Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - layne81

Pages: 1 2 [3] 4
General Computer Support / Re: Issues installing Windows 10
« on: July 31, 2015, 07:31:57 AM »
I see that Nvidia Experience has a driver download for compatibilty with Windows 10.... but I have yet to download that.

I am working with my old drivers. I have 353.30 installed and the new driver available is 353.62. I dunno...

Maybe trying downloading the new driver?

It is just so painful if that windows 10 installation goes south.... It make everything unstable.... System freezes...the whole nine yards.....

8.1 pro is blazing right now.... I had to mess it up  :confused:

If 10 has better performance like they boast... I see it being worth it... I just canttttt even install it.

ok this is a different tool than i used before...

It is prompting to instert my Windows 8.1 disc which I cannot at the moment because I am in my office at work. I will try this solution once I am back home.

Thanks for link!

I actually tried that SFCtool before....

I will try again and see if it is able to fix this go round.

General Computer Support / Re: Shortcuts Menu Delay (SOLVED)
« on: July 31, 2015, 06:24:04 AM »
After running Windows Repair in safe mode and using the tweaks in Pro version.

My menu delay is gone and is buttery smooth. I have attached a video to compare.

General Computer Support / Re: Issues installing Windows 10
« on: July 31, 2015, 06:19:13 AM »
Yes I am.

I am running 2x GTX 780 TI Classifieds in SLI.

ok I erased the CBSLOG paste and attached sfcdetails.txt in my previous post.

I just uninstalled KB3068708 and ran SFC /SCANNOW again to see if it made a difference and the corrupt files still remain.  :teeth:

General Computer Support / Re: Issues installing Windows 10
« on: July 31, 2015, 06:03:58 AM »
0xC1900101 - 0x30018
The installation failed in the FIRST_BOOT phase with an error during SYSPREP operation.

sfcdetails.txt attached.

General Computer Support / (SOLVED) Issues installing Windows 10
« on: July 31, 2015, 05:53:44 AM »

I am having issues installing Windows 10 Pro. I currently have Windows 8.1 Pro x64.

Windows update fails the install so I had to manually download the Media Creation Tool from Microsoft.

The first time I used just the software itself to install.... It was able to make it to the point of restarting the PC...Then it goes into a black screen...I then have to power off my pc.
It restarts then hangs at 32% and 6% installing drivers. I left this for 8 hours with no movement.... So I had to power off and when it restores windows 8.1 pro... I get ALOT of freezing and then after rebooting and safe mode.... turning off services and restarting in a clean boot... The freezing goes away....

So I tried installing from a USB drive.... I have the same problem as before....

Does anyone know a fix for this?

Has anyone updated from 8.1 Pro x64 and is the performance worth it? I am a gamer and I also record music professionally.



I ran the windows repair in safe mode last night twice and sfc /scannow is still returning corrupted files for and telemetry....

One thing I noticed is.... The CBS.log says that does not match So...looking into it.... I noticed that there is 2 copies of telemetry and

One is copy is located in the Temp folder under Winsxs.... I believe this is what is causing the issues....

Would it mess anything up to clear out that Temp folder in Winsxs and see if that rectifies the issue?

Thanks again for the help,

Ok I ran sfc /scannow in elevated command prompt and i am still showing corrupt files.  :cry:

Ok here is the results:

Checking file system on C:
The type of the file system is NTFS.

A disk check has been scheduled.
Windows will now check the disk.                         

Stage 1: Examining basic file system structure ...
  1637632 file records processed.                                                         File verification completed.
  8444 large file records processed.                                      0 bad file records processed.                                     
Stage 2: Examining file name linkage ...
  3141318 index entries processed.                                                        Index verification completed.
  0 unindexed files scanned.                                           0 unindexed files recovered.                                       
Stage 3: Examining security descriptors ...
Cleaning up 695 unused index entries from index $SII of file 0x9.
Cleaning up 695 unused index entries from index $SDH of file 0x9.
Cleaning up 695 unused security descriptors.
Security descriptor verification completed.
  751844 data files processed.                                            CHKDSK is verifying Usn Journal...
  269291648 USN bytes processed.                                                            Usn Journal verification completed.

