Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jraju

Pages: 1 2 3 [4] 5 6 ... 91
76
Hi, boggins sfc scan did not find any integrity violation.
i will report the next chkdsk result in due course.
i will try the hdd sentinel and report as well a command cli

77
Hi, boggins, i just went to event veiwer and selected application, and after i clicked  find current log in the right side, and then selected wininit as source. and the result is here. i will do the chkdsk again and report it after it finishes.
this is the basis of my query log
Checking file system on C:
The type of the file system is NTFS.

A disk check has been scheduled.
Windows will now check the disk.                         

CHKDSK is verifying files (stage 1 of 5)...
  253696 file records processed.                                          File verification completed.
  1406 large file records processed.                                      0 bad file records processed.                                        2 EA records processed.                                              228 reparse records processed.                                       CHKDSK is verifying indexes (stage 2 of 5)...
  326034 index entries processed.                                         Index verification completed.
  0 unindexed files scanned.                                           0 unindexed files recovered.                                       CHKDSK is verifying security descriptors (stage 3 of 5)...
  253696 file SDs/SIDs processed.                                         Cleaning up 8 unused index entries from index $SII of file 0x9.
Cleaning up 8 unused index entries from index $SDH of file 0x9.
Cleaning up 8 unused security descriptors.
Security descriptor verification completed.
  36170 data files processed.                                            CHKDSK is verifying Usn Journal...
  34159112 USN bytes processed.                                             Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
Read failure with status 0xc000009c at offset 0x35aaa000 for 0x10000 bytes.
Read failure with status 0xc000009c at offset 0x35aaa000 for 0x1000 bytes.
Windows replaced bad clusters in file 53
of name \Users\sar\NTUSER.DAT.
Read failure with status 0xc000009c at offset 0x294349c000 for 0x10000 bytes.
Read failure with status 0xc000009c at offset 0x294448c000 for 0x10000 bytes.
Read failure with status 0xc000009c at offset 0x5ccf66000 for 0x3000 bytes.
Read failure with status 0xc000009c at offset 0x148898e000 for 0x3000 bytes.
Read failure with status 0xc000009c at offset 0x7f8247000 for 0x2000 bytes.
  253680 files processed.                                                 File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
  28824831 free clusters processed.                                         Free space verification is complete.
Adding 1 bad clusters to the Bad Clusters File.
Correcting errors in the Volume Bitmap.
Windows has made corrections to the file system.

 204697599 KB total disk space.
  88920032 KB in 196030 files.
    116864 KB in 36171 indexes.
        16 KB in bad sectors.
    361363 KB in use by the system.
     65536 KB occupied by the log file.
 115299324 KB available on disk.

      4096 bytes in each allocation unit.
  51174399 total allocation units on disk.
  28824831 allocation units available on disk.

Internal Info:
00 df 03 00 10 8b 03 00 17 73 06 00 00 00 00 00  .........s......
c2 02 00 00 e4 00 00 00 00 00 00 00 00 00 00 00  ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

Windows has finished checking your disk.
Please wait while your computer restarts.

78
Hi, boggins, are you suggest , total back up all drives in to a external drive like by macrium reflect or is this different.
I notice the alert only for the profile , windows has replaced bad cllusters.
Does that not imply that bad clusters have been replaced with repair parameters
I ask you to recommend a separate repair, if possible, as every repair is specific.
The fact that just copying one ntuser.dat from other computer or from other working accounts, by renaming the ntuser.dat of the corrupted profile is said to be a fix.
But shane could , by adding this repair, could opt for default profile  and fix with the repair parameters, it would be a boon.
in future, if anybody has this problem, like explorer take much time to load, browsers not working, even boot becomes problematic, if this data goes berserk or corrupted.
i could just select that repairs  as a stand alone repair item and fix my errors , instead of risking all the other things.

