Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - rhuffman

Pages: [1] 2 3 ... 5
General Computer Support / Re: Hard Drives
« on: August 09, 2018, 02:14:22 pm »
Got it fixed, turns out the ssd drive was using the sata 1 port address. Disconnected 2 nd ssd connection and plugged sata drive into that sata port and all drives are working fine.

General Computer Support / Hard Drives
« on: August 06, 2018, 12:30:55 am »
Hey guys I just bought a ASUS ROG Desktop. It came with a 250 GIG SSD and a Seagate 1tb SATA Drive. All work great. I bought a 2nd 4 TB Seagate SATA Drive and hooked it up to the 2nd sata channel and neither drives show up or sometimes only one of the sata drives show up in file manager or disk management. If I hook them up by themselves they work fine. I have contacted ASUS and they told me to update the bios to version 305 which I did. Still does not work and trying to get a straight anser from them is impossible. In the bios the drives show up when only 1 sata is hooked up, but does not when both sata are hooked up. Any ideas guys ?

Just installed the latest video driver and it seems that was the problem :) Just sent a email and Windows Explorer has not crashed.

Here is the printout

SFCFix version by niemiro.
Start time: 2018-04-21 16:46:21.068
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.

CORRUPT: C:\Windows\winsxs\amd64_microsoft-windows-a..xperience-inventory_31bf3856ad364e35_6.1.7601.24085_none_e8ae3348fecc7a74\dismprov.dll

SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or
   CBS & SFC total detected corruption count:     1
   CBS & SFC total unimportant corruption count:  0
   CBS & SFC total fixed corruption count:        0
   SURT total detected corruption count:          0
   SURT total unimportant corruption count:       0
   SURT total fixed corruption count:             0
AutoAnalysis:: directive completed successfully.

Successfully processed all directives.

Failed to generate a complete zip file. Upload aborted.

SFCFix version by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2018-04-21 17:04:52.679

I am assuming that is is to do with my video driver.

Hi guys have Internet Explorer, Explorer, Crashing on me and Windows Live Mail Crashes/Freezes when i send mail (i can receive mail no problem) Ran SFC and it found corrupt files but cannot fix them, says to read the cbs.log file but the sucker is huge and i cannot understand it. Have run the tweaking program. Still not good. I just download the latest version and am trying it again. Any suggestions?

General Computer Support / Re: VLC Media Player and other media players
« on: February 14, 2018, 10:13:22 am »
I did reset ie a few times, so far so good. But that was sure weird, 1 st time that has happened. Thanks :)

General Computer Support / Re: VLC Media Player and other media players
« on: February 14, 2018, 12:19:38 am »
Looks like it was the ati video driver was corrupt, still getting ie errors sometimes but so far vidros are playing.

General Computer Support / VLC Media Player and other media players
« on: February 13, 2018, 09:39:06 pm »
Hey guys got a problem, I cannot play any videos files with any video player in windows 7 they all crash (VLC Media Player, DivX and WIndows Media player). Tried with mov's mkv's mp4's and even the vod formats. ALl crash. But if I love windows 7 in safe mode the videos will play fine. I have run tweaking program twice now and still I cannot figure this out.

General Computer Support / Re: Cannot see Port error in Bitcomet
« on: November 20, 2017, 09:58:23 pm »
Well Shanes Windows repair fixed the port problem, thanks a lot Shane :)

General Computer Support / Re: Cannot see Port error in Bitcomet
« on: November 20, 2017, 11:56:56 am »
No I am running it on the Windows 7 partition on my I7 PC

General Computer Support / Re: Cannot see Port error in Bitcomet
« on: November 20, 2017, 04:26:23 am »
I mean Shane's app that he wrote, darn auto correct on my MAC

General Computer Support / Re: Cannot see Port error in Bitcomet
« on: November 20, 2017, 04:06:21 am »
Will try that, am running shakes app right now and iy looks like it will not be done until mid morning

General Computer Support / Re: Cannot see Port error in Bitcomet
« on: November 20, 2017, 02:26:48 am »
I think the VPN software screwed a setting in my windows but for the life of me I cannot figure it out. Like I said when I reboot into win 10 and load bitcomet it works fine (dual booting). And all of the computers in house work fine, just my windows 7 bitcomet not working, any other torrent program on the windows 7 works fine.

