Messages

26

General Computer Support / Re: Windows 7 "works" but can not create folder or rename files

« on: October 13, 2019, 12:40:02 pm »

Hi - Scannow found no errors.  I tried to use findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log > %userprofile%\Desktop\sfcdetails.txt --- but I got message can not find command FINKSTR.

However I went to the windows log ara and attached the file to this post.

I still get message that I am unable to creat text file on C drive.

I was able to creat a test file with copy con testing.txt CTRLz.
When I did dir testing.txt the file was there.

But if I try to create a file with NEW, the module needed is not there.

Awaiting further instrucitons.  And, thanks for your help.

27

General Computer Support / Re: Windows 7 "works" but can not create folder or rename files

« on: October 13, 2019, 06:53:00 am »

Hi Tom.  OK I am in safe mode now and runing the scan again.  But, I do not understand what you mean by "remove that".  I have not problem following your instructions even if time consuming.

28

General Computer Support / Re: Windows 7 "works" but can not create folder or rename files

« on: October 12, 2019, 04:44:33 pm »

Yes, I did.  Sorry I did not know.  Still going.

29

General Computer Support / Re: Windows 7 "works" but can not create folder or rename files

« on: October 12, 2019, 11:51:59 am »

Hi - FYI  "Take Ownership" has been runnning for some time.  I will wait until done before rebooting and running scannow in safe mode.

30

General Computer Support / Re: Windows 7 "works" but can not create folder or rename files

« on: October 12, 2019, 07:58:24 am »

Hi Tom.  Thanks for your help.

OK, I feel like I need to explain that I could not reboot until today due to a process that I setupp last Monday that had to complete; It takes hours to setup and once interrupted I can not be sure that I have it setup again correctly.

The first thing I can tell you is that I can access my NAS drives; but still can not rename files on C or NAS.

But, I have rebooted.  I could not get the CBS log in the normal way that you suggested; I got "can not access"; also with XYplorer I could not get it.  But, with Ztree I was able to get it and copy it to one of my MAS drives.

I am attaching it to this post.

31

General Computer Support / Re: Windows 7 "works" but can not create folder or rename files

« on: October 09, 2019, 07:10:32 am »

Hi and thank.  I am going to reboot, but must wait until market processes are complete --- but Saturday.

32

General Computer Support / Re: Windows 7 "works" but can not create folder or rename files

« on: October 08, 2019, 07:03:04 am »

Hi and thanks.  I tried that
(findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log > %userprofile%\Desktop\sfcdetails.txt)
but I still received access denied.

33

General Computer Support / Re: Windows 7 "works" but can not create folder or rename files

« on: October 08, 2019, 06:16:35 am »

Hi - I did the scan and here are the results.  I can not reboot right now, but will report back here after I do.
Access is denied to the log so I can not post it --- maybe after reboot?

34

General Computer Support / Re: Windows 7 "works" but can not create folder or rename files

« on: October 07, 2019, 12:07:01 pm »

Hi - I created a new admin account but when I went to log on preparing the desktop took 30 minutes.  I logged back to my account and deleted the new admin account.  I also tried an old rarely used admin account and same thing; preparing desktop too a long time. 

I switched back to my "working" account OK.

Does this problem have to do with file ownershop, etc?   I see that the Tweaking tool has a section for deling with that, but I do not know what switches to set.

One more fact.  I can download files to my NAS and my C drive but can not create a text file or a folder on NAS or C drive.
I will await you reply.

35

General Computer Support / Windows 7 "works" but can not create folder or rename files

« on: October 06, 2019, 10:48:42 am »

Hi - No sure what cause this but I need to fix it.  I was just going to run Tweaking but realize I know nothing about which switches to check.

Background:  Story:  The other day my entire NT8 folder under Administor user disappeared.  If might have been right after a W7 update.