79
Hi, If i have corrupted user profile, then there is a possibility of system collpse, including bsod and other kernel errors.
Which repair item in the tool will repair the user profile to remove the bad clusters etc.
just creating and copying, does not seem to fix this corrupted profile.
i do not know, if the correction has been done, without any indication.
if suppose, this feature is not present, i would please reques Shane and boogins team to include this in the repair tool.
if such repair is already present, kindly say which item i have to select.
My OS almost collapse, could not even boot, as i found a alert in suing chkdsk /r, that windows has replaced bad clusters in user/ntuser.dat.i think ntuser.dat is personal comuter settings of the individual about windows behaviour

80
sophos confirmation mail said to have sent email to me .
But it never reached me
boggins , could you suggest an antivirus that has network protection other than avast avg and the other one

81
Hi, i tried bit defender, it is always popping unnecessary things and it annoyed me a lot.
Hi, i tried sophos, but the email confirmation had not been received.
inue
today i said goodbye to the avast , as all the threads have gone to older pages and do not appear in first page.Hi, samson,
would you kindly mention the version full details so that i could also download and enjoy the older protection
I also wish to know from you , if i just do not opt for upgrade, only virus definition update, then i will be safe to ccont

82
Hi, boggins
here are the two pictures that i am getting for activation
please say, if kaspersky is having net protection in free version
i tried sophos home, but failed to get email confirmation to proceed.
if kaspersky has net protection and file protection, then it is good enough.

83
Hi, samson, give me that link , where to download older version of avast of your version
the breach is more to it than meets the eye
please read alll the articles regarding it, i also wrote
Hi, boggins,
please give me the link, where to give my email and set password
should i first download the exe and then supply those things or should i first give details in their web site page.
could you say, if network protection is included in the free version
please give me , what protections it gives
is it better alternative to MSE

84
Hi, boggins, thanks. i have downloaded the software in the link.
It is asking for activation code,
i cannot do any scan , why it is alerting activation code in free version

85
Hi, does kaspersky av has network protection, boggins. I now have mse

86
Hi, for samson,
here is the llink, where i come across
Samson, i know that you use Avast older version, so, you would have been safe with data breach by avast.
and i also know that you view avast forum post.
they just hutdown, the website of jumpshot and no one knows , if it is shut down for the outers and not about insiders.
So, i want a av with network protection, and found mcafee, which i used in my earliler days
Hi, boggins, i will try kaspersky free and tell how it is
the link
https://community.mcafee.com/t5/My-Account-Online/15-Months-Free-Subscription/td-p/528674

87
Hi, some where in the web i read that i could use mcafee antivirus free by going to the mcafee website, clcik my account, and give my email and mcafee password to avail.
i did the same. But i could not get the software download link to install
Hope that boggins give me a solution
i want to switch to alternatives , from aavast, which has comein thenews for data breach recently

88
The weird thing i noticed is , when i changed the font in msword and then copied it to the notepad, it takes notepad default font size and that is the problem. If suppoose , i edit a srt file, all the srt files changes to that font size and not ony those srt files , all the notepad files having  .txt extension becomes to show font size as the cusomized font for the one file.
I think, there may be a fix, but it eludes

89
Hi, it is weird.
i selected one srt file and edited the contents in notepad and saved the file.
i have changed the font size from default to custom size.
i saved it.
When i open, other text files, notepad does not show normal font size, but changed to the cusomized font for all the files.
why and what is the fix for it

90
Hi, boggins,
what i heard is that mp4 itself contains, video, audio subtitles etc in it. There is no separate audio format for it.
If that is the case, then mp4 should play in my tv also, which is not for why I am raising the query.
hot to know the other things , such as bitrate, mpbs in the picture, so that i could try , that also
By the By , how is Shane, Samson and other moderators.
Samson used to give me clues regarding videos.
can i pm Shane. i could talk with you in this forum
i will also write to mbam about white listing of tweaking.com forum

91
Hi, yes.
It is not some months back.
when i search youtube displays , caption and videos in English
But now, the caption is in english, but the video description in Hindi, which i do not know.
I have made the second choice of my language in my regional language.
So, it seems that user does not have any contol over the search items showing languages
anything more on this
Please check it at your end and inform me.
search something in videos, and just play to find it, if it is english english or english ...

