Topics

1

General Computer Support / Ethernet Not Recognized Immediately on Boot Up

« on: July 07, 2021, 08:04:07 pm »

Guys,

I have an Ethernet connection on my PC with no wifi card. I am hard wired to the router... My issue is... If I restart my PC then once in the windows login screen... Windows does not recognize Ethernet or internet connection until like 2-3 mins later.... Very delayed...

Is there a way to fix this?

Thanks in advance,
Layne

2

General Computer Support / Keyboard does not work in Bios

« on: August 25, 2016, 04:00:07 pm »

Hello all,

My keyboard will no longer in the bios... It works once machine is booted into Windows.

Now... Usb on the front work in bios... USB ports attached to case (corsair c70)

My motherboard is asus rampage iv black edition which I am on my second because I rma the last one because of this usb issue.

Please help if you can.

Thanks,
Layne

3

General Computer Support / USB ports on mobo not working in bios

« on: July 01, 2016, 05:44:11 pm »

Hello guys,

You guys always own it when I have an issue. There is no where else I can find info that I have not thought of or those quite smarter than me. =-)

Anyhow, the problem is in the in the subject line...

When I start my PC... No keyboard detected in the bios.... Everything is fine once loaded into Windows.

The USB ports on the front of my PC that were supplied with my case.... They work in the bios.

Any idea?

Thanks in advance for the help,
Layne

4

General Computer Support / Windows 10 Ethernet Issue

« on: April 17, 2016, 03:07:20 pm »

Hello all,

It has been a while but I have singed your praises to everyone I know since I last posted on here and purchased the tweaking.com pro edition.

I am having issue with Windows 10 and my Intel 82579v Gigabit Ethernet connection.

Windows 10 is saying the Ethernet is disconnected. However, if I disable my wifi adapter I have an Internet connection via Ethernet. Also, if I go to status it says ipv4 and IPv6 is disconnected but bytes are coming and out. When I run a speed test on the just the Ethernet I am getting 65mbs dl and 5mbps ul.

This would not bother me other than the fact that Windows applications think the Ethernet is disconnected and I cannot use the Xbox app and sometimes I cannot get Windows updates.

I have updated to the latest driver.

I have searched multiple forums and Google with no solution.

If anyone out there can help please help!

Thanks again,
Layne

5

General Computer Support / 1234F Message On Win7 Boot

« on: October 31, 2015, 09:45:32 pm »

Hello all,

I am getting a 1234F dos message when I try to boot Windows 7.

How can I fix this? I do not want to format because I cannot afford to lose all of the pictures and videos on the drive?

Thanks in advance,
Layne

6

General Computer Support / Windows 10 - Network and Sharing Center Does Not Load

« on: August 04, 2015, 09:33:56 pm »

Hello all,

If I go into classic control panel and click on Network and Sharing Center... it completely freezes the control panel window and does not open... Anyone else experiencing this?

If so, got a fix?

Thanks,
Layne

7

General Computer Support / Periodical PC Freezing

« on: August 03, 2015, 07:25:03 am »

Hello all,

I am getting some freezes from time to time. When it freezes...it is either temporary or permanent and requires a power down and power on.

Scenario 1:
When playing a game.... the game freezes yet the pc is still responsive... If I hit CTRL+ALT+DEL it will become unfrozen shortly afterwards...the picture blinks and the game is responsive.

Scenario 2:
Right after a restart if I begin to activate a program or access file explorer...The PC freezes permanently requiring a power off/on.

Please help...So annoying to have these little instabilities....

Thanks,
Layne

8

General Computer Support / ( SOLVED) Network Shares Missing (Windows 10)

« on: July 31, 2015, 11:20:17 pm »

Hello all,

I managed to get Windows 10 Pro x64 installed tonight. I love it so far.

The only issue I have ran into is that all of my network drives that are plugged into my router are now missing and I am unable to map them?

I have a Netgear Nighthawk R8000 and I am plugging a powered hub into... I had them  all mapped in Win 8.1 Pro but unable to connect or map now?

Any help is much appreciated... Thanks guys!

-Layne

9

General Computer Support / (SOLVED) Issues installing Windows 10

« on: July 31, 2015, 05:53:44 am »

Hello,

I am having issues installing Windows 10 Pro. I currently have Windows 8.1 Pro x64.

Windows update fails the install so I had to manually download the Media Creation Tool from Microsoft.

The first time I used just the software itself to install.... It was able to make it to the point of restarting the PC...Then it goes into a black screen...I then have to power off my pc.
It restarts then hangs at 32% and 6% installing drivers. I left this for 8 hours with no movement.... So I had to power off and when it restores windows 8.1 pro... I get ALOT of freezing and then after rebooting and safe mode.... turning off services and restarting in a clean boot... The freezing goes away....

So I tried installing from a USB drive.... I have the same problem as before....

Does anyone know a fix for this?

Has anyone updated from 8.1 Pro x64 and is the performance worth it? I am a gamer and I also record music professionally.

Thanks,
Layne

10

General Computer Support / (SOLVED) Shortcuts Menu Delay

« on: July 30, 2015, 10:45:06 am »

Hello all,

I am getting some delays when trying to open menus from a shortcut i placed on my taskbar. I have attached a video for reference.

Does anyone know a registry tweak to make this instant like the other folders on the menu?

Thank you,
Layne

11

General Computer Support / (SOLVED) Issues with SFC /Scannow... DISM not working

« on: July 30, 2015, 09:24:20 am »

Hello,

I recently just purchased your pro version. I love what you are doing and there definitely was a need for a program such as this.

Anyhow, I am having issues with some system freezing, instability...etc etc... I ran sfc /scannow and resulted in corrupted files... I then ran DISM restore heath (the actual command) inside CMD and it says it repaired....ran sfc again...corrupted files...this happens over and over again... no repair....

The issue is with the files utc.app.jason and telemetry (not the full name) but it cannot repair it for some reason. It is driving me nuts....

I have attached my CBS log.

I cannot install Windows 10 update either... it hangs at 32%... i have to power down and then start backup...it restores to prev win 8.1 pro os.

Here are my specs:
Case: Corsair Vengeance Series C70
Motherboard: Asus Rampage IV Black Edition
CPU: i7-4930k
CPU Cooler: Corsair H100i Water/Liquid Cooler
Ram: 16GB Corsair Vengeance Pro 1866 (CMY16GX3M2A1866C9R)
GPU: 2x EVGA GTX 780 Ti Classified (SLI)
PSU: Corsair AX1200i
HD: Samsung 840 Pro 256GB (OS)
2x WD Velociraptor 500GB (RAID)
OS: Windows 8.1 Pro (x64)
Fans: 6x Corsair AF120 Performance Edition Fans

Also, will your registry repair overwrite my registry tweaks such as menushowdelay, mousehover,  etc. ?

Thanks in advance for the help,
Layne

12

Tweaking.com Support & Help / Trying to install .Net Framework 4.0 Error 643 in Windows Update

« on: January 16, 2012, 08:16:07 am »

Shane,

I tryed your latest version of Tweaking to try and fix my issue. I keep getting error 643 in windows update. Also, when I make another user acct and switch user it shows the other user as "other" and when I login to that account by typing Username and PW. It says explorer.exe cant function when I try to access "my computer".

I am having serious issues and I do not want to format and reinstall due to the fact I have so much time and work invested into this install.

Do you have any suggestions on what I could do? Thank you!

-Layne