I did a install of Malware bytes, but after the restore the computer would only boot to a blank screen; I could move and see the mouse, but that is all excpet for the icon you installed whichmonitors CPU temperature.  No Task bar.  I trieed several types of rebooting:  last known config, etc.  Nothing changed anything.

Then, I remembered a note oI read f trying the safe mode.  I did that an got a desktop.  Then I rebooted and uninstalled Malware bytes and rebooted again normally and desktop came up, but the machine only fully worked in the normal Potye user (and the NT8 directory was restored!).  I don't care about NT8 anymoe; I just want to be able to rename files and create folders.

So, I am using it only as that user, BUT I can not rename any folders on C or any of the NAS.  I can create folders and files but no re-naming.

36

Tweaking.com Support & Help / Re: Windows 7 64 bit Ultimate - mouse or explorer.exe hands up system completely

« on: January 16, 2019, 02:18:34 pm »

Thanks, Boggin.  I found that the BIOS had an update in September, so I did that.  Video drivers the latest as far as I can tell.  Happened again at end of yesterday and again this afternoon.  Attached is Belarc and DirectX diagnostics.

37

Tweaking.com Support & Help / Re: Windows 7 64 bit Ultimate - mouse or explorer.exe hands up system completely

« on: January 14, 2019, 11:42:53 am »

Hi - OK at 13 44 today it happened again.
Attached are the event viewer notices; none of them happened at 13 44.

SEE ATTACHMENTS
NOTE ATTACHED 2019 01 14  a number of these from 04 28 am to 13 28 pm; note crash was at 13 44 pm
   (this mentiones Avast update had a problem; dunno y as I have a paid version; should I just junk it and go to malware bytes?)
NOTE ATTACHED 2019 01 14  this was at 11 37 am

When it happened, mouse and kb and cpu were frozen;  all monitors were on.
On reboot two of the AMD W7000 monitors did not come on; I went to screen resolution and they would not connect.
But, every time it has happened in the past there were no problems at all with the monitors coming on.

38

Tweaking.com Support & Help / Re: Windows 7 64 bit Ultimate - mouse or explorer.exe hands up system completely

« on: January 12, 2019, 02:56:57 pm »

Thanks Boggin,

Well, I was very worried about the SSD when I first installed it, but since then (maybe 2 + months) I have not had any problems with it and system seems to be OK.  I have hear that performance can be increased with Magician, but for now I will just leave well enough alone.  I am putting in another idential system in the next month and will read all about how to install based on you link for that system.

Re mouse or explorer.exe hanging up system, I guess I have to wait till it happens and take a careful look at the event viewer as you suggested.  By t till then and thanks much!

39

Tweaking.com Support & Help / Re: Windows 7 64 bit Ultimate - mouse or explorer.exe hands up system completely

« on: January 12, 2019, 12:28:17 pm »

OK, so I updated the software and still am not sure that it has recognized the SSD.
Now in German, but I did not see a choice for English.  PICTURE ATTACHED

40

Tweaking.com Support & Help / Re: Windows 7 64 bit Ultimate - mouse or explorer.exe hands up system completely

« on: January 12, 2019, 12:12:07 pm »

Thanks, guys.

Boggin, I have a 2 TB Samsung SSD, so is a checkdisk with /r a thing that applies?

BTW, I have never been able to get the Samsung Magician to work properly; I mean it is runnning but will not "accept the update drive".  By this I mean. it only seems to "see" the Hitachi drive on my system. 

OK, in looking for the version of the software, I see and update is available.  So, I will update and report back.

41

Tweaking.com Support & Help / Re: Windows 7 64 bit Ultimate - mouse or explorer.exe hands up system completely

« on: January 12, 2019, 06:09:51 am »

Thanks, satrow, Still_Game and Boggin.  Happy to know it is not only my W7 that has this problem.
I use Avast Anti-Virus (paid version).  Can I use Malwarebytes (preium) also or should I just switch to MalwareBytes (premium)?
The cost is no important, I just want the best anti-virus.  The cost is nothing compared to the waste of time and annoyance of problems.
Who keeps upwith problems best?

