Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Boggin

Pages: 1 2 [3] 4 5 ... 383
51
That's great news and thanks for the update.

52
So are you able to boot into Safe Mode yet ?

Can you check Event Viewer to see if it recorded anything for when the machine crashed.

53
Using your restore points may resolve your password problem but you could also run those cmds I've suggested.

It could be a memory problem.

This article will walk you through a memory test in Win 10 -

https://www.c-sharpcorner.com/article/windows-10-memory-diagnostic-tool/

You could try clearing the temp folder cache to see if that helps with the freezes.

In the search box type %temp% and press enter when it comes up.

If that is highly populated then press CTRL and a together to highlight then CTRL and d together to delete and confirm.

54
Can you check to see if you have any restore points prior to running the repairs.

To access the restore points, in the Search box type rstrui.exe and press enter then when it opens, check the box to Choose a different restore point.

If you have one then click on one and follow the prompts.

This is best done in Safe mode to eliminate your antivirus program getting in the way, but as you can't access Safe Mode then you could disable your antivirus program before selecting your restore point.

A couple of commands run from either a Command Prompt (Admin) or Powershell (Admin) can usually resolve Win 10 problems.

These are -

dism /online /cleanup-image /startcomponentcleanup

dism /online /cleanup-image /restorehealth

sfc /scannow

Enter exit to close the cmd window.

55
Shane is now fully recovered so I've asked him to have a look at your thread.

He does have a lot of work to catch up on so there could be a delay in his response.

56
General Computer Support / Re: Tascam Us-1800 Stopped Working Today
« on: October 07, 2021, 08:38:45 AM »
Press and hold SHIFT throughout a Restart.

Click on Troubleshoot - Advanced options - Start-up Settings - Restart

Press F5

In that mode Win 10 disables wireless so you can either Ethernet connect or click on the wifi icon then on your SSID and then on Connect.

Left click away to close that pane where you will then see a full wifi icon.

You can then download and install the driver as normal.

Just reboot to return to normal mode.

57
Tweaking.com Support & Help / Re: Support for windows 11
« on: October 06, 2021, 01:44:22 PM »
You may be interested in this article before you upgrade to Win 11 -

https://www.techspot.com/news/91583-windows-11-now-available-memory-leaks-performance-sacrifices.html

58
Feedback & Suggestions / Re: for kind attention of the admins tim and jim
« on: October 06, 2021, 02:05:08 AM »
Shane is normally quite busy with keeping WR up to date as well as maintaining a computer repair business.

When he was active on the forum he almost ran himself into the ground with the pressure of work.

This is why he has left the forum to me and Julian (when Julian is bothered to come onto the forum) but anything WR related or if there is something I'm unable to help with, I will pass that onto either Shane or jpm.

However, Shane is currently recovering from Covid which has taken its toll on him.

59
Tweaking.com Support & Help / Re: Support for windows 11
« on: October 06, 2021, 01:57:08 AM »
Shane is in the process of updating WR for Win 11 but he's recovering from Covid which has left him quite weak, so don't know when he will be able to complete that.

If Win 11 has any bugs in it though, it is unlikely that WR will be able to resolve those.

Have you received the Win 11 update yet ?

60
General Computer Support / Re: Tascam Us-1800 Stopped Working Today
« on: October 05, 2021, 03:29:54 AM »
In Event Viewer if Event Viewer (Local) isn't highlighted then click on it and when it has read the data, check to see if any Critical have been recorded.

If not, click on Error and then on View All Instances of This Event in the lower right pane.

From there you can click on events with a date and time stampr for when your computer crashed.

The access denied code could be because of your antivirus program blocking the driver install, which is why I suggested trying to install it in Safe Mode with Networking.

This is a link for its manual which has a troubleshooting section which may help.

I haven't downloaded it to check.

https://www.manualslib.com/manual/263931/Tascam-Us-1800.html?page=18

61
General Computer Support / Re: Tascam Us-1800 Stopped Working Today
« on: October 04, 2021, 01:33:14 AM »
So does your printer still work ?