Stage 4: Looking for bad clusters in user file data ...
  1637616 files processed.                                                                File data verification completed.

Stage 5: Looking for bad, free clusters ...
  21516240 free clusters processed.                                                        Free space verification is complete.

Windows has scanned the file system and found no problems.
No further action is required.

 249518407 KB total disk space.
 160581000 KB in 782537 files.
    897204 KB in 751845 indexes.
         0 KB in bad sectors.
   1975243 KB in use by the system.
     65536 KB occupied by the log file.
  86064960 KB available on disk.

      4096 bytes in each allocation unit.
  62379601 total allocation units on disk.
  21516240 allocation units available on disk.

Internal Info:
00 fd 18 00 7f 69 17 00 22 01 2a 00 00 00 00 00  .....i..".*.....
10 99 0a 00 49 00 00 00 00 00 00 00 00 00 00 00  ....I...........

Windows has finished checking your disk.
Please wait while your computer restarts.

General Computer Support / (SOLVED) Shortcuts Menu Delay
« on: July 30, 2015, 10:45:06 AM »
Hello all,

I am getting some delays when trying to open menus from a shortcut i placed on my taskbar. I have attached a video for reference.

Does anyone know a registry tweak to make this instant like the other folders on the menu?

Thank you,


I recently just purchased your pro version. I love what you are doing and there definitely was a need for a program such as this.

Anyhow, I am having issues with some system freezing, instability...etc etc... I ran sfc /scannow and resulted in corrupted files... I then ran DISM restore heath (the actual command) inside CMD and it says it repaired....ran sfc again...corrupted files...this happens over and over again... no repair....

The issue is with the files and telemetry (not the full name) but it cannot repair it for some reason. It is driving me nuts....

I have attached my CBS log.

I cannot install Windows 10 update either... it hangs at 32%... i have to power down and then start restores to prev win 8.1 pro os.

Here are my specs:
Case: Corsair Vengeance Series C70
Motherboard: Asus Rampage IV Black Edition
CPU: i7-4930k
CPU Cooler: Corsair H100i Water/Liquid Cooler
Ram: 16GB Corsair Vengeance Pro 1866 (CMY16GX3M2A1866C9R)
GPU: 2x EVGA GTX 780 Ti Classified (SLI)
PSU: Corsair AX1200i
HD: Samsung 840 Pro 256GB (OS)
2x WD Velociraptor 500GB (RAID)
OS: Windows 8.1 Pro (x64)
Fans: 6x Corsair AF120 Performance Edition Fans

Also, will your registry repair overwrite my registry tweaks such as menushowdelay, mousehover,  etc. ?

Thanks in advance for the help,

no i was opening the iso in poweriso and then burning through poweriso (which uses nero)

I fixed the issue last night. I had to mount the iso with power iso (virtual drive). That was the only way I could install it correctly.

So I want to make a disc of that version I used and I cannot burn a disc or make a copy that has auto install or auto start included... If I burn a disc I have to browse files on disc to find setup.exe.
Do you know how I can burn an exact copy of the iso so it would be boot properly on disc?

Thanks again for you help!

I got the same error message as the pic I posted above when I tried to install using the new disc!


What gives? Hahahahahaha

hmm I don't know where I am going to be able to obtain that hahaha

Yes Windows Home 32 and 64 SP1 and Windows Ultimate 32 and 64 SP1

No I downloaded a disc but I did however purchase a large enough usb drive to do the slipstream operation... Think I should give that a go?

Yea same error when I just tried it =-\

I believe I did but I will try again.

Do you think its possible to go to home 64 and back to ultimate 64?

Correct! And this is the message I am receiving...

Never had this much of an issue repairing Windows... =-\

Pages: 1 2 [3] 4