I have WiseCare, Kerrish Doctor and Unhack-me and Advanced System Care 12.1.0.210 along with the Avast Anti-malware.

Are these things doing me any good or just causing problems?

42

Tweaking.com Support & Help / Windows 7 64 bit Ultimate - mouse or explorer.exe hands up system completely

« on: January 11, 2019, 05:09:18 pm »

Hi - You guys helped me some time ago with W7 crashing on this machine.  Thanks for that.

Now, the machine has not had that problem but recently the mouse (or maybe it is explorer.exe) freezes the system.
What I mean is that the mouse and keyboard become unresponsive and whatever programs are funning just stop processing.

I installed a new Logitch driver and Setpoint thingie, but they have not helped the situation.

Sometimes, I notice it when I I grab  window to move it to another part of the screen.

Or, sometimes when I select some text in a window to copy it.

It drives me nuts as I loose work that I need., plus wastes time, etc.

I reboot and then is it good for a day sometimes several days, but I have no idea what is causing it.

My W7 is up tto date with updates.  Thanks in advance for any ehlp.

43

General Computer Support / Re: Windows 7 Ult 64 bit trapped by BSD and can not get out.

« on: June 07, 2018, 06:02:06 am »

Howdy - Another two weeks have gone by with no updates needed and things going smoothly.
Hoping to get update from Samsung on software to get around NO BOOTRCD..

44

General Computer Support / Re: Window 7 32 bit update locked out my NAS and printer

« on: June 01, 2018, 10:20:14 am »

Boggin, I do not understand.

I AM reinstalling the 33.

I never heard of Teredo before.

Where can I get it.  How do I reinstall a printer?  Do you mean use the Brother software?

45

General Computer Support / Re: Window 7 32 bit update locked out my NAS and printer

« on: June 01, 2018, 08:44:19 am »

OK, Boggin.  I tried the next restore point and 33 updates were un-installed.  Printer still not working and Telerdo still code 10.

So, I am reinstalling these 33.

46

General Computer Support / Re: Window 7 32 bit update locked out my NAS and printer

« on: May 31, 2018, 07:39:41 pm »

Howdy Boggin.  I do not know about ASC.

Anyway restoring the point from the last Windows Update did the trick for the NAS.  Now connected to all NAS.

But the Teredo still has a code 10 and I can not print.

I checked Windows updates and now see that that last update was KB3177467.   So, I guess I should justshould never apply that one.

Should I restore another checkpoint to see it another restoreing to the day before will fix the teredo and the printer?

Printer says it is rec3eiving data (on the printer display led) but nothing is printing.

47

General Computer Support / Re: Window 7 32 bit update locked out my NAS and printer

« on: May 31, 2018, 02:54:48 pm »

Boggin, that came up when I went to your link.
So, my mistake, I guess; I will delete this software.
Toledo is now back.
I am doing a resore point, but have to run chkdsk/R on reboot  first; now working.
Will keep you posted.

48

General Computer Support / Re: Window 7 32 bit update locked out my NAS and printer

« on: May 31, 2018, 12:36:43 pm »

OK, this procedure put back the Teredo.
I ran the software, so now I can delete it?
I will use restore point now.

49

General Computer Support / Re: Window 7 32 bit update locked out my NAS and printer

« on: May 30, 2018, 08:47:54 pm »

Thanks, Boggin.  I did all that and even rebooted my router after disconnecting my printer and cat6 and rebooting machine,

No change,  Also the Telredo has disappeared from the  device manager list.

Thsis is one thing I forgot to mention before.  Something I have never seen on this machine ATTACHED.

50

General Computer Support / Re: Window 7 32 bit update locked out my NAS and printer

« on: May 30, 2018, 02:04:41 pm »

OK, I have broken the picture up ATTACHED.