now removed it also.  Somehow I or Something removed I.E. from those locations.  The application still existed on the C: drive just no pointers.  That is why I tried a reinstall to rebuild what was missing.  It worked.
Tweaking.com seemed to clear up what else was missing.

3
General Computer Support / Re: Register Question
« on: June 30, 2018, 10:09:28 AM »
Thank you for all the assistance.  I was able to Install I.E. and my Quicken works again.  Installing Net Framework 4.6.1 seems to have re-installed Silverlight.  I also removed all Windows Updates for 2018. I am using the information in AskWoody to determine what Updates are safe.  There aren't many.

4
General Computer Support / Re: Register Question
« on: June 23, 2018, 09:45:57 AM »
I don't remember how I cleaned them up, but they weren't used so I cleaned them out for the space.  I know it wasn't much, but every little bit helps on a SSD.
I don't have SCFix.exe.  Where can I get it?  What does it do in relation to SCF?

5
General Computer Support / Re: Register Question
« on: June 23, 2018, 09:15:16 AM »
GREAT RESPONSE.  I looked through the .txt and everything it could not repair were the samples Windows installs and I removed for video, music, etc.
Thanks again.

Will that work if I can't get to the CBS.LOG?

6
General Computer Support / Re: Register Question
« on: June 23, 2018, 08:22:31 AM »
New conditionWorking on an issue with Quicken and Windows 7 I needed to install Net Framework 4.6.1.  During a follow-on examination of the system I discovered Microsoft Silverlight is now in c:\Mats\...\Program Files(x86) with a date of 6/16/2018. Could this be related to installing .NET Framework 4.6.1?
I also cannot get into a CBS log the was created 6/22/2018 and is still active. SFC \Scannow said it found some files it could not fix and I am trying to see what they were?
When I have some time I will run Tweaking.com and see if it can fix them.

7
General Computer Support / Re: Register Question
« on: June 18, 2018, 10:57:06 AM »
I was pointed to the following application and it worked perfectly, at least so far.  Cleaned up the Register and cleaned up the "Programs and Features' entry that had identified the issue.

MicrosoftProgram_Install_and_Uninstall.meta.diagcab

8
General Computer Support / Register Question [SOLVED]
« on: June 16, 2018, 08:50:49 AM »
A few years ago I managed to install Silverlight and Adobe Flash Player 11 Activex( I now have 29).  Neither one of them point to a file on C:. Recently I ran Wise Registry Cleaner and CCleaner(which I have used for years) and System Essentials and Tweaking.com.  I expected one of them to clean up the Register as the programs CAN'T be removed from the control panel.  I know that I could use Regedit and find the entries and delete from there, but I wonder why there is no program the realizes the entries don't point to an application.

9
General Computer Support / Re: Originally Windows 7 Update Problem
« on: June 18, 2017, 09:26:59 PM »
Are they for Windows 10?   The URL you listed references that.

10
General Computer Support / Re: Originally Windows 7 Update Problem
« on: June 18, 2017, 12:56:42 PM »
Thanks for the information and support.  I don't expect to do any more as most things are running.  It  just the Monthly Rollups.

11
General Computer Support / Re: Originally Windows 7 Update Problem
« on: June 18, 2017, 09:46:53 AM »
Please Clarify
"What I meant by that was that the Cat and Mum file replacement section has been closed."

I never got into the innards of a very useful tool.
 

12
General Computer Support / Re: Originally Windows 7 Update Problem
« on: June 17, 2017, 09:20:00 PM »
Thanks for the response.  Sysnative cleaned up some of the files, but gave up.  We used SFCFix with files they supplied which worked.  There were just to many.  We used SFC \Scannow, Checksur(,Windows6.1-KB947821-v34-x64.msu), cleaned out DataStore, Tried DISM /Online /Cleanup-Image with /Scanhealth and /Checkhealth and /RestoreHealth but it won't run in Windows 7 Professional 64bit.  I also Ran Tweaking.com which did some cleanup as I recall. 
What did you mean with  "No - that repair section has since been closed"

I had the machine built 5 years ago and they used an OEM O.S.

13
General Computer Support / Originally Windows 7 Update Problem
« on: June 17, 2017, 10:10:39 AM »
I have been working for Months to allow Rollups to install. I have to go to the Security portion and install it.
I have been working with SysNative and we have been doing a lot of cleanup and building.
They have given up because of the number of missing System files. The following information from CHECKSUR.
Found 4391 errors
  CSI Manifest Missing Total count: 1670
  CSI C Mark Deployment Missing Total count: 8
  CSI Payload File Missing Total count: 2711
  CBS MUM Corrupt Total count: 2
TWEAKING.COM HAS helped in the past.  Can it do anything for the above issues?
Thanks

14
Everything Else / Re: Windows Rollup(Oct,Nov) 7 Professional 64bit
« on: December 01, 2016, 10:43:40 AM »
It did fix 3 of 4 issues.  One fix had an error code of 0x80070490.  I will look into this when I have time.
Thanks again for the help.
Have a good day.