92
Hi, the tv supported format is enclosed.
i will not say ,it never plays.
But sometimes, it does not play audios, though my tv supports mp4 ,
mp4 , i think contains the audio also in it, as it supports, all video, audio subtitle etc

93
Hi, sometimes when playing the vido in my samsung tv, the video plays well in mp4 format, but the corresponding mp4a or m4a audio is notplaying
To avoid this, i convert the audio part of the vido as mp3, and it converts to mpeg layer 1/2 mpga.
When i change the m4a default to mp3, the audio is playing but with low audio quality.
Is there any fix for that
my tv supports mp4 video format, naturally known as h264 format. is it correct

94
But when i go to the settings, i find englilsh as the default language.
i have selected another language given there as tamil , my native language
Is the google select the language or we

95
Hi, I know that it is not a low reputed site.
But clicking tweaking com and then suppoprt forum,i get this alert of low reputation
Did you check
Please write to malware bytes not to block this site.

96
General Computer Support / How to get suggested youtube videos in english
« on: October 24, 2019, 09:32:45 pm »
Hi,

When i search a topic, i sued to get youtube videos in english languages. But nowadays , i get Hindi version of suggestion videos in my top search results. The caption or title is in english , but the videos are in hindi, which i do not know.
Could somebody help in fixing this problem.
Is ti search engine google choice or individual choice to see the anguage
i want the videos caption as well as videos explanations also in englishi

97
Hi, Thanks for the tips. I have asked you in the context of using terminal commands in my windows system. Windows system differs from linux.
So, i tried some linux commands in windows, which shows that the command does not exist or inoperable errors.
There the problem arises. Some command line options are given, but when executed in windows cmd, i get this kind of errors.
Ok, thanks to you for the tips.

98
Hi, Samson,
i am not exposed to programming in my days, but i  would love to learn it for simple tasks that need manual ways.
after creating some shortcuts, and using this bat file, the result is achieved. It auto starts and also ran the command to give me the results.
The desktop command, i never heard has been taken from a forum thread.
The other lines are just beginning lines taken from another thread.
Kitty exe is from another thread. By trying so much, now i could execute the task.
Samson, kindly tell, if the ssh session to router is risky, if pw is supplies to the exe window for auto login purpose.
I first tried telent and i heard that it is not safe. I do not know about ssh security, but knows that it is safer than telnet client.
But i have a simple problem. The program opens up, the program window along side the terminal window.
How to not show the program window, is there any trick?
First let me hear from you about the safety of talking  to my router page only with ssh.
And also say, if we can change the router password , by supplying password calender to safeguard the router access by one more layer of security.
i am daily having alerts of router security from google subscription on router risks.
I will share the lines , if router talk is not risky after hearing from you and boggins.
And also tell me where to start my initial level of programming in the present situtation.
I tried automation thro selenium ide, but it is a kind of url passing thro, some other server so, i did not proceed .
expecting your reply

99
Boggin and Samson,
    The main purpose of creating a task to open the router page  is to monitor the speed at any given time or at fixed hours.
The second reason is to avoid group dynamic ips, in which i saw  the speed is reduced to about 3 mbps speed.
The third is automating a task will not harm you , if the ssh is secured with regard to the router remote log in.
One more point is . The terminal actual commands are reboot, config, show, sh, diganostics menu.
In show , if you expand you get one menu status, which i combine to get the show status diagram as per the diagram i enclosed.
What i want is what should effectively continue the automation from the $ prompt to execute the show status.
Group dynamics i came to understand that a big vendor or company gets a bulk of ips, dynamic ips , that are shared with all users of the ISP. But i noticed a reduction of speed of download, when i am allotted in any one of them rather than individual user dynamic ips.
i do not know the reason for it, but i will reboot the router to get the individual dynamic ip, which suddenly restores the speed.
i do not know much about those things.
if i monitor router stat, then these will come in handy and i could just reboot and also watch the dsl speed without any third party programs

100
Hi, Samson, using klink.exe of kitty alert for password and the passowrd is not visible to verify. If it is correct, then it allows to $ prompt and from there i could just issue command Show Status to get the result. But GIVING Passoword for everylogon is annoying.
GUI version allows the remote command to be executed without any password .
Please see the enclosed txt file

Pages: 1 2 3 [4] 5 6 ... 91