General Computer Support / Cannot see Port error in Bitcomet
« on: November 19, 2017, 09:16:17 pm »
Hi guys, got a problem, I installed 3 different VPN free softwares and I could not get any of them to work so I un-installed them and ran ccleaner to remove what was not removed and deleted references to the programs in the registry. Now when I load bitcomet it says "Can not listen to port 25615, (25615UDP)" I am dual booting with windows 10 so I booted into 10 and installed bitcomet and it works fine. So the vpn software has screwed up settings for bitcomet, I checked windows firewall and it is being allowed to send data out. Am stumped.(:

General Computer Support / Re: RAID
« on: April 14, 2017, 12:45:14 pm »
Cool. I booted my computer up without the cages on and when windows was booted up I turned the sans on and all the drives showed up, ran chkdsk on them all and all fine. Tagged a bunch of torrents and downloaded files overnight and it is still going with no errors. The mouse is still jittery with the sans running. I then turn the other raid cage on and all good. Moving files from both cages. I think I will reinstall the driver for the sans (jbod driver).

General Computer Support / RAID
« on: April 13, 2017, 10:08:18 pm »
Hey guys i just bought from ebay a couple of RAID Cages with drives. They are a SANS DIGITAL TowerRAID TR4M eSATA 4-drive tower JBOD/RAID w/Four 2TB Hard Drives (Setup up using JBOD), this connects through a ESATA card and a OWC MERCURY ELITE-AL PRO Qx2 - 8TB OF STORAGE (4 2 tb drives)(Setup up as RAID 5), this connects via USB. When i am fully booted up my mouse is acting jerky and i sometimes get the blue screen of death in Windows 7 Home Premium. Can these 2 cages conflict with each other. Also the Sans sometimes locks up when i try to run a chkdsk on drives 2 3 4. I copied over 1tb of files to drive 1 with no problems. I have taken the drives out and connected them to my docking station and all loaded fine and checked out fine using chkdsk. Any suggestions ????

General Computer Support / Re: Windows 7 Password Forgot
« on: November 07, 2016, 01:09:15 pm »
Ok Sorry, will not talk of this topic again. Thanks

General Computer Support / Re: Windows 7 Password Forgot
« on: November 06, 2016, 06:29:52 pm »
Thanks got it fixed, deleted password, but it will not let me put a new password in when I am in windows user. Will try rebooting with program on usb stick and try to enter new password there.

General Computer Support / Windows 7 Password Forgot
« on: November 06, 2016, 03:01:23 pm »
Hey guys my wife brought home a laptop from a elderly lady and the woman cannot remember the login password. Is there a free program that I can download that will let me get the password. All the programs I have downloaded so far wants money. Not going to spend money since it is not my computer.

General Computer Support / WDTV (Western Digital TV Box)
« on: October 06, 2016, 11:04:18 pm »
Anyone have one of these? When I first got it I could access all usb drives connected to it from all my pc's and imac. Now only the imac can see the usb drives and copy from them. I cannot write to them from the imac (drives are NTFS). On the pc's now I only see a WDTV listed under networks and when I click on it it loads the WDTV web page to logon and edit the settings for the drive. Before there was also another wdtv and when I clicked on it it expanded to show all drives connected to the WDTV. Am confused as to why all of a sudden this has happened. All the usb drives have sharing set via windows 7.

That's my next step but have to figure out which ones they are in the device manager.

I need to buy a server cage to hold 4 - 8 8 tb drives :)

A 5 tb drive, 3 x 2 tb drives, a 1 tb drive, a 500 GIG drive. (Also have a 4 tb and a 3 tb drive not conneted - ran out of usb connections - using a uhb powered hub. and the internal drive 2 tb drive :) Im a Space Junkie :):):):):):)

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.


Microsoft DiskPart version 6.1.7601
Copyright (C) 1999-2008 Microsoft Corporation.
On computer: RICHARD-HP

DISKPART> list disk

  Disk ###  Status         Size     Free     Dyn  Gpt
  --------  -------------  -------  -------  ---  ---
  Disk 0    Online         1863 GB  1024 KB
  Disk 1    Online         1863 GB  7168 KB
  Disk 2    Online         1863 GB  7168 KB
  Disk 3    No Media           0 B      0 B
  Disk 4    No Media           0 B      0 B
  Disk 5    No Media           0 B      0 B
  Disk 6    No Media           0 B      0 B
  Disk 7    Online         1862 GB      0 B
  Disk 8    Online          465 GB  1024 KB
  Disk 9    Online          931 GB      0 B
  Disk 10   Online         4657 GB  7168 KB


Just looked again, have 4 card readers drives n o p are called removable disks so I assume drive h would be the 4th card reader. But I do not have cards for all these readers, just have a SD card.

Pages: [1] 2 3 ... 5