15
Everything Else / Re: Windows Rollup(Oct,Nov) 7 Professional 64bit
« on: December 01, 2016, 09:25:37 AM »
As mentioned, I tried 3197868 on 11/30/2016 and it Reverted.  I looked into the CBS Log and wow I found the following which only a small portion of these errors.
Session: 30558846_681764211 initialized by client WindowsUpdateAgent.
2016-11-29 12:21:25, Info                  CBS    Failed to internally open package. [HRESULT = 0x800f0805 - CBS_E_INVALID_PACKAGE]
2016-11-29 12:21:25, Info                  CBS    Session: 30558846_681774212 initialized by client WindowsUpdateAgent.
2016-11-29 12:21:25, Info                  CBS    Failed to internally open package. [HRESULT = 0x800f0805 - CBS_E_INVALID_PACKAGE]

Many Session items did seem to initialize.
Where would ALL these come from?
I can't believe they are included in KB3197868

Since I found them I re-ran Tweaking.com.
Have not tried KB3197868 since then.

16
Everything Else / Re: Windows Rollup(Oct,Nov) 7 Professional 64bit
« on: November 30, 2016, 10:37:40 AM »
The usual reply is SEND MONEY for help.

17
Everything Else / Re: Windows Rollup(Oct,Nov) 7 Professional 64bit
« on: November 30, 2016, 09:12:01 AM »
Device Manager shows ATI 0, ATI 1, Standard Dual Channel PCI IDE Controller.  All of them have 3 entries. Both Controllers and the SSD(which shows as an ATA Device) have the latest drivers, which go back to 2006.

18
Everything Else / Re: Windows Rollup(Oct,Nov) 7 Professional 64bit
« on: November 29, 2016, 08:52:27 PM »
I did find the following in a CBSPERSIST.LOG for the today when I ran kb3197868.
TrustedInstaller service starts successfully.
2016-11-24 08:37:14, Info                  CBS    SQM: Initializing online with Windows opt-in: False
2016-11-24 08:37:14, Info                  CBS    SQM: Cleaning up report files older than 10 days.
2016-11-24 08:37:14, Info                  CBS    SQM: Requesting upload of all unsent reports.
2016-11-24 08:37:14, Info                  CBS    SQM: Failed to start upload with file pattern: C:\Windows\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT = 0x80004005 - E_FAIL]
2016-11-24 08:37:14, Info                  CBS    SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL]

2016-11-24 08:37:14, Info                  CBS    SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_all.sqm, flags: 0x6
2016-11-24 08:37:14, Info                  CBS    SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL][/size]

19
Everything Else / Re: Windows Rollup(Oct,Nov) 7 Professional 64bit
« on: November 29, 2016, 12:53:36 PM »
I tried the install with everything turned off.  I believe I once tried it under Administrator with no luck.

20
Everything Else / Re: Windows Rollup(Oct,Nov) 7 Professional 64bit
« on: November 29, 2016, 09:13:29 AM »
Tried and got the same error.  With kb3187867 Security installed my machine should be safe, but what is the cause of the error and revert with 3197868? 

21
Everything Else / Re: Windows Rollup(Oct,Nov) 7 Professional 64bit
« on: November 29, 2016, 08:32:22 AM »
Great access method.  Found the following in a previous attempt.
 
Windows failed to install the following update with error 0x80004005: November, 2016 Security Monthly Quality Rollup for Windows 7 for x64-based Systems (KB3197868).

I am afraid this is the same error that has been floating around the forums.  I will still try again later today.
I have run SFC, Windows Recovery/Fixit, etc.  Maybe one of them cleaned up whatever causes the error. 
I will run Update and write and submit results.
Thanks

22
Everything Else / Re: Windows Rollup(Oct,Nov) 7 Professional 64bit
« on: November 28, 2016, 03:09:14 PM »
With all the cleanup I have done lately, VIEW UPDATE HISTORY is empty.  I will try and run 3197868 and see what it shows.

23
Everything Else / Windows Rollup(Oct,Nov) 7 Professional 64bit
« on: November 28, 2016, 11:01:23 AM »
I, and many others, have been chasing these rollups which end up Reverting the changes.  I did manage to install a piece of KB3197868 which was the security KB3197867.  I have run Microsoft's cleanup programs. I have run CCleaner, Malwarbytes, Tweaking AIO free.  I am having trouble downloading the Nov update to try again.  Have the Tweaking folks run into this with a solution?

Pages: [1]