62
General Computer Support / Re: Tascam Us-1800 Stopped Working Today
« on: October 03, 2021, 02:56:24 PM »
That code is an Access Denied and could be caused by your antivirus program.

Providing you are choosing the correct driver, you could try installing it in Safe Mode with Networking.

If that doesn't resolve then try a restore point back to when it was working but make a note of the programs affected.

Does the device work in Safe Mode with Networking ?

Is there any way you could test the cable or get hold of another ?

From a Google, cables going down can be an issue.

63
General Computer Support / Re: Tascam Us-1800 Stopped Working Today
« on: October 03, 2021, 12:25:35 PM »
Have you tried your restore points back to when it was working.

Checking to see which programs are affected could give you a clue as to a possible cause if a recent download.

Can you try another USB port.

64
Feedback & Suggestions / Re: Problem in all versions post v 4.9 on W7
« on: September 28, 2021, 04:04:07 AM »
From your repair log I don't see what you are complaining about.

65
Feedback & Suggestions / Re: Problem in all versions post v 4.9 on W7
« on: September 28, 2021, 02:15:35 AM »
I've just had a look at your repair log but I'm not sure what you are complaining about.

It looks about the same as I get, although I thought you had run it more recent than March this year.

66
Feedback & Suggestions / Re: Problem in all versions post v 4.9 on W7
« on: September 27, 2021, 02:43:21 AM »
I've asked Shane to look at your thread but as he's getting over Covid, I'm not sure when I'll get a reply.

67
Feedback & Suggestions / Re: Problem in all versions post v 4.9 on W7
« on: September 24, 2021, 09:17:33 AM »
Search the forum and let me know how many serious complaints you find about the program.

I've used it a number of times as trials without any adverse effects.

How does what you have found affect the program.

I ran it on my Win 7 and there were none of the files you have found.

Check out v4.11.6 to see if it still produces what you have found.

It may be academic though as Shane is working on a new version that will incorporate Win 11.

68
Feedback & Suggestions / Re: Problem in all versions post v 4.9 on W7
« on: September 24, 2021, 07:18:13 AM »
As the program runs fine as you've previously said, why are you bothering with this ?

Most people who have used this program are full of praise for it.

The program has moved on from 4.9 and Shane is currently adding Win 11 to it.

69
Thanks for the update and that you have found the cause, but I would leave Windows updates enabled as Win 11 is to be released from 5th Oct.

70
Do you get any error messages/codes when it fails to start ?

You could try the trouble shooter -

Settings → Update & Security → Troubleshoot → Windows Update → Troubleshoot → Additional troubleshooter and click on the Windows update troubleshooter from the list then click on the button ?Run the troubleshooter?. It will automatically detect the problem and fix it for you.

71
Can you open a Command Prompt (Admin) or a Powershell (Admin) and enter these cmds -

You can copy & paste them.

net stop wuauserv

net stop cryptSvc

net stop bits

net stop msiserver

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

ren C:\Windows\System32\catroot2 catroot2.old

net start wuauserv

net start cryptSvc

net start bits

net start msiserver

shutdown /r /t 00

See if that service reports as starting.

72
Can you perform those cmds I suggested and then see how things are after the reboot.


73
I assume you are using Win 10 ?

Open a Command Prompt (Admin) or Powershell (Admin) and enter these cmds -

dism /online /cleanup-image /restorehealth

sfc /scannow

shutdown /r /t 00

Then see if that service will start after the reboot.

You may want to see if there any Definition updates for ZoneAlarm to see if the services are still started with it enabled.

74
I've found that is part of ZoneAlarm so that could be causing the access denied.

Can you disable either that or ZoneAlarm and try your updates again.

75
What is that TrueVector Internet Monitor ?

Pages: 1 2 [3] 4 5